plugout.net

by **b1gnas** » Wed Sep 23, 2015 7:37 am

Code: Select all: root@fvdwsl-base:/ # dd if=/dev/null of=/dev/sdb6 bs=512 count=100 0+0 records in 0+0 records out root@fvdwsl-base:/ # dd if=/dev/null of=/dev/sdc6 bs=512 count=100 0+0 records in 0+0 records out root@fvdwsl-base:/ # dd if=/dev/null of=/dev/sdd6 bs=512 count=100 0+0 records in 0+0 records out root@fvdwsl-base:/ # dd if=/dev/null of=/dev/sde6 bs=512 count=100 0+0 records in 0+0 records out root@fvdwsl-base:/ # dmesg Booting Linux on physical CPU 0x0 Linux version 3.9.5 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #25 Thu Feb 27 22:22:32 GMT+1 2014 CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: LaCie 5Big1 Network Clearing invalid memory bank 0KB@0x00000000 Clearing invalid memory bank 0KB@0x00000000 Clearing invalid memory bank 0KB@0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x41000403 Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 32768 free_area_init_node: node 0, pgdat c039aed8, node_mem_map c03cb000 Normal zone: 256 pages used for memmap Normal zone: 0 pages reserved Normal zone: 32768 pages, LIFO batch:7 pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro boardType=mv88F5281 productType=5Big reset=0 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) __ex_table already sorted, skipping sort Memory: 128MB = 128MB total Memory: 126024k/126024k available, 5048k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc0355fdc (3384 kB) .init : 0xc0356000 - 0xc0374ebc ( 124 kB) .data : 0xc0376000 - 0xc039bee0 ( 152 kB) .bss : 0xc039bee0 - 0xc03ca8dc ( 187 kB) NR_IRQS:64 sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms Console: colour dummy device 80x30 Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok Setting up static identity map for 0xc028ffc8 - 0xc0290004 NET: Registered protocol family 16 DMA: preallocated 1024 KiB pool for atomic coherent allocations Register Driver 'dummy' 5big1 init started Orion ID: MV88F5281-D0. TCLK=166666667. Orion: Applying 5281 D0 WFI workaround. 5big1 init 1 initial MPP regs: 00000003 00000000 00170000 final MPP regs: 00000003 00000000 00170000 5big1 init 2 net5big: powering up SATA drives 5big1 init 3 5big1 init 4 5big1 init 5 5big1 init 6 5big1 init 7 5big1 init 8 5big1 init 9 5big1 init 10 5big1 init 11 5big1 init 12 net5big: turning off power-off control GPIO net5big: Flash writing is not yet supported. 5big1 init end orion_gpio_is_valid: invalid GPIO 20 orion_gpio_is_valid: invalid GPIO 20 net5big_pci_preinit failed to gpio_request 20 PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] pci 0000:00:00.0: [11ab:5281] type 00 class 0x058000 pci 0000:00:00.0: reg 10: [mem 0xf1000000-0xf10fffff 64bit pref] pci 0000:00:00.0: reg 18: [mem 0x00000000-0x07ffffff] PCI: bus0: Fast back to back transfers disabled pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff] pci_bus 0000:01: root bus resource [io 0x10000-0x1ffff] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff] pci 0000:01:00.0: [11ab:5281] type 00 class 0x058000 pci 0000:01:00.0: reg 10: [mem 0x00000000-0x07ffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0x10000000-0x1fffffff 64bit pref] pci 0000:01:00.0: reg 20: [mem 0xf1000000-0xf10fffff 64bit] pci 0000:01:00.0: reg 30: [mem 0xe0000000-0xe7ffffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:07.0: [11ab:6081] type 00 class 0x010000 pci 0000:01:07.0: reg 10: [mem 0x40000000-0x400fffff 64bit] pci 0000:01:07.0: reg 18: [io 0xf0100000-0xf01000ff] PCI: bus1: Fast back to back transfers enabled pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 pci 0000:01:07.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit] pci 0000:01:07.0: BAR 2: assigned [io 0x10000-0x100ff] bio: create slab <bio-0> at 0 vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. Register Driver 'Generic PHY' Register Driver 'usbfs' usbcore: registered new interface driver usbfs Register Driver 'hub' usbcore: registered new interface driver hub Register Driver 'usb' usbcore: registered new device driver usb Register Driver 'i2c-gpio' Switching to clocksource orion_clocksource NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 PCI: CLS 32 bytes, default 32 Register Driver 'alarmtimer' VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 246 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Register Driver 'mv_xor' mv_xor mv_xor.0: Marvell shared XOR driver mv_xor mv_xor.0: Self-test copy failed compare, disabling Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Register Driver 'serial8250' serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A console [ttyS0] enabled Register Driver 'serial' brd: module loaded loop: module loaded Register Driver 'at24' Register Driver 'eeprom' Register Driver 'sd' Register Driver 'ahci' Register Driver 'sata_mv' sata_mv 0000:01:07.0: version 1.28 sata_mv 0000:01:07.