Error creating Raid 5

[b1gnas]

Code: Select all

root@(none):/sda7/boot # ls -a /sda7
.           bin         clunc       etc         lost+found  opt         sbin        usr
..          bin_cab     dev         lib         mail        proc        share       var
.mldonkey   boot        direct-usb  linuxrc     nowhere     root        sys
root@(none):/sda7/boot #


[Jocko]

Oups again an error...
lacie-boot folder is set later.
So do

Code: Select all

mkdir /sda7/lacie-boot
touch /sda7/lacie-boot/sda1boot

[b1gnas]

Code: Select all

root@fvdwsl-base:/ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #1 Thu Jan 8 23:24:14 CET 2015
[    0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: LaCie 5Big1 Network
[    0.000000] Clearing invalid memory bank 0KB@0x00000000
[    0.000000] Clearing invalid memory bank 0KB@0x00000000
[    0.000000] Clearing invalid memory bank 0KB@0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c03de85c, node_mem_map c7efb000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro boardType=mv88F5281 productType=5Big reset=0
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 125736K/131072K available (2809K kernel code, 158K rwdata, 848K rodata, 114K init, 206K bss, 5336K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc039a7f0   (3658 kB)
[    0.000000]       .init : 0xc039b000 - 0xc03b78c8   ( 115 kB)
[    0.000000]       .data : 0xc03b8000 - 0xc03df9e0   ( 159 kB)
[    0.000000]        .bss : 0xc03df9e0 - 0xc04135c0   ( 207 kB)
[    0.000000] NR_IRQS:64
[    0.000016] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[   20.499435] Console: colour dummy device 80x30
[   20.499474] Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
[   20.559130] pid_max: default: 32768 minimum: 301
[   20.559336] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[   20.559364] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[   20.560204] CPU: Testing write buffer coherency: ok
[   20.560721] Setting up static identity map for 0x2a8b20 - 0x2a8b5c
[   20.564200] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
[   20.565162] NET: Registered protocol family 16
[   20.566040] DMA: preallocated 256 KiB pool for atomic coherent allocations
[   20.569229] 5big1 init started
[   20.569258] Orion ID: MV88F5281-D0. TCLK=166666667.
[   20.569319] Orion: Applying 5281 D0 WFI workaround.
[   20.569668] 5big1 init 1
[   20.569689] initial MPP regs: 00000003 00000000 00170000
[   20.569729]   final MPP regs: 00000003 00000000 00170000
[   20.569758] 5big1 init 2
[   20.569774] net5big: powering up SATA drives
[   20.569795] 5big1 init 3
[   20.569808] 5big1 init 4
[   20.570164] 5big1 init 5
[   20.571106] 5big1 init 6
[   20.571434] 5big1 init 7
[   20.571763] 5big1 init 8
[   20.572099] 5big1 init 9
[   20.572430] 5big1 init 10
[   20.573075] 5big1 init 11
[   20.573403] 5big1 init 12
[   20.573426] net5big: turning off power-off control GPIO
[   20.573449] net5big: Flash writing is not yet supported.
[   20.573464] 5big1 init end
[   20.574410] orion_gpio_is_valid: invalid GPIO 20
[   20.574433] orion_gpio_is_valid: invalid GPIO 20
[   20.574450] net5big_pci_preinit failed to gpio_request 20
[   20.575003] PCI host bridge to bus 0000:00
[   20.575047] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[   20.575077] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[   20.575107] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[   20.575169] pci 0000:00:00.0: [11ab:5281] type 00 class 0x058000
[   20.575217] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
[   20.575251] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x07ffffff]
[   20.575821] PCI: bus0: Fast back to back transfers disabled
[   20.575861] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[   20.576416] PCI host bridge to bus 0000:01
[   20.576460] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff]
[   20.576489] pci_bus 0000:01: root bus resource [io  0x10000-0x1ffff]
[   20.576519] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[   20.576591] pci 0000:01:00.0: [11ab:5281] type 00 class 0x058000
[   20.576648] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x07ffffff 64bit pref]
[   20.576686] pci 0000:01:00.0: reg 0x18: [mem 0x10000000-0x1fffffff 64bit pref]
[   20.576724] pci 0000:01:00.0: reg 0x20: [mem 0xf1000000-0xf10fffff 64bit]
[   20.576759] pci 0000:01:00.0: reg 0x30: [mem 0xe0000000-0xe7ffffff pref]
[   20.576823] pci 0000:01:00.0: supports D1 D2
[   20.576849] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[   20.577414] pci 0000:01:07.0: [11ab:6081] type 00 class 0x010000
[   20.577478] pci 0000:01:07.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit]
[   20.577515] pci 0000:01:07.0: reg 0x18: [io  0xf0100000-0xf01000ff]
[   20.578118] PCI: bus1: Fast back to back transfers enabled
[   20.578157] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   20.578236] pci 0000:01:07.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit]
[   20.578280] pci 0000:01:07.0: BAR 2: assigned [io  0x10000-0x100ff]
[   20.607860] bio: create slab <bio-0> at 0
[   20.609275] vgaarb: loaded
[   20.610590] SCSI subsystem initialized
[   20.611539] libata version 3.00 loaded.
[   20.613383] usbcore: registered new interface driver usbfs
[   20.613762] usbcore: registered new interface driver hub
[   20.614186] usbcore: registered new device driver usb
[   20.617280] Switched to clocksource orion_clocksource
[   20.645288] NET: Registered protocol family 2
[   20.646159] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[   20.646217] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[   20.646266] TCP: Hash tables configured (established 1024 bind 1024)
[   20.646373] TCP: reno registered
[   20.646400] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   20.646455] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   20.646762] NET: Registered protocol family 1
[   20.646852] PCI: CLS 32 bytes, default 32
[   20.649588] futex hash table entries: 256 (order: -1, 3072 bytes)
[   20.650520] VFS: Disk quotas dquot_6.5.2
[   20.650621] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   20.650883] msgmni has been set to 245
[   20.653569] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   20.653598] io scheduler noop registered
[   20.653617] io scheduler deadline registered
[   20.653659] io scheduler cfq registered (default)
[   20.654141] mv_xor mv_xor.0: Marvell shared XOR driver
[   20.669157] mv_xor mv_xor.0: Self-test copy failed compare, disabling
[   20.680785] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   20.702724] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3, base_baud = 10416666) is a 16550A
[   21.228252] console [ttyS0] enabled
[   21.251170] brd: module loaded
[   21.263635] loop: module loaded
[   21.267383] Uniform Multi-Platform E-IDE driver
[   21.272571] ide-gd driver 1.18
[   21.277083] sata_mv 0000:01:07.0: version 1.28
[   21.277744] sata_mv 0000:01:07.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
[   21.316786] scsi0 : sata_mv
[   21.320778] scsi1 : sata_mv
[   21.324632] scsi2 : sata_mv
[   21.328506] scsi3 : sata_mv
[   21.332388] scsi4 : sata_mv
[   21.336261] scsi5 : sata_mv
[   21.340168] scsi6 : sata_mv
[   21.344047] scsi7 : sata_mv
[   21.347683] ata1: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8022000 irq 52
[   21.355361] ata2: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8024000 irq 52
[   21.363017] ata3: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8026000 irq 52
[   21.370669] ata4: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8028000 irq 52
[   21.378302] ata5: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8032000 irq 52
[   21.385955] ata6: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8034000 irq 52
[   21.393610] ata7: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8036000 irq 52
[   21.401264] ata8: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8038000 irq 52
[   21.410798] sata_mv sata_mv.0: version 1.28
[   21.411028] sata_mv sata_mv.0: cannot get optional clkdev
[   21.418631] sata_mv sata_mv.0: slots 32 ports 5
[   21.442361] scsi8 : sata_mv
[   21.446258] scsi9 : sata_mv
[   21.450184] scsi10 : sata_mv
[   21.454164] scsi11 : sata_mv
[   21.458139] scsi12 : sata_mv
[   21.461929] ata9: SATA max UDMA/133 irq 29
[   21.466023] ata10: SATA max UDMA/133 irq 29
[   21.470235] ata11: SATA max UDMA/133 irq 29
[   21.474411] ata12: SATA max UDMA/133 irq 29
[   21.478583] ata13: SATA max UDMA/133 irq 29
[   21.484201] tun: Universal TUN/TAP device driver, 1.6
[   21.489271] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   21.495839] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   21.504806] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   21.521441] libphy: orion_mdio_bus: probed
[   21.525904] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   21.611620] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:86:ea:3a
[   21.622677] aoe: cannot create debugfs directory
[   21.627521] aoe: AoE v85 initialised.
[   21.632251] i2c /dev entries driver
[   21.640384] rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6
[   21.653694] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
[   21.662070] at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
[   21.686901] Netfilter messages via NETLINK v0.30.
[   21.692011] ipip: IPv4 over IPv4 tunneling driver
[   21.698209] TCP: cubic registered
[   21.701572] NET: Registered protocol family 17
[   21.706034] NET: Registered protocol family 5
[   21.712407] console [netcon0] enabled
[   21.716065] netconsole: network logging started
[   21.722192] rtc-rs5c372 0-0032: setting system clock to 2015-09-23 14:43:45 UTC (1443019425)
[   21.909178] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   21.949216] ata1.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[   21.955386] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   22.019227] ata1.00: configured for UDMA/133
[   22.024003] scsi 0:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[   22.033077] fvdw1 disk index before get_sd_name = 0
[   22.037943] device-name= sata_mv
[   22.041195] fvdw2 disk index after get_sd_name = 4
[   22.045967] fvdw3 prefix[0]=s  prefix[1]=d
[   22.050071] fvdw4 diskname = sde
[   22.054291] sd 0:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[   22.061969] sd 0:0:0:0: [sde] 4096-byte physical blocks
[   22.069205] sd 0:0:0:0: [sde] Write Protect is off
[   22.074000] sd 0:0:0:0: [sde] Mode Sense: 00 3a 00 00
[   22.074285] sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   22.131100]  sde: sde4 < sde5 sde6 sde7 sde8 >
[   22.139889] sd 0:0:0:0: [sde] Attached SCSI disk
[   22.549143] ata9: failed to resume link (SControl 0)
[   22.554115] ata9: SATA link down (SStatus 0 SControl 0)
[   22.569183] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   22.609237] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[   22.615428] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   22.839240] ata2.00: configured for UDMA/133
[   22.843990] scsi 1:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[   22.853072] fvdw1 disk index before get_sd_name = 1
[   22.857939] device-name= sata_mv
[   22.861191] fvdw2 disk index after get_sd_name = 3
[   22.865964] fvdw3 prefix[0]=s  prefix[1]=d
[   22.870066] fvdw4 diskname = sdd
[   22.874254] sd 1:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[   22.881930] sd 1:0:0:0: [sdd] 4096-byte physical blocks
[   22.889055] sd 1:0:0:0: [sdd] Write Protect is off
[   22.893883] sd 1:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[   22.894174] sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   22.951160]  sdd: sdd4 < sdd5 sdd6 sdd7 sdd8 >
[   22.959974] sd 1:0:0:0: [sdd] Attached SCSI disk
[   23.389175] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   23.429217] ata3.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[   23.435393] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   23.499228] ata3.00: configured for UDMA/133
[   23.503976] scsi 2:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[   23.513053] fvdw1 disk index before get_sd_name = 2
[   23.517923] device-name= sata_mv
[   23.521176] fvdw2 disk index after get_sd_name = 2
[   23.525956] fvdw3 prefix[0]=s  prefix[1]=d
[   23.530058] fvdw4 diskname = sdc
[   23.534283] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[   23.541957] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[   23.549092] sd 2:0:0:0: [sdc] Write Protect is off
[   23.553919] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   23.554213] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.609147]  sdc: sdc4 < sdc5 sdc6 sdc7 sdc8 >
[   23.618002] sd 2:0:0:0: [sdc] Attached SCSI disk
[   24.049176] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   24.089217] ata4.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[   24.095395] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   24.159227] ata4.00: configured for UDMA/133
[   24.163990] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[   24.173087] fvdw1 disk index before get_sd_name = 3
[   24.177958] device-name= sata_mv
[   24.181211] fvdw2 disk index after get_sd_name = 1
[   24.185983] fvdw3 prefix[0]=s  prefix[1]=d
[   24.190085] fvdw4 diskname = sdb
[   24.194316] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[   24.201993] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[   24.209114] sd 3:0:0:0: [sdb] Write Protect is off
[   24.213946] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   24.214237] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.261855]  sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 >
[   24.270773] sd 3:0:0:0: [sdb] Attached SCSI disk
[   24.709177] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   24.749217] ata5.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[   24.755386] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   24.819227] ata5.00: configured for UDMA/133
[   24.823987] scsi 4:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[   24.833101] fvdw1 disk index before get_sd_name = 4
[   24.837969] device-name= sata_mv
[   24.841219] fvdw2 disk index after get_sd_name = 0
[   24.845992] fvdw3 prefix[0]=s  prefix[1]=d
[   24.850095] fvdw4 diskname = sda
[   24.854327] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[   24.862002] sd 4:0:0:0: [sda] 4096-byte physical blocks
[   24.869152] sd 4:0:0:0: [sda] Write Protect is off
[   24.873947] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   24.874237] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.921947]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[   24.933297] sd 4:0:0:0: [sda] Attached SCSI disk
[   25.209172] ata6: SATA link down (SStatus 0 SControl 300)
[   25.559168] ata7: SATA link down (SStatus 0 SControl 300)
[   25.909172] ata8: SATA link down (SStatus 0 SControl 300)
[   26.979143] ata10: failed to resume link (SControl 0)
[   26.984203] ata10: SATA link down (SStatus 0 SControl 0)
[   28.059145] ata11: failed to resume link (SControl 0)
[   28.064204] ata11: SATA link down (SStatus 0 SControl 0)
[   29.139143] ata12: failed to resume link (SControl 0)
[   29.144204] ata12: SATA link down (SStatus 0 SControl 0)
[   30.219145] ata13: failed to resume link (SControl 0)
[   30.224205] ata13: SATA link down (SStatus 0 SControl 0)
[   30.231265] EXT3-fs (sda7): recovery required on readonly filesystem
[   30.237608] EXT3-fs (sda7): write access will be enabled during recovery
[   60.656772] ata5.00: exception Emask 0x0 SAct 0x3ffff SErr 0x0 action 0x6 frozen
[   60.664181] ata5.00: failed command: READ FPDMA QUEUED
[   60.669350] ata5.00: cmd 60/08:00:d8:7d:52/00:00:00:00:00/40 tag 0 ncq 4096 in
[   60.669350]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.683921] ata5.00: status: { DRDY }
[   60.687582] ata5.00: failed command: READ FPDMA QUEUED
[   60.692757] ata5.00: cmd 60/08:08:e0:7d:52/00:00:00:00:00/40 tag 1 ncq 4096 in
[   60.692757]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.707325] ata5.00: status: { DRDY }
[   60.711000] ata5.00: failed command: READ FPDMA QUEUED
[   60.716156] ata5.00: cmd 60/08:10:e8:7d:52/00:00:00:00:00/40 tag 2 ncq 4096 in
[   60.716156]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.730722] ata5.00: status: { DRDY }
[   60.734384] ata5.00: failed command: READ FPDMA QUEUED
[   60.739561] ata5.00: cmd 60/08:18:f0:7d:52/00:00:00:00:00/40 tag 3 ncq 4096 in
[   60.739561]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.754128] ata5.00: status: { DRDY }
[   60.757790] ata5.00: failed command: READ FPDMA QUEUED
[   60.762965] ata5.00: cmd 60/08:20:f8:7d:52/00:00:00:00:00/40 tag 4 ncq 4096 in
[   60.762965]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.777533] ata5.00: status: { DRDY }
[   60.781209] ata5.00: failed command: READ FPDMA QUEUED
[   60.786364] ata5.00: cmd 60/08:28:00:7e:52/00:00:00:00:00/40 tag 5 ncq 4096 in
[   60.786364]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.800930] ata5.00: status: { DRDY }
[   60.804592] ata5.00: failed command: READ FPDMA QUEUED
[   60.809769] ata5.00: cmd 60/08:30:08:7e:52/00:00:00:00:00/40 tag 6 ncq 4096 in
[   60.809769]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.824337] ata5.00: status: { DRDY }
[   60.827998] ata5.00: failed command: READ FPDMA QUEUED
[   60.833174] ata5.00: cmd 60/08:38:10:7e:52/00:00:00:00:00/40 tag 7 ncq 4096 in
[   60.833174]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.847742] ata5.00: status: { DRDY }
[   60.851417] ata5.00: failed command: READ FPDMA QUEUED
[   60.856573] ata5.00: cmd 60/08:40:18:7e:52/00:00:00:00:00/40 tag 8 ncq 4096 in
[   60.856573]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.871139] ata5.00: status: { DRDY }
[   60.874801] ata5.00: failed command: READ FPDMA QUEUED
[   60.879977] ata5.00: cmd 60/08:48:20:7e:52/00:00:00:00:00/40 tag 9 ncq 4096 in
[   60.879977]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.894544] ata5.00: status: { DRDY }
[   60.898208] ata5.00: failed command: READ FPDMA QUEUED
[   60.903383] ata5.00: cmd 60/08:50:28:7e:52/00:00:00:00:00/40 tag 10 ncq 4096 in
[   60.903383]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.918037] ata5.00: status: { DRDY }
[   60.921716] ata5.00: failed command: READ FPDMA QUEUED
[   60.926877] ata5.00: cmd 60/08:58:30:7e:52/00:00:00:00:00/40 tag 11 ncq 4096 in
[   60.926877]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.941529] ata5.00: status: { DRDY }
[   60.945191] ata5.00: failed command: READ FPDMA QUEUED
[   60.950367] ata5.00: cmd 60/08:60:38:7e:52/00:00:00:00:00/40 tag 12 ncq 4096 in
[   60.950367]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.965020] ata5.00: status: { DRDY }
[   60.968684] ata5.00: failed command: READ FPDMA QUEUED
[   60.973859] ata5.00: cmd 60/08:68:40:7e:52/00:00:00:00:00/40 tag 13 ncq 4096 in
[   60.973859]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   60.988513] ata5.00: status: { DRDY }
[   60.992191] ata5.00: failed command: READ FPDMA QUEUED
[   60.997354] ata5.00: cmd 60/08:70:48:7e:52/00:00:00:00:00/40 tag 14 ncq 4096 in
[   60.997354]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   61.012006] ata5.00: status: { DRDY }
[   61.015668] ata5.00: failed command: READ FPDMA QUEUED
[   61.020844] ata5.00: cmd 60/08:78:50:7e:52/00:00:00:00:00/40 tag 15 ncq 4096 in
[   61.020844]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   61.035498] ata5.00: status: { DRDY }
[   61.039172] ata5.00: failed command: READ FPDMA QUEUED
[   61.044329] ata5.00: cmd 60/08:80:58:7e:52/00:00:00:00:00/40 tag 16 ncq 4096 in
[   61.044329]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   61.058981] ata5.00: status: { DRDY }
[   61.062658] ata5.00: failed command: READ FPDMA QUEUED
[   61.067813] ata5.00: cmd 60/08:88:60:7e:52/00:00:00:00:00/40 tag 17 ncq 4096 in
[   61.067813]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   61.082465] ata5.00: status: { DRDY }
[   61.086140] ata5: hard resetting link
[   61.599181] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   61.679253] ata5.00: configured for UDMA/133
[   61.683547] ata5.00: device reported invalid CHS sector 0
[   61.688941] ata5.00: device reported invalid CHS sector 0
[   61.694354] ata5.00: device reported invalid CHS sector 0
[   61.699755] ata5.00: device reported invalid CHS sector 0
[   61.705148] ata5.00: device reported invalid CHS sector 0
[   61.710556] ata5.00: device reported invalid CHS sector 0
[   61.715947] ata5.00: device reported invalid CHS sector 0
[   61.721356] ata5.00: device reported invalid CHS sector 0
[   61.726748] ata5.00: device reported invalid CHS sector 0
[   61.732154] ata5.00: device reported invalid CHS sector 0
[   61.737538] ata5.00: device reported invalid CHS sector 0
[   61.742947] ata5.00: device reported invalid CHS sector 0
[   61.748338] ata5.00: device reported invalid CHS sector 0
[   61.753747] ata5.00: device reported invalid CHS sector 0
[   61.759154] ata5.00: device reported invalid CHS sector 0
[   61.764538] ata5.00: device reported invalid CHS sector 0
[   61.769946] ata5.00: device reported invalid CHS sector 0
[   61.775339] ata5.00: device reported invalid CHS sector 0
[   61.780793] ata5: EH complete
[   92.676766] ata5.00: exception Emask 0x0 SAct 0x3fff SErr 0x0 action 0x6 frozen
[   92.684091] ata5.00: failed command: WRITE FPDMA QUEUED
[   92.689356] ata5.00: cmd 61/08:00:28:7d:52/00:00:00:00:00/40 tag 0 ncq 4096 out
[   92.689356]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.704010] ata5.00: status: { DRDY }
[   92.707672] ata5.00: failed command: READ FPDMA QUEUED
[   92.712847] ata5.00: cmd 60/08:08:58:7e:52/00:00:00:00:00/40 tag 1 ncq 4096 in
[   92.712847]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.727416] ata5.00: status: { DRDY }
[   92.731090] ata5.00: failed command: READ FPDMA QUEUED
[   92.736247] ata5.00: cmd 60/08:10:50:7e:52/00:00:00:00:00/40 tag 2 ncq 4096 in
[   92.736247]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.750813] ata5.00: status: { DRDY }
[   92.754474] ata5.00: failed command: READ FPDMA QUEUED
[   92.759651] ata5.00: cmd 60/08:18:48:7e:52/00:00:00:00:00/40 tag 3 ncq 4096 in
[   92.759651]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.774218] ata5.00: status: { DRDY }
[   92.777880] ata5.00: failed command: READ FPDMA QUEUED
[   92.783056] ata5.00: cmd 60/08:20:40:7e:52/00:00:00:00:00/40 tag 4 ncq 4096 in
[   92.783056]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.797633] ata5.00: status: { DRDY }
[   92.801308] ata5.00: failed command: READ FPDMA QUEUED
[   92.806463] ata5.00: cmd 60/08:28:38:7e:52/00:00:00:00:00/40 tag 5 ncq 4096 in
[   92.806463]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.821031] ata5.00: status: { DRDY }
[   92.824692] ata5.00: failed command: READ FPDMA QUEUED
[   92.829868] ata5.00: cmd 60/08:30:30:7e:52/00:00:00:00:00/40 tag 6 ncq 4096 in
[   92.829868]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.844436] ata5.00: status: { DRDY }
[   92.848098] ata5.00: failed command: READ FPDMA QUEUED
[   92.853274] ata5.00: cmd 60/08:38:28:7e:52/00:00:00:00:00/40 tag 7 ncq 4096 in
[   92.853274]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.867842] ata5.00: status: { DRDY }
[   92.871517] ata5.00: failed command: WRITE FPDMA QUEUED
[   92.876759] ata5.00: cmd 61/08:40:e8:5d:52/00:00:00:00:00/40 tag 8 ncq 4096 out
[   92.876759]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.891411] ata5.00: status: { DRDY }
[   92.895073] ata5.00: failed command: WRITE FPDMA QUEUED
[   92.900335] ata5.00: cmd 61/08:48:58:5d:52/00:00:00:00:00/40 tag 9 ncq 4096 out
[   92.900335]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.914989] ata5.00: status: { DRDY }
[   92.918652] ata5.00: failed command: WRITE FPDMA QUEUED
[   92.923913] ata5.00: cmd 61/10:50:d8:5d:56/00:00:00:00:00/40 tag 10 ncq 8192 out
[   92.923913]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.938656] ata5.00: status: { DRDY }
[   92.942332] ata5.00: failed command: WRITE FPDMA QUEUED
[   92.947581] ata5.00: cmd 61/08:58:48:5e:56/00:00:00:00:00/40 tag 11 ncq 4096 out
[   92.947581]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.962320] ata5.00: status: { DRDY }
[   92.965982] ata5.00: failed command: WRITE FPDMA QUEUED
[   92.971242] ata5.00: cmd 61/08:60:58:5e:56/00:00:00:00:00/40 tag 12 ncq 4096 out
[   92.971242]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   92.985984] ata5.00: status: { DRDY }
[   92.989660] ata5.00: failed command: WRITE FPDMA QUEUED
[   92.994902] ata5.00: cmd 61/08:68:98:ae:58/00:00:00:00:00/40 tag 13 ncq 4096 out
[   92.994902]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   93.009641] ata5.00: status: { DRDY }
[   93.013316] ata5: hard resetting link
[   93.519186] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   93.599243] ata5.00: configured for UDMA/133
[   93.603521] ata5.00: device reported invalid CHS sector 0
[   93.608910] ata5.00: device reported invalid CHS sector 0
[   93.614326] ata5.00: device reported invalid CHS sector 0
[   93.619734] ata5.00: device reported invalid CHS sector 0
[   93.625126] ata5.00: device reported invalid CHS sector 0
[   93.630535] ata5.00: device reported invalid CHS sector 0
[   93.635927] ata5.00: device reported invalid CHS sector 0
[   93.641336] ata5.00: device reported invalid CHS sector 0
[   93.646727] ata5.00: device reported invalid CHS sector 0
[   93.652134] ata5.00: device reported invalid CHS sector 0
[   93.657526] ata5.00: device reported invalid CHS sector 0
[   93.662934] ata5.00: device reported invalid CHS sector 0
[   93.668325] ata5.00: device reported invalid CHS sector 0
[   93.673733] ata5.00: device reported invalid CHS sector 0
[   93.679181] ata5: EH complete
[   93.689264] ata5.00: exception Emask 0x100 SAct 0x3fff SErr 0x400000 action 0x6 frozen
[   93.697165] ata5.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable
[   93.704655] ata5: SError: { Handshk }
[   93.708316] ata5.00: failed command: WRITE FPDMA QUEUED
[   93.713581] ata5.00: cmd 61/08:00:98:ae:58/00:00:00:00:00/40 tag 0 ncq 4096 out
[   93.713581]          res 40/00:68:28:7d:52/00:60:00:00:00/40 Emask 0x100 (unknown error)
[   93.728921] ata5.00: status: { DRDY }
[   93.732598] ata5.00: failed command: WRITE FPDMA QUEUED
[   93.737849] ata5.00: cmd 61/08:08:58:5e:56/00:00:00:00:00/40 tag 1 ncq 4096 out
[   93.737849]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   93.753105] ata5.00: status: { DRDY ERR }
[   93.757109] ata5.00: error: { ICRC ABRT }
[   93.761124] ata5.00: failed command: WRITE FPDMA QUEUED
[   93.766370] ata5.00: cmd 61/08:10:48:5e:56/00:00:00:00:00/40 tag 2 ncq 4096 out
[   93.766370]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   93.781625] ata5.00: status: { DRDY ERR }
[   93.785629] ata5.00: error: { ICRC ABRT }
[   93.789648] ata5.00: failed command: WRITE FPDMA QUEUED
[   93.794900] ata5.00: cmd 61/10:18:d8:5d:56/00:00:00:00:00/40 tag 3 ncq 8192 out
[   93.794900]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   93.810154] ata5.00: status: { DRDY ERR }
[   93.814158] ata5.00: error: { ICRC ABRT }
[   93.818162] ata5.00: failed command: WRITE FPDMA QUEUED
[   93.823426] ata5.00: cmd 61/08:20:58:5d:52/00:00:00:00:00/40 tag 4 ncq 4096 out
[   93.823426]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   93.838685] ata5.00: status: { DRDY ERR }
[   93.842701] ata5.00: error: { ICRC ABRT }
[   93.846709] ata5.00: failed command: WRITE FPDMA QUEUED
[   93.851969] ata5.00: cmd 61/08:28:e8:5d:52/00:00:00:00:00/40 tag 5 ncq 4096 out
[   93.851969]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   93.867230] ata5.00: status: { DRDY ERR }
[   93.871250] ata5.00: error: { ICRC ABRT }
[   93.875256] ata5.00: failed command: READ FPDMA QUEUED
[   93.880433] ata5.00: cmd 60/08:30:28:7e:52/00:00:00:00:00/40 tag 6 ncq 4096 in
[   93.880433]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   93.895605] ata5.00: status: { DRDY ERR }
[   93.899620] ata5.00: error: { ICRC ABRT }
[   93.903629] ata5.00: failed command: READ FPDMA QUEUED
[   93.908792] ata5.00: cmd 60/08:38:30:7e:52/00:00:00:00:00/40 tag 7 ncq 4096 in
[   93.908792]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   93.923963] ata5.00: status: { DRDY ERR }
[   93.927964] ata5.00: error: { ICRC ABRT }
[   93.931981] ata5.00: failed command: READ FPDMA QUEUED
[   93.937139] ata5.00: cmd 60/08:40:38:7e:52/00:00:00:00:00/40 tag 8 ncq 4096 in
[   93.937139]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   93.952309] ata5.00: status: { DRDY ERR }
[   93.956312] ata5.00: error: { ICRC ABRT }
[   93.960328] ata5.00: failed command: READ FPDMA QUEUED
[   93.965487] ata5.00: cmd 60/08:48:40:7e:52/00:00:00:00:00/40 tag 9 ncq 4096 in
[   93.965487]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   93.980656] ata5.00: status: { DRDY ERR }
[   93.984660] ata5.00: error: { ICRC ABRT }
[   93.988664] ata5.00: failed command: READ FPDMA QUEUED
[   93.993842] ata5.00: cmd 60/08:50:48:7e:52/00:00:00:00:00/40 tag 10 ncq 4096 in
[   93.993842]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.009099] ata5.00: status: { DRDY ERR }
[   94.013116] ata5.00: error: { ICRC ABRT }
[   94.017124] ata5.00: failed command: READ FPDMA QUEUED
[   94.022302] ata5.00: cmd 60/08:58:50:7e:52/00:00:00:00:00/40 tag 11 ncq 4096 in
[   94.022302]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.037560] ata5.00: status: { DRDY ERR }
[   94.041575] ata5.00: error: { ICRC ABRT }
[   94.045583] ata5.00: failed command: READ FPDMA QUEUED
[   94.050762] ata5.00: cmd 60/08:60:58:7e:52/00:00:00:00:00/40 tag 12 ncq 4096 in
[   94.050762]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.066019] ata5.00: status: { DRDY ERR }
[   94.070038] ata5.00: error: { ICRC ABRT }
[   94.074045] ata5.00: failed command: WRITE FPDMA QUEUED
[   94.079309] ata5.00: cmd 61/08:68:28:7d:52/00:00:00:00:00/40 tag 13 ncq 4096 out
[   94.079309]          res 41/84:68:28:7d:52/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.094652] ata5.00: status: { DRDY ERR }
[   94.098656] ata5.00: error: { ICRC ABRT }
[   94.102688] ata5: hard resetting link
[   94.609189] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   94.709242] ata5.00: configured for UDMA/133
[   94.713607] ata5: EH complete
[   94.719255] ata5: limiting SATA link speed to 1.5 Gbps
[   94.724403] ata5.00: exception Emask 0x100 SAct 0x3ffe SErr 0x400000 action 0x6 frozen
[   94.732320] ata5.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable
[   94.739798] ata5: SError: { Handshk }
[   94.743466] ata5.00: failed command: READ FPDMA QUEUED
[   94.748626] ata5.00: cmd 60/08:08:58:7e:52/00:00:00:00:00/40 tag 1 ncq 4096 in
[   94.748626]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.763796] ata5.00: status: { DRDY ERR }
[   94.767798] ata5.00: error: { ICRC ABRT }
[   94.771815] ata5.00: failed command: READ FPDMA QUEUED
[   94.776973] ata5.00: cmd 60/08:10:50:7e:52/00:00:00:00:00/40 tag 2 ncq 4096 in
[   94.776973]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.792142] ata5.00: status: { DRDY ERR }
[   94.796145] ata5.00: error: { ICRC ABRT }
[   94.800165] ata5.00: failed command: READ FPDMA QUEUED
[   94.805329] ata5.00: cmd 60/08:18:48:7e:52/00:00:00:00:00/40 tag 3 ncq 4096 in
[   94.805329]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.820499] ata5.00: status: { DRDY ERR }
[   94.824501] ata5.00: error: { ICRC ABRT }
[   94.828507] ata5.00: failed command: READ FPDMA QUEUED
[   94.833683] ata5.00: cmd 60/08:20:40:7e:52/00:00:00:00:00/40 tag 4 ncq 4096 in
[   94.833683]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.848855] ata5.00: status: { DRDY ERR }
[   94.852873] ata5.00: error: { ICRC ABRT }
[   94.856880] ata5.00: failed command: READ FPDMA QUEUED
[   94.862055] ata5.00: cmd 60/08:28:38:7e:52/00:00:00:00:00/40 tag 5 ncq 4096 in
[   94.862055]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.877229] ata5.00: status: { DRDY ERR }
[   94.881245] ata5.00: error: { ICRC ABRT }
[   94.885254] ata5.00: failed command: READ FPDMA QUEUED
[   94.890432] ata5.00: cmd 60/08:30:30:7e:52/00:00:00:00:00/40 tag 6 ncq 4096 in
[   94.890432]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.905602] ata5.00: status: { DRDY ERR }
[   94.909618] ata5.00: error: { ICRC ABRT }
[   94.913628] ata5.00: failed command: READ FPDMA QUEUED
[   94.918790] ata5.00: cmd 60/08:38:28:7e:52/00:00:00:00:00/40 tag 7 ncq 4096 in
[   94.918790]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.933961] ata5.00: status: { DRDY ERR }
[   94.937963] ata5.00: error: { ICRC ABRT }
[   94.941980] ata5.00: failed command: WRITE FPDMA QUEUED
[   94.947224] ata5.00: cmd 61/08:40:e8:5d:52/00:00:00:00:00/40 tag 8 ncq 4096 out
[   94.947224]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.962481] ata5.00: status: { DRDY ERR }
[   94.966483] ata5.00: error: { ICRC ABRT }
[   94.970499] ata5.00: failed command: WRITE FPDMA QUEUED
[   94.975745] ata5.00: cmd 61/08:48:58:5d:52/00:00:00:00:00/40 tag 9 ncq 4096 out
[   94.975745]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   94.991001] ata5.00: status: { DRDY ERR }
[   94.995004] ata5.00: error: { ICRC ABRT }
[   94.999008] ata5.00: failed command: WRITE FPDMA QUEUED
[   95.004272] ata5.00: cmd 61/10:50:d8:5d:56/00:00:00:00:00/40 tag 10 ncq 8192 out
[   95.004272]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   95.019616] ata5.00: status: { DRDY ERR }
[   95.023619] ata5.00: error: { ICRC ABRT }
[   95.027624] ata5.00: failed command: WRITE FPDMA QUEUED
[   95.032896] ata5.00: cmd 61/08:58:48:5e:56/00:00:00:00:00/40 tag 11 ncq 4096 out
[   95.032896]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   95.048241] ata5.00: status: { DRDY ERR }
[   95.052258] ata5.00: error: { ICRC ABRT }
[   95.056265] ata5.00: failed command: WRITE FPDMA QUEUED
[   95.061527] ata5.00: cmd 61/08:60:58:5e:56/00:00:00:00:00/40 tag 12 ncq 4096 out
[   95.061527]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   95.076874] ata5.00: status: { DRDY ERR }
[   95.080890] ata5.00: error: { ICRC ABRT }
[   95.084898] ata5.00: failed command: WRITE FPDMA QUEUED
[   95.090162] ata5.00: cmd 61/08:68:98:ae:58/00:00:00:00:00/40 tag 13 ncq 4096 out
[   95.090162]          res 41/84:68:98:ae:58/84:60:00:00:00/40 Emask 0x10 (ATA bus error)
[   95.105507] ata5.00: status: { DRDY ERR }
[   95.109521] ata5.00: error: { ICRC ABRT }
[   95.113544] ata5: hard resetting link
[   95.619188] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   95.719242] ata5.00: configured for UDMA/133
[   95.723607] ata5: EH complete
[   95.899410] kjournald starting.  Commit interval 5 seconds
[   95.939718] EXT3-fs (sda7): recovery complete
[   95.944074] EXT3-fs (sda7): mounted filesystem with ordered data mode
[   95.950564] VFS: Mounted root (ext3 filesystem) readonly on device 8:71.
[   95.958140] Freeing unused kernel memory: 112K (c039b000 - c03b7000)
[   96.223978] EXT3-fs (sda7): warning: checktime reached, running e2fsck is recommended
[   96.232282] EXT3-fs (sda7): using internal journal
[   96.871688] random: nonblocking pool is initialized
[   97.889395] kjournald starting.  Commit interval 5 seconds
[   97.894920] EXT3-fs (sda1): warning: checktime reached, running e2fsck is recommended
[   97.903198] EXT3-fs (sda1): using internal journal
[   97.959274] EXT3-fs (sda1): recovery complete
[   97.963631] EXT3-fs (sda1): mounted filesystem with ordered data mode
[  100.829405] kjournald starting.  Commit interval 5 seconds
[  100.834946] EXT3-fs (sda5): warning: checktime reached, running e2fsck is recommended
[  100.843269] EXT3-fs (sda5): using internal journal
[  100.899289] EXT3-fs (sda5): recovery complete
[  100.903641] EXT3-fs (sda5): mounted filesystem with ordered data mode
[  101.261084] Adding 514076k swap on /dev/sda3.  Priority:-1 extents:1 across:514076k
[  103.301178] NTFS driver 2.1.30 [Flags: R/W MODULE].
[  103.337687] fuse init (API version 7.22)
[  103.369937] usbcore: registered new interface driver usblp
[  103.417107] RPC: Registered named UNIX socket transport module.
[  103.423056] RPC: Registered udp transport module.
[  103.427744] RPC: Registered tcp transport module.
[  103.432450] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  103.512234] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  103.608545] Loading iSCSI transport class v2.0-870.
[  103.624948] iscsi: registered transport (tcp)
[  103.663359] Linux video capture interface: v2.00
[  103.771545] uvcvideo: Unable to create debugfs directory
[  103.777022] usbcore: registered new interface driver uvcvideo
[  103.782790] USB Video Class driver (1.1.1)
[  103.843573] md: raid0 personality registered for level 0
[  103.878126] md: raid1 personality registered for level 1
[  104.080885] raid6: int32x1     24 MB/s
[  104.250808] raid6: int32x2     37 MB/s
[  104.419951] raid6: int32x4     46 MB/s
[  104.589703] raid6: int32x8     57 MB/s
[  104.593444] raid6: using algorithm int32x8 (57 MB/s)
[  104.598394] raid6: using intx1 recovery algorithm
[  104.607961] async_tx: api initialized (async)
[  104.614587] xor: measuring software checksum speed
[  104.719151]    arm4regs  :   429.600 MB/sec
[  104.819144]    8regs     :   337.600 MB/sec
[  104.919146]    32regs    :   497.600 MB/sec
[  104.923322] xor: using function: 32regs (497.600 MB/sec)
[  104.945996] md: raid6 personality registered for level 6
[  104.951328] md: raid5 personality registered for level 5
[  104.956627] md: raid4 personality registered for level 4
[  104.992310] md: raid10 personality registered for level 10
[  117.621148] md: bind<sdc8>
[  117.624516] md: bind<sdd8>
[  117.627868] md: bind<sde8>
[  117.631251] md: bind<sdb8>
[  117.634285] md: kicking non-fresh sdc8 from array!
[  117.639085] md: unbind<sdc8>
[  117.642024] md: export_rdev(sdc8)
[  117.656618] md/raid:md0: device sdb8 operational as raid disk 0
[  117.662566] md/raid:md0: device sde8 operational as raid disk 3
[  117.668472] md/raid:md0: device sdd8 operational as raid disk 2
[  117.676856] md/raid:md0: allocated 0kB
[  117.680766] md/raid:md0: raid level 5 active with 3 out of 4 devices, algorithm 2
[  117.688226] RAID conf printout:
[  117.688244]  --- level:5 rd:4 wd:3
[  117.688265]  disk 0, o:1, dev:sdb8
[  117.688284]  disk 2, o:1, dev:sdd8
[  117.688304]  disk 3, o:1, dev:sde8
[  117.688609] md0: detected capacity change from 0 to 2990514044928
[  117.696426]  md0: unknown partition table
[  127.906390] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x1000000 action 0x6 frozen
[  127.914065] ata2.00: edma_err_cause=00000020 pp_flags=00000003, SError=01000000
[  127.921374] ata2: SError: { TrStaTrns }
[  127.925213] ata2.00: failed command: READ FPDMA QUEUED
[  127.930390] ata2.00: cmd 60/80:00:98:03:64/00:00:00:00:00/40 tag 0 ncq 65536 in
[  127.930390]          res 40/00:00:98:03:64/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  127.945646] ata2.00: status: { DRDY }
[  127.949338] ata2: hard resetting link
[  128.459210] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  128.559251] ata2.00: configured for UDMA/133
[  128.563559] ata2: EH complete
[  158.066750] ata4.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[  158.073821] ata4.00: failed command: READ FPDMA QUEUED
[  158.078980] ata4.00: cmd 60/00:00:98:03:64/01:00:00:00:00/40 tag 0 ncq 131072 in
[  158.078980]          res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[  158.093718] ata4.00: status: { DRDY }
[  158.097378] ata4.00: failed command: READ FPDMA QUEUED
[  158.102553] ata4.00: cmd 60/00:08:98:03:64/01:00:00:00:00/40 tag 1 ncq 131072 in
[  158.102553]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  158.117294] ata4.00: status: { DRDY }
[  158.120985] ata4: hard resetting link
[  158.629199] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  158.709256] ata4.00: configured for UDMA/133
[  158.713572] ata4.00: device reported invalid CHS sector 0
[  158.718984] ata4: EH complete
[  189.076753] ata4.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[  189.083811] ata4.00: failed command: READ FPDMA QUEUED
[  189.088977] ata4.00: cmd 60/00:08:98:03:64/01:00:00:00:00/40 tag 1 ncq 131072 in
[  189.088977]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  189.103714] ata4.00: status: { DRDY }
[  189.107390] ata4: hard resetting link
[  189.619206] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  189.699262] ata4.00: configured for UDMA/133
[  189.703554] ata4.00: device reported invalid CHS sector 0
[  189.708959] ata4: EH complete
[  190.339410] kjournald starting.  Commit interval 5 seconds
[  190.348740] EXT3-fs (sda8): warning: checktime reached, running e2fsck is recommended
[  190.359602] EXT3-fs (sda8): using internal journal
[  190.419297] EXT3-fs (sda8): recovery complete
[  190.423649] EXT3-fs (sda8): mounted filesystem with ordered data mode
[  221.106758] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[  221.113819] ata2.00: failed command: READ FPDMA QUEUED
[  221.118979] ata2.00: cmd 60/08:00:30:05:64/00:00:00:00:00/40 tag 0 ncq 4096 in
[  221.118979]          res 40/00:00:98:03:64/00:00:00:00:00/40 Emask 0x4 (timeout)
[  221.133550] ata2.00: status: { DRDY }
[  221.137228] ata2: hard resetting link
[  221.649213] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  221.729269] ata2.00: configured for UDMA/133
[  221.733567] ata2: EH complete
[  252.156769] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[  252.163835] ata4.00: failed command: READ FPDMA QUEUED
[  252.168996] ata4.00: cmd 60/08:00:60:05:64/00:00:00:00:00/40 tag 0 ncq 4096 in
[  252.168996]          res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[  252.183560] ata4.00: status: { DRDY }
[  252.187236] ata4: hard resetting link
[  252.699217] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  252.779274] ata4.00: configured for UDMA/133
[  252.783573] ata4: EH complete
[  283.126775] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[  283.133838] ata2.00: failed command: READ FPDMA QUEUED
[  283.138998] ata2.00: cmd 60/08:00:70:05:64/00:00:00:00:00/40 tag 0 ncq 4096 in
[  283.138998]          res 40/00:00:98:03:64/00:00:00:00:00/40 Emask 0x4 (timeout)
[  283.153561] ata2.00: status: { DRDY }
[  283.157239] ata2: hard resetting link
[  283.669225] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  283.929281] ata2.00: configured for UDMA/133
[  283.933583] ata2: EH complete
[  315.126785] ata4.00: NCQ disabled due to excessive errors
[  315.132208] ata4.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6 frozen
[  315.139270] ata4.00: failed command: READ FPDMA QUEUED
[  315.144433] ata4.00: cmd 60/08:00:00:09:68/00:00:3a:00:00/40 tag 0 ncq 4096 in
[  315.144433]          res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[  315.158998] ata4.00: status: { DRDY }
[  315.162674] ata4.00: failed command: READ FPDMA QUEUED
[  315.167837] ata4.00: cmd 60/08:08:f8:08:68/00:00:3a:00:00/40 tag 1 ncq 4096 in
[  315.167837]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  315.182403] ata4.00: status: { DRDY }
[  315.186065] ata4.00: failed command: READ FPDMA QUEUED
[  315.191237] ata4.00: cmd 60/08:10:10:09:68/00:00:3a:00:00/40 tag 2 ncq 4096 in
[  315.191237]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  315.205800] ata4.00: status: { DRDY }
[  315.209475] ata4.00: failed command: READ FPDMA QUEUED
[  315.214631] ata4.00: cmd 60/80:18:18:09:68/00:00:3a:00:00/40 tag 3 ncq 65536 in
[  315.214631]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  315.229285] ata4.00: status: { DRDY }
[  315.232960] ata4: hard resetting link
[  315.739231] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  315.999286] ata4.00: configured for UDMA/133
[  316.003570] ata4.00: device reported invalid CHS sector 0
[  316.008955] ata4.00: device reported invalid CHS sector 0
[  316.014378] ata4.00: device reported invalid CHS sector 0
[  316.019800] ata4: EH complete
[  316.589505] kjournald starting.  Commit interval 5 seconds
[  316.614933] EXT3-fs (md0): using internal journal
[  316.689372] EXT3-fs (md0): recovery complete
[  316.693638] EXT3-fs (md0): mounted filesystem with ordered data mode
[  316.986878] udevd (1038): /proc/1038/oom_adj is deprecated, please use /proc/1038/oom_score_adj instead.
[  316.996712] udev: starting version 130
[  320.679966] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[  323.905040] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[  327.473156] ata2: limiting SATA link speed to 1.5 Gbps
[  327.478304] ata2.00: exception Emask 0x100 SAct 0x1 SErr 0x400000 action 0x6 frozen
[  327.485964] ata2.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable
[  327.493527] ata2: SError: { Handshk }
[  327.497232] ata2.00: failed command: WRITE FPDMA QUEUED
[  327.502507] ata2.00: cmd 61/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 out
[  327.502507]          res 41/84:00:18:1a:70/84:ff:74:00:00/40 Emask 0x10 (ATA bus error)
[  327.517767] ata2.00: status: { DRDY ERR }
[  327.521783] ata2.00: error: { ICRC ABRT }
[  327.525808] ata2: hard resetting link
[  328.079278] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  328.179309] ata2.00: configured for UDMA/133
[  328.183615] ata2: EH complete
[  328.520368] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6 frozen
[  328.527838] ata4.00: edma_err_cause=04000000 pp_flags=00000001
[  328.533696] ata4: SError: { Handshk }
[  328.537365] ata4.00: failed command: WRITE DMA EXT
[  328.542195] ata4.00: cmd 35/00:08:18:1a:70/00:00:74:00:00/e0 tag 0 dma 4096 out
[  328.542195]          res 51/84:00:1f:1a:70/84:00:74:00:00/e0 Emask 0x10 (ATA bus error)
[  328.557453] ata4.00: status: { DRDY ERR }
[  328.561468] ata4.00: error: { ICRC ABRT }
[  328.565493] ata4: hard resetting link
[  329.079242] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  329.159290] ata4.00: configured for UDMA/133
[  329.163596] ata4: EH complete
[  366.486820] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  366.493881] ata4.00: failed command: READ DMA
[  366.498261] ata4.00: cmd c8/00:00:98:05:64/00:00:00:00:00/e0 tag 0 dma 131072 in
[  366.498261]          res 40/00:00:1f:1a:70/84:00:74:00:00/e0 Emask 0x4 (timeout)
[  366.513005] ata4.00: status: { DRDY }
[  366.516684] ata4: hard resetting link
[  366.538417] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[  366.545475] ata1.00: failed command: READ FPDMA QUEUED
[  366.550648] ata1.00: cmd 60/00:00:98:05:64/01:00:00:00:00/40 tag 0 ncq 131072 in
[  366.550648]          res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[  366.565390] ata1.00: status: { DRDY }
[  366.569066] ata1: hard resetting link
[  367.069280] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  367.089287] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  367.130060] ata4.00: configured for UDMA/133
[  367.134373] ata4: EH complete
[  367.138799] ata1.00: configured for UDMA/133
[  367.143114] ata1.00: device reported invalid CHS sector 0
[  367.148522] ata1: EH complete
root@fvdwsl-base:/ #


Code: Select all

root@fvdwsl-base:/ # mdadm --detail /dev/md0
/dev/md0:
        Version : 00.90.03
  Creation Time : Wed Nov 16 13:22:21 2011
     Raid Level : raid5
     Array Size : 2920423872 (2785.13 GiB 2990.51 GB)
    Device Size : 973474624 (928.38 GiB 996.84 GB)
   Raid Devices : 4
  Total Devices : 3
Preferred Minor : 0
    Persistence : Superblock is persistent

    Update Time : Wed Sep 23 16:48:52 2015
          State : clean, degraded
 Active Devices : 3
Working Devices : 3
 Failed Devices : 0
  Spare Devices : 0

         Layout : left-symmetric
     Chunk Size : 64K

           UUID : fa58a2b1:a56fc1c1:2a5b9325:5626151a
         Events : 0.95

    Number   Major   Minor   RaidDevice State
       0       8       56        0      active sync   /dev/sdb8
       1       0        0        1      removed
       2       8       24        2      active sync   /dev/sdd8
       3       8        8        3      active sync   /dev/sde8
root@fvdwsl-base:/ #


Code: Select all

root@fvdwsl-base:/ # cat /proc/mdstat
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sdb8[0] sde8[3] sdd8[2]
      2920423872 blocks level 5, 64k chunk, algorithm 2 [4/3] [U_UU]

unused devices: <none>
root@fvdwsl-base:/ #


[Jocko]

According with some Internet seach, the sata errors in dmsg may be caused by your power supply (voltages weren't the right ones). Do you still use the Lacie one?
To check it stop the nas and unplug sd[bcde], restart the nas and post the dmesg.

Other point, since several post, I noticed a bad raid status about sdc8 (removed).
which commands do you use to create the raid and/or do remove manually sdc8 ?

[b1gnas]

yes i use the original power supply

Code: Select all

root@fvdwsl-base:/ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #1 Thu Jan 8 23:24:14 CET 2015
[    0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: LaCie 5Big1 Network
[    0.000000] Clearing invalid memory bank 0KB@0x00000000
[    0.000000] Clearing invalid memory bank 0KB@0x00000000
[    0.000000] Clearing invalid memory bank 0KB@0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c03de85c, node_mem_map c7efb000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro boardType=mv88F5281 productType=5Big reset=0
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 125736K/131072K available (2809K kernel code, 158K rwdata, 848K rodata, 114K init, 206K bss, 5336K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc039a7f0   (3658 kB)
[    0.000000]       .init : 0xc039b000 - 0xc03b78c8   ( 115 kB)
[    0.000000]       .data : 0xc03b8000 - 0xc03df9e0   ( 159 kB)
[    0.000000]        .bss : 0xc03df9e0 - 0xc04135c0   ( 207 kB)
[    0.000000] NR_IRQS:64
[    0.000015] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[    1.468821] Console: colour dummy device 80x30
[    1.468859] Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
[    1.528515] pid_max: default: 32768 minimum: 301
[    1.528721] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    1.528748] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    1.529590] CPU: Testing write buffer coherency: ok
[    1.530108] Setting up static identity map for 0x2a8b20 - 0x2a8b5c
[    1.533582] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
[    1.534541] NET: Registered protocol family 16
[    1.535416] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    1.538604] 5big1 init started
[    1.538633] Orion ID: MV88F5281-D0. TCLK=166666667.
[    1.538693] Orion: Applying 5281 D0 WFI workaround.
[    1.539042] 5big1 init 1
[    1.539063] initial MPP regs: 00000003 00000000 00170000
[    1.539102]   final MPP regs: 00000003 00000000 00170000
[    1.539131] 5big1 init 2
[    1.539148] net5big: powering up SATA drives
[    1.539168] 5big1 init 3
[    1.539181] 5big1 init 4
[    1.539534] 5big1 init 5
[    1.540478] 5big1 init 6
[    1.540803] 5big1 init 7
[    1.541133] 5big1 init 8
[    1.541469] 5big1 init 9
[    1.541797] 5big1 init 10
[    1.542439] 5big1 init 11
[    1.542767] 5big1 init 12
[    1.542790] net5big: turning off power-off control GPIO
[    1.542812] net5big: Flash writing is not yet supported.
[    1.542826] 5big1 init end
[    1.543767] orion_gpio_is_valid: invalid GPIO 20
[    1.543790] orion_gpio_is_valid: invalid GPIO 20
[    1.543806] net5big_pci_preinit failed to gpio_request 20
[    1.544356] PCI host bridge to bus 0000:00
[    1.544400] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[    1.544429] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[    1.544458] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.544519] pci 0000:00:00.0: [11ab:5281] type 00 class 0x058000
[    1.544568] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
[    1.544601] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x07ffffff]
[    1.545170] PCI: bus0: Fast back to back transfers disabled
[    1.545210] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.545764] PCI host bridge to bus 0000:01
[    1.545807] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff]
[    1.545837] pci_bus 0000:01: root bus resource [io  0x10000-0x1ffff]
[    1.545865] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[    1.545937] pci 0000:01:00.0: [11ab:5281] type 00 class 0x058000
[    1.545993] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x07ffffff 64bit pref]
[    1.546032] pci 0000:01:00.0: reg 0x18: [mem 0x10000000-0x1fffffff 64bit pref]
[    1.546069] pci 0000:01:00.0: reg 0x20: [mem 0xf1000000-0xf10fffff 64bit]
[    1.546104] pci 0000:01:00.0: reg 0x30: [mem 0xe0000000-0xe7ffffff pref]
[    1.546167] pci 0000:01:00.0: supports D1 D2
[    1.546193] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[    1.546758] pci 0000:01:07.0: [11ab:6081] type 00 class 0x010000
[    1.546823] pci 0000:01:07.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit]
[    1.546859] pci 0000:01:07.0: reg 0x18: [io  0xf0100000-0xf01000ff]
[    1.547464] PCI: bus1: Fast back to back transfers enabled
[    1.547503] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.547582] pci 0000:01:07.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit]
[    1.547625] pci 0000:01:07.0: BAR 2: assigned [io  0x10000-0x100ff]
[    1.577234] bio: create slab <bio-0> at 0
[    1.578655] vgaarb: loaded
[    1.579964] SCSI subsystem initialized
[    1.580910] libata version 3.00 loaded.
[    1.582742] usbcore: registered new interface driver usbfs
[    1.583119] usbcore: registered new interface driver hub
[    1.583544] usbcore: registered new device driver usb
[    1.586633] Switched to clocksource orion_clocksource
[    1.614617] NET: Registered protocol family 2
[    1.615483] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    1.615540] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    1.615589] TCP: Hash tables configured (established 1024 bind 1024)
[    1.615696] TCP: reno registered
[    1.615723] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.615777] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.616081] NET: Registered protocol family 1
[    1.616171] PCI: CLS 32 bytes, default 32
[    1.618909] futex hash table entries: 256 (order: -1, 3072 bytes)
[    1.619836] VFS: Disk quotas dquot_6.5.2
[    1.619934] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.620197] msgmni has been set to 245
[    1.622889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.622917] io scheduler noop registered
[    1.622935] io scheduler deadline registered
[    1.622977] io scheduler cfq registered (default)
[    1.623460] mv_xor mv_xor.0: Marvell shared XOR driver
[    1.638543] mv_xor mv_xor.0: Self-test copy failed compare, disabling
[    1.650183] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.672122] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3, base_baud = 10416666) is a 16550A
[    2.197569] console [ttyS0] enabled
[    2.220473] brd: module loaded
[    2.232937] loop: module loaded
[    2.236688] Uniform Multi-Platform E-IDE driver
[    2.241873] ide-gd driver 1.18
[    2.246376] sata_mv 0000:01:07.0: version 1.28
[    2.247037] sata_mv 0000:01:07.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
[    2.286084] scsi0 : sata_mv
[    2.290074] scsi1 : sata_mv
[    2.293925] scsi2 : sata_mv
[    2.297794] scsi3 : sata_mv
[    2.301687] scsi4 : sata_mv
[    2.305559] scsi5 : sata_mv
[    2.309457] scsi6 : sata_mv
[    2.313331] scsi7 : sata_mv
[    2.316976] ata1: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8022000 irq 52
[    2.324652] ata2: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8024000 irq 52
[    2.332307] ata3: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8026000 irq 52
[    2.339961] ata4: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8028000 irq 52
[    2.347592] ata5: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8032000 irq 52
[    2.355245] ata6: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8034000 irq 52
[    2.362892] ata7: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8036000 irq 52
[    2.370538] ata8: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8038000 irq 52
[    2.380068] sata_mv sata_mv.0: version 1.28
[    2.380298] sata_mv sata_mv.0: cannot get optional clkdev
[    2.387896] sata_mv sata_mv.0: slots 32 ports 5
[    2.411631] scsi8 : sata_mv
[    2.415529] scsi9 : sata_mv
[    2.419448] scsi10 : sata_mv
[    2.423436] scsi11 : sata_mv
[    2.427412] scsi12 : sata_mv
[    2.431201] ata9: SATA max UDMA/133 irq 29
[    2.435296] ata10: SATA max UDMA/133 irq 29
[    2.439508] ata11: SATA max UDMA/133 irq 29
[    2.443684] ata12: SATA max UDMA/133 irq 29
[    2.447857] ata13: SATA max UDMA/133 irq 29
[    2.453475] tun: Universal TUN/TAP device driver, 1.6
[    2.458547] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.465114] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    2.474081] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    2.490694] libphy: orion_mdio_bus: probed
[    2.495160] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    2.581028] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:86:ea:3a
[    2.592074] aoe: cannot create debugfs directory
[    2.596918] aoe: AoE v85 initialised.
[    2.601650] i2c /dev entries driver
[    2.609774] rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6
[    2.623086] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
[    2.631456] at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
[    2.656284] Netfilter messages via NETLINK v0.30.
[    2.661401] ipip: IPv4 over IPv4 tunneling driver
[    2.667606] TCP: cubic registered
[    2.670966] NET: Registered protocol family 17
[    2.675428] NET: Registered protocol family 5
[    2.681764] console [netcon0] enabled
[    2.685425] netconsole: network logging started
[    2.691554] rtc-rs5c372 0-0032: setting system clock to 2015-09-23 15:22:56 UTC (1443021776)
[    2.718563] ata1: SATA link down (SStatus 0 SControl 300)
[    3.068555] ata2: SATA link down (SStatus 0 SControl 300)
[    3.418554] ata3: SATA link down (SStatus 0 SControl 300)
[    3.518529] ata9: failed to resume link (SControl 0)
[    3.523500] ata9: SATA link down (SStatus 0 SControl 0)
[    3.768552] ata4: SATA link down (SStatus 0 SControl 300)
[    4.278561] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.318602] ata5.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[    4.324773] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.388613] ata5.00: configured for UDMA/133
[    4.393394] scsi 4:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[    4.402485] fvdw1 disk index before get_sd_name = 0
[    4.407354] device-name= sata_mv
[    4.410606] fvdw2 disk index after get_sd_name = 0
[    4.415379] fvdw3 prefix[0]=s  prefix[1]=d
[    4.419482] fvdw4 diskname = sda
[    4.423694] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    4.431373] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    4.438469] sd 4:0:0:0: [sda] Write Protect is off
[    4.443298] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.443590] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.487572]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    4.498921] sd 4:0:0:0: [sda] Attached SCSI disk
[    4.778559] ata6: SATA link down (SStatus 0 SControl 300)
[    5.128555] ata7: SATA link down (SStatus 0 SControl 300)
[    5.478553] ata8: SATA link down (SStatus 0 SControl 300)
[    6.548529] ata10: failed to resume link (SControl 0)
[    6.553590] ata10: SATA link down (SStatus 0 SControl 0)
[    7.628532] ata11: failed to resume link (SControl 0)
[    7.633590] ata11: SATA link down (SStatus 0 SControl 0)
[    8.708533] ata12: failed to resume link (SControl 0)
[    8.713592] ata12: SATA link down (SStatus 0 SControl 0)
[    9.788529] ata13: failed to resume link (SControl 0)
[    9.793580] ata13: SATA link down (SStatus 0 SControl 0)
[    9.820787] kjournald starting.  Commit interval 5 seconds
[    9.826307] EXT3-fs (sda7): mounted filesystem with ordered data mode
[    9.832795] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
[    9.840298] Freeing unused kernel memory: 112K (c039b000 - c03b7000)
[   40.626116] ata5.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[   40.633176] ata5.00: failed command: READ FPDMA QUEUED
[   40.638334] ata5.00: cmd 60/40:00:a0:af:53/00:00:00:00:00/40 tag 0 ncq 32768 in
[   40.638334]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   40.652985] ata5.00: status: { DRDY }
[   40.656646] ata5.00: failed command: READ FPDMA QUEUED
[   40.661820] ata5.00: cmd 60/18:08:e8:af:53/00:00:00:00:00/40 tag 1 ncq 12288 in
[   40.661820]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   40.676476] ata5.00: status: { DRDY }
[   40.680166] ata5: hard resetting link
[   41.188566] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   41.288623] ata5.00: configured for UDMA/133
[   41.292908] ata5.00: device reported invalid CHS sector 0
[   41.298297] ata5.00: device reported invalid CHS sector 0
[   41.303729] ata5: EH complete
[   71.636137] ata5.00: exception Emask 0x0 SAct 0x3f SErr 0x0 action 0x6 frozen
[   71.643286] ata5.00: failed command: READ FPDMA QUEUED
[   71.648443] ata5.00: cmd 60/40:00:c8:1e:5a/00:00:00:00:00/40 tag 0 ncq 32768 in
[   71.648443]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   71.663093] ata5.00: status: { DRDY }
[   71.666755] ata5.00: failed command: READ FPDMA QUEUED
[   71.671931] ata5.00: cmd 60/c0:08:10:1f:5a/00:00:00:00:00/40 tag 1 ncq 98304 in
[   71.671931]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   71.686584] ata5.00: status: { DRDY }
[   71.690259] ata5.00: failed command: READ FPDMA QUEUED
[   71.695416] ata5.00: cmd 60/00:10:a0:96:53/01:00:00:00:00/40 tag 2 ncq 131072 in
[   71.695416]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   71.710155] ata5.00: status: { DRDY }
[   71.713816] ata5.00: failed command: READ FPDMA QUEUED
[   71.718992] ata5.00: cmd 60/40:18:30:a5:53/00:00:00:00:00/40 tag 3 ncq 32768 in
[   71.718992]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   71.733646] ata5.00: status: { DRDY }
[   71.737310] ata5.00: failed command: READ FPDMA QUEUED
[   71.742485] ata5.00: cmd 60/c0:20:78:a5:53/00:00:00:00:00/40 tag 4 ncq 98304 in
[   71.742485]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   71.757143] ata5.00: status: { DRDY }
[   71.760813] ata5.00: failed command: READ FPDMA QUEUED
[   71.765971] ata5.00: cmd 60/00:28:a8:9b:53/01:00:00:00:00/40 tag 5 ncq 131072 in
[   71.765971]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   71.780709] ata5.00: status: { DRDY }
[   71.784387] ata5: hard resetting link
[   72.288572] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   72.368628] ata5.00: configured for UDMA/133
[   72.372916] ata5.00: device reported invalid CHS sector 0
[   72.378307] ata5.00: device reported invalid CHS sector 0
[   72.383722] ata5.00: device reported invalid CHS sector 0
[   72.389127] ata5.00: device reported invalid CHS sector 0
[   72.394522] ata5.00: device reported invalid CHS sector 0
[   72.399939] ata5.00: device reported invalid CHS sector 0
[   72.405355] ata5: EH complete
[  102.706131] ata5.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[  102.713192] ata5.00: failed command: READ FPDMA QUEUED
[  102.718350] ata5.00: cmd 60/00:00:f8:21:5a/01:00:00:00:00/40 tag 0 ncq 131072 in
[  102.718350]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  102.733087] ata5.00: status: { DRDY }
[  102.736748] ata5.00: failed command: READ FPDMA QUEUED
[  102.741922] ata5.00: cmd 60/80:08:f8:22:5a/00:00:00:00:00/40 tag 1 ncq 65536 in
[  102.741922]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  102.756577] ata5.00: status: { DRDY }
[  102.760267] ata5: hard resetting link
[  103.268579] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  103.348634] ata5.00: configured for UDMA/133
[  103.352916] ata5.00: device reported invalid CHS sector 0
[  103.358304] ata5.00: device reported invalid CHS sector 0
[  103.363734] ata5: EH complete
[  103.474225] EXT3-fs (sda7): warning: checktime reached, running e2fsck is recommended
[  103.482547] EXT3-fs (sda7): using internal journal
[  139.636117] ata5.00: NCQ disabled due to excessive errors
[  139.641537] ata5.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[  139.648593] ata5.00: failed command: READ FPDMA QUEUED
[  139.653753] ata5.00: cmd 60/08:00:80:f7:01/00:00:00:00:00/40 tag 0 ncq 4096 in
[  139.653753]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  139.668318] ata5.00: status: { DRDY }
[  139.671994] ata5.00: failed command: WRITE FPDMA QUEUED
[  139.677243] ata5.00: cmd 61/08:08:58:7d:52/00:00:00:00:00/40 tag 1 ncq 4096 out
[  139.677243]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  139.691895] ata5.00: status: { DRDY }
[  139.695574] ata5: hard resetting link
[  140.208586] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  140.288642] ata5.00: configured for UDMA/133
[  140.292920] ata5.00: device reported invalid CHS sector 0
[  140.298310] ata5.00: device reported invalid CHS sector 0
[  140.303741] ata5: EH complete
[  170.726139] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  170.733198] ata5.00: failed command: READ DMA
[  170.737579] ata5.00: cmd c8/00:08:c0:f7:01/00:00:00:00:00/e0 tag 0 dma 4096 in
[  170.737579]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  170.752143] ata5.00: status: { DRDY }
[  170.755821] ata5: hard resetting link
[  171.268592] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  171.388647] ata5.00: configured for UDMA/133
[  171.392927] ata5.00: device reported invalid CHS sector 0
[  171.398334] ata5: EH complete
[  201.696147] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  201.703208] ata5.00: failed command: READ DMA
[  201.707589] ata5.00: cmd c8/00:08:00:f8:01/00:00:00:00:00/e0 tag 0 dma 4096 in
[  201.707589]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  201.722161] ata5.00: status: { DRDY }
[  201.725840] ata5: hard resetting link
[  202.238598] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  202.318656] ata5.00: configured for UDMA/133
[  202.322937] ata5.00: device reported invalid CHS sector 0
[  202.328342] ata5: EH complete
[  226.728835] random: nonblocking pool is initialized
[  232.746152] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  232.753210] ata5.00: failed command: READ DMA
[  232.757589] ata5.00: cmd c8/00:08:78:f9:01/00:00:00:00:00/e0 tag 0 dma 4096 in
[  232.757589]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  232.772155] ata5.00: status: { DRDY }
[  232.775832] ata5: hard resetting link
[  233.288604] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  233.408661] ata5.00: configured for UDMA/133
[  233.412938] ata5.00: device reported invalid CHS sector 0
[  233.418345] ata5: EH complete
[  263.716153] ata5: limiting SATA link speed to 1.5 Gbps
[  263.721311] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  263.728350] ata5.00: failed command: READ DMA
[  263.732749] ata5.00: cmd c8/00:08:e8:18:02/00:00:00:00:00/e0 tag 0 dma 4096 in
[  263.732749]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  263.747314] ata5.00: status: { DRDY }
[  263.751004] ata5: hard resetting link
[  264.258611] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  264.338668] ata5.00: configured for UDMA/133
[  264.342945] ata5.00: device reported invalid CHS sector 0
[  264.348355] ata5: EH complete
[  265.708949] kjournald starting.  Commit interval 5 seconds
[  265.714660] EXT3-fs (sda1): warning: checktime reached, running e2fsck is recommended
[  265.723248] EXT3-fs (sda1): using internal journal
[  265.818702] EXT3-fs (sda1): recovery complete
[  265.823059] EXT3-fs (sda1): mounted filesystem with ordered data mode
[  267.748824] kjournald starting.  Commit interval 5 seconds
[  267.754356] EXT3-fs (sda5): warning: checktime reached, running e2fsck is recommended
[  267.762651] EXT3-fs (sda5): using internal journal
[  267.838703] EXT3-fs (sda5): recovery complete
[  267.843056] EXT3-fs (sda5): mounted filesystem with ordered data mode
[  268.010473] Adding 514076k swap on /dev/sda3.  Priority:-1 extents:1 across:514076k
[  269.857386] NTFS driver 2.1.30 [Flags: R/W MODULE].
[  269.893511] fuse init (API version 7.22)
[  269.925833] usbcore: registered new interface driver usblp
[  269.973523] RPC: Registered named UNIX socket transport module.
[  269.979468] RPC: Registered udp transport module.
[  269.984157] RPC: Registered tcp transport module.
[  269.988864] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  270.068130] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  270.142257] Loading iSCSI transport class v2.0-870.
[  270.158517] iscsi: registered transport (tcp)
[  270.197227] Linux video capture interface: v2.00
[  270.306050] uvcvideo: Unable to create debugfs directory
[  270.311553] usbcore: registered new interface driver uvcvideo
[  270.317279] USB Video Class driver (1.1.1)
[  270.359232] md: raid0 personality registered for level 0
[  270.393566] md: raid1 personality registered for level 1
[  270.600921] raid6: int32x1     24 MB/s
[  270.769543] raid6: int32x2     37 MB/s
[  270.939470] raid6: int32x4     46 MB/s
[  271.109542] raid6: int32x8     57 MB/s
[  271.113285] raid6: using algorithm int32x8 (57 MB/s)
[  271.118234] raid6: using intx1 recovery algorithm
[  271.128076] async_tx: api initialized (async)
[  271.134704] xor: measuring software checksum speed
[  271.238574]    arm4regs  :   429.600 MB/sec
[  271.338572]    8regs     :   337.600 MB/sec
[  271.438570]    32regs    :   497.600 MB/sec
[  271.442747] xor: using function: 32regs (497.600 MB/sec)
[  271.465392] md: raid6 personality registered for level 6
[  271.470735] md: raid5 personality registered for level 5
[  271.476036] md: raid4 personality registered for level 4
[  271.511809] md: raid10 personality registered for level 10
[  286.218832] kjournald starting.  Commit interval 5 seconds
[  286.227955] EXT3-fs (sda8): warning: checktime reached, running e2fsck is recommended
[  286.238771] EXT3-fs (sda8): using internal journal
[  286.298704] EXT3-fs (sda8): recovery complete
[  286.303057] EXT3-fs (sda8): mounted filesystem with ordered data mode
[  286.370824] udevd (882): /proc/882/oom_adj is deprecated, please use /proc/882/oom_score_adj instead.
[  286.380127] udev: starting version 130
[  289.909316] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[  292.997303] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
root@fvdwsl-base:/ #



the command used for the raid is this

Code: Select all

mdadm --create --verbose /dev/md0 --level=5 --assume-clean --raid-devices=4 /dev/sdb8 /dev/sdc8 /dev/sdd8 /dev/sde8

but before this for all disks

Code: Select all

dd if=/dev/zero bs=512 count=512 of=/dev/sdb8

[Jocko]

About the errors message I need a talking with fvdw.

:shocked :shocked :shocked
why did you made this

but before this for all disks

Code: Select all

dd if=/dev/zero bs=512 count=512 of=/dev/sdb8

Post

Code: Select all

mdadm --examine /dev/sd[bcde]8

[b1gnas]

:shocked :shocked :shocked
why did you made this

but before this for all disks

Code: Select all

dd if=/dev/zero bs=512 count=512 of=/dev/sdb8

it's in the raid1 tutorial.... after many many tries, i tried every command :sob

Now i have to go...se you Tomorrow

[Jocko]

With this command you just destroy the fs on these partition but not the raid superblock.

I expect a raid superblock conflict with sdc8

[Jocko]

Hi b1gnas,

I read in detail your last dmesg output and it seems that rewriting the firmware on sda7 was not useless.
Indeed since rewriting firmware image, in your two dmesg output, I can read

Code: Select all

    [   21.640384] rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6
    [   21.653694] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0

    [   21.722192] rtc-rs5c372 0-0032: setting system clock to 2015-09-23 14:43:45 UTC (1443019425)

So the 'hwclock' error message should be fixed now.

[b1gnas]

Hi Jocko,

yes the 'hwclock' error is fixed...

and now what should i do, is it better to reinstall all from zero or the raid issue is fixable?