plugout.net

Hi,

i've patched firmware with "fvdw-sl-17.0-patch_05-26feb18.zip"



and now with web interface



Thanks in advance !

Best regards,

Hi Basajaun

It is an amazing issue as the patch has been installed with successful by other users

So at least the nas boot and it is detected by fvdw-sl assistant. Then it seems the web server failed to start.

To investigate the issue, please to post after opening a shell window:

Code: Select all

ps ax
cat /boot.log

Hi Jocko,

sorry for delay. Here you are

Code: Select all

start boot log
detect and set platform
5big1
5big1
UIMAGE-3142-5BIG1-11
Current kernel: 3.14.2 #11 Mon Feb 27 18:10:55 CET 2017
5big1
 mount dev/pts
update dev nodes
booting using  root file system...
enable IP forwarding...
run udevstart to update dev nodes when necessary
inserting kernel modules:
start buttons control daemon
device = 5big1
source = buttons-nwsp2
buttons-nwsp2 daemon started
Tue Jun 19 11:49:56 CEST 2018
create temporary passwd file
create temporary group file
configure loopback network interface
setting reboot and standby
5big1
rebootd-isp1
5big1
standbyd-isp1
start fan
starting php based setup routines step 1
 * Initialize the volatile db file...    [ OK ]
 * Starting udevd...                 [ OK ]
 * Finishing restore RAID devices...     [ OK ]
 * Found database configuration file...    [ OK ]
 * Updating Disks database...           [ OK ]
 * Starting mount of volumes...
   - Mounting volume Vol-A:  [ OK ]
 * Finishing mount of volumes...        [ OK ]
 * Generating Hosts File...           [ OK ]
 * Configuring System Hostname...        [ OK ] 
 * Configuring LAN interface...        [ OK ]
 * Initializing Timezone...           [ OK ]
 * Starting web server...              [ OK ]
 * Starting mount of internal USB ...
 * Finishing mount internal USB ...     [ OK ]
 * Configuring Disks...              [ OK ]
 * Configuring Samba...                [ OK ]
 * Configuring System Users...
   Root password: use default password
   Set users, linux and samba accounts    [ OK ]
 * Starting Fvdw-sl Discovery Daemon...    [ OK ]
start rpcbind service
starting php based setup routines step 2
 * Starting dropbear...              [ OK ]
 * Kill temporary dropbear...          [ OK ]
starting php based setup routines step 3
 * Starting daemon update Hosts File...  [ OK ]
 * Starting NTP Server ...              [ OK ]
 * Starting mount of remote shares...
 * Finishing mount shares...           [ OK ]
 * Starting NTP client...              [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
    This is fvdw-sl version: fvdw-sl 17.0 patched
    built on: May 28 2017

    LAN IP address: 172.16.100.83 (static)

    Port configuration:

    LAN   -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move smbd en nmbd db files away from ram disk to prevent hanging samba server
LED settings
else loop1 finished
rcS finished


Please, could you check dmess.log that is attached ?


Thanks in advance

Best regards

Webserver is started according boot.log

Check if it is really running

Code: Select all

ps -ef | grep httpd

If it is running then something has happened with the folder containing containing webpages (/usr/htdocs) or you have modified manually the apache conf file??

Hi fvdw,

no, i have not modified httpd.conf

Have you seen dmesg.log ?

Thanks in advance.

Best regards,

Hi basajaun, no I did not look in dmesg file yet. I am not at home and connect by phone.

What was the ouput of the command I posted?

I looked at your dmesg file but it seems you have a disk(s) problems on ata2,3 and 4 it loose connection. Is your power supply oke?

Hi fvdw,

perhaps all my problems are on power supply ?

Thanks in advance !

Best regards,

Hi fvdw,

i'm waiting for a new power supply.

Thanks in advance.

Best regards,

Hi Basajaun,

For your understanding, these errors explain why disk init task failed (disks regularly link up/down)

What is your disks in last four slots (sd[bcde])? are they different of sda disk ?