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx scsi0 : sata_mv scsi1 : sata_mv scsi2 : sata_mv scsi3 : sata_mv scsi4 : sata_mv scsi5 : sata_mv scsi6 : sata_mv scsi7 : sata_mv ata1: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8022000 irq 52 ata2: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8024000 irq 52 ata3: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8026000 irq 52 ata4: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8028000 irq 52 ata5: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8032000 irq 52 ata6: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8034000 irq 52 ata7: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8036000 irq 52 ata8: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8038000 irq 52 Register Driver 'sata_mv' sata_mv sata_mv.0: version 1.28 sata_mv sata_mv.0: cannot get optional clkdev sata_mv sata_mv.0: slots 32 ports 5 scsi8 : sata_mv scsi9 : sata_mv scsi10 : sata_mv scsi11 : sata_mv scsi12 : sata_mv ata9: SATA max UDMA/133 irq 29 ata10: SATA max UDMA/133 irq 29 ata11: SATA max UDMA/133 irq 29 ata12: SATA max UDMA/133 irq 29 ata13: SATA max UDMA/133 irq 29 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> Register Driver 'mv643xx_eth' mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 libphy: mv643xx_eth smi: probed Register Driver 'mv643xx_eth_port' mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 48:00:30:00:b0:33 mousedev: PS/2 mouse device common for all mice Register Driver 'rtc-ds1307' Register Driver 'rtc-ds1374' Register Driver 'rtc-rs5c372' i2c /dev entries driver Register Driver 'mv64xxx_i2c' ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 fvdw1 disk index before get_sd_name = 0 device-name= sata_mv fvdw2 disk index after get_sd_name = 4 fvdw3 prefix[0]=s prefix[1]=d fvdw4 diskname = sde sd 0:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sde] 4096-byte physical blocks sd 0:0:0:0: [sde] Write Protect is off sd 0:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sde4 < sde5 sde6 sde7 sde8 > sd 0:0:0:0: [sde] Attached SCSI disk ata9: failed to resume link (SControl 0) ata9: SATA link down (SStatus 0 SControl 0) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 fvdw1 disk index before get_sd_name = 1 device-name= sata_mv fvdw2 disk index after get_sd_name = 3 fvdw3 prefix[0]=s prefix[1]=d fvdw4 diskname = sdd sd 1:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 1:0:0:0: [sdd] 4096-byte physical blocks sd 1:0:0:0: [sdd] Write Protect is off sd 1:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd4 < sdd5 sdd6 sdd7 sdd8 > sd 1:0:0:0: [sdd] Attached SCSI disk ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 fvdw1 disk index before get_sd_name = 2 device-name= sata_mv fvdw2 disk index after get_sd_name = 2 fvdw3 prefix[0]=s prefix[1]=d fvdw4 diskname = sdc sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 2:0:0:0: [sdc] 4096-byte physical blocks sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc4 < sdc5 sdc6 sdc7 sdc8 > sd 2:0:0:0: [sdc] Attached SCSI disk i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 rtc-rs5c372 0-0032: can't read registers rtc-rs5c372: probe of 0-0032 failed with error -5 at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 fvdw1 disk index before get_sd_name = 3 device-name= sata_mv fvdw2 disk index after get_sd_name = 1 fvdw3 prefix[0]=s prefix[1]=d fvdw4 diskname = sdb sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdb] 4096-byte physical blocks sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 > sd 3:0:0:0: [sdb] Attached SCSI disk ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata5.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 fvdw1 disk index before get_sd_name = 4 device-name= sata_mv fvdw2 disk index after get_sd_name = 0 fvdw3 prefix[0]=s prefix[1]=d fvdw4 diskname = sda sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 4:0:0:0: [sda] 4096-byte physical blocks sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > sd 4:0:0:0: [sda] Attached SCSI disk ata6: SATA link down (SStatus 0 SControl 300) ata7: SATA link down (SStatus 0 SControl 300) i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 ata8: SATA link down (SStatus 0 SControl 300) ata10: failed to resume link (SControl 0) ata10: SATA link down (SStatus 0 SControl 0) i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 ata11: failed to resume link (SControl 0) ata11: SATA link down (SStatus 0 SControl 0) ata12: failed to resume link (SControl 0) ata12: SATA link down (SStatus 0 SControl 0) i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 ata13: failed to resume link (SControl 0) ata13: SATA link down (SStatus 0 SControl 0) i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 Register Driver 'g762' g762 probe started g762 probe 1 i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 g762 probe 2 g762: probe of 0-003e failed with error -110 Register Driver 'gpio-fan' Register Driver 'lm75' i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 Register Driver 'lm77' i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 Register Driver 'leds-gpio' Register Driver 'mv_crypto' Netfilter messages via NETLINK v0.30. IPv4 over IPv4 tunneling driver TCP: cubic registered NET: Registered protocol family 17 NET: Registered protocol family 5 VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 console [netcon0] enabled netconsole: network logging started drivers/rtc/hctosys.c: unable to open rtc device (rtc0) kjournald starting. Commit interval 5 seconds EXT3-fs (sda7): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:71. Freeing init memory: 120K ata5.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/40:00:a0:af:53/00:00:00:00:00/40 tag 0 ncq 32768 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/18:08:e8:af:53/00:00:00:00:00/40 tag 1 ncq 12288 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5: hard resetting link ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: configured for UDMA/133 ata5.00: device reported invalid CHS sector 0 ata5.00: device reported invalid CHS sector 0 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x3f SErr 0x0 action 0x6 frozen ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/40:00:c8:1e:5a/00:00:00:00:00/40 tag 0 ncq 32768 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/c0:08:10:1f:5a/00:00:00:00:00/40 tag 1 ncq 98304 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/00:10:a0:96:53/01:00:00:00:00/40 tag 2 ncq 131072 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/40:18:30:a5:53/00:00:00:00:00/40 tag 3 ncq 32768 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/c0:20:78:a5:53/00:00:00:00:00/40 tag 4 ncq 98304 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/00:28:a8:9b:53/01:00:00:00:00/40 tag 5 ncq 131072 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5: hard resetting link ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: configured for UDMA/133 ata5.00: device reported invalid CHS sector 0 ata5.00: device reported invalid CHS sector 0 ata5.00: device reported invalid CHS sector 0 ata5.00: device reported invalid CHS sector 0 ata5.00: device reported invalid CHS sector 0 ata5.00: device reported invalid CHS sector 0 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/00:00:f8:21:5a/01:00:00:00:00/40 tag 0 ncq 131072 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/80:08:f8:22:5a/00:00:00:00:00/40 tag 1 ncq 65536 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5: hard resetting link ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: configured for UDMA/133 ata5.00: device reported invalid CHS sector 0 ata5.00: device reported invalid CHS sector 0 ata5: EH complete ata5.00: NCQ disabled due to excessive errors ata5.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6 frozen ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/40:00:c0:ac:59/00:00:00:00:00/40 tag 0 ncq 32768 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/20:08:08:ad:59/00:00:00:00:00/40 tag 1 ncq 16384 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/08:10:00:62:52/00:00:00:00:00/40 tag 2 ncq 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5: hard resetting link ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: configured for UDMA/133 ata5.00: device reported invalid CHS sector 0 ata5.00: device reported invalid CHS sector 0 ata5.00: device reported invalid CHS sector 0 ata5: EH complete EXT3-fs (sda7): using internal journal ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x1000000 action 0x6 frozen ata5.00: edma_err_cause=00000020 pp_flags=00000001, SError=01000000 ata5: SError: { TrStaTrns } ata5.00: failed command: READ DMA ata5.00: cmd c8/00:08:58:f7:01/00:00:00:00:00/e0 tag 0 dma 4096 in res d0/00:08:58:f7:01/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) ata5.00: status: { Busy } ata5: hard resetting link ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: configured for UDMA/133 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata5.00: failed command: READ DMA ata5.00: cmd c8/00:08:78:f7:01/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:08:58:f7:01/00:00:00:00:00/e0 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5: hard resetting link ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: configured for UDMA/133 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata5.00: failed command: READ DMA ata5.00: cmd c8/00:08:98:f7:01/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:08:58:f7:01/00:00:00:00:00/e0 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5: hard resetting link ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: configured for UDMA/133 ata5: EH complete ata5: limiting SATA link speed to 1.5 Gbps ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata5.00: failed command: READ DMA ata5.00: cmd c8/00:08:38:f9:01/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:08:58:f7:01/00:00:00:00:00/e0 Emask 0x4 (timeout) ata5.00: status: { DRDY } ata5: hard resetting link ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata5.00: configured for UDMA/133 ata5: EH complete kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): recovery complete EXT3-fs (sda1): mounted filesystem with ordered data mode kjournald starting. Commit interval 5 seconds EXT3-fs (sda5): warning: checktime reached, running e2fsck is recommended EXT3-fs (sda5): using internal journal EXT3-fs (sda5): recovery complete EXT3-fs (sda5): mounted filesystem with ordered data mode Adding 514076k swap on /dev/sda3. Priority:-1 extents:1 across:514076k NTFS driver 2.1.30 [Flags: R/W MODULE]. fuse init (API version 7.21) Register Driver 'usblp' usbcore: registered new interface driver usblp RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). iSCSI Enterprise Target Software - version trunk iscsi_trgt: Registered io type fileio iscsi_trgt: Registered io type blockio iscsi_trgt: Registered io type nullio Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) Linux video capture interface: v2.00 uvcvideo: Unable to create debugfs directory Register Driver 'uvcvideo' usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int32x1 24 MB/s raid6: int32x2 37 MB/s raid6: int32x4 44 MB/s raid6: int32x8 56 MB/s raid6: using algorithm int32x8 (56 MB/s) raid6: using intx1 recovery algorithm async_tx: api initialized (async) xor: measuring software checksum speed arm4regs : 429.200 MB/sec 8regs : 336.800 MB/sec 32regs : 496.800 MB/sec xor: using function: 32regs (496.800 MB/sec) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 md: md0 still in use. md: bind<sdc8> md: bind<sdd8> md: bind<sde8> md: bind<sdb8> md: kicking non-fresh sdc8 from array! md: unbind<sdc8> md: export_rdev(sdc8) md/raid:md0: device sdb8 operational as raid disk 0 md/raid:md0: device sde8 operational as raid disk 3 md/raid:md0: device sdd8 operational as raid disk 2 md/raid:md0: allocated 4240kB md/raid:md0: raid level 5 active with 3 out of 4 devices, algorithm 2 RAID conf printout: --- level:5 rd:4 wd:3 disk 0, o:1, dev:sdb8 disk 2, o:1, dev:sdd8 disk 3, o:1, dev:sde8 md0: detected capacity change from 0 to 2990514044928 ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/08:00:98:03:64/00:00:00:00:00/40 tag 0 ncq 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4.00: device reported invalid CHS sector 0 ata4: EH complete md0: unknown partition table ata4.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:00:98:03:64/01:00:00:00:00/40 tag 0 ncq 131072 in res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/00:08:98:03:64/01:00:00:00:00/40 tag 1 ncq 131072 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata2.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen ata2.00: failed command: READ FPDMA QUEUED ata2.00: cmd 60/80:00:98:03:64/00:00:00:00:00/40 tag 0 ncq 65536 in res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) ata2.00: status: { DRDY } ata2.00: failed command: READ FPDMA QUEUED ata2.00: cmd 60/00:08:98:03:64/01:00:00:00:00/40 tag 1 ncq 131072 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata2.00: status: { DRDY } ata2: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4.00: device reported invalid CHS sector 0 ata4: EH complete ata2.00: configured for UDMA/133 ata2.00: device reported invalid CHS sector 0 ata2: EH complete ata2.00: exception Emask 0x100 SAct 0x1 SErr 0x400000 action 0x6 frozen ata2.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable ata2: SError: { Handshk } ata2.00: failed command: WRITE FPDMA QUEUED ata2.00: cmd 61/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 out res 41/84:00:18:1a:70/84:08:74:00:00/40 Emask 0x10 (ATA bus error) ata2.00: status: { DRDY ERR } ata2.00: error: { ICRC ABRT } ata2: hard resetting link ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: configured for UDMA/133 ata2: EH complete EXT3-fs (sda8): (no)user_xattr options not supported EXT3-fs (sda8): (no)acl options not supported kjournald starting. Commit interval 5 seconds EXT3-fs (sda8): warning: checktime reached, running e2fsck is recommended EXT3-fs (sda8): using internal journal EXT3-fs (sda8): recovery complete EXT3-fs (sda8): mounted filesystem with ordered data mode ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen ata2.00: failed command: READ FPDMA QUEUED ata2.00: cmd 60/08:00:d8:03:64/00:00:00:00:00/40 tag 0 ncq 4096 in res 40/00:00:18:1a:70/84:08:74:00:00/40 Emask 0x4 (timeout) ata2.00: status: { DRDY } ata2: hard resetting link ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: configured for UDMA/133 ata2: EH complete EXT3-fs (md0): (no)user_xattr options not supported EXT3-fs (md0): (no)acl options not supported ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/08:00:20:05:64/00:00:00:00:00/40 tag 0 ncq 4096 in res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4: EH complete ata2: limiting SATA link speed to 1.5 Gbps ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen ata2.00: failed command: READ FPDMA QUEUED ata2.00: cmd 60/08:00:28:05:64/00:00:00:00:00/40 tag 0 ncq 4096 in res 40/00:00:18:1a:70/84:08:74:00:00/40 Emask 0x4 (timeout) ata2.00: status: { DRDY } ata2: hard resetting link ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: configured for UDMA/133 ata2: EH complete ata4.00: NCQ disabled due to excessive errors ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen ata4.00: failed command: READ FPDMA QUEUED ata4.00: cmd 60/08:00:60:05:64/00:00:00:00:00/40 tag 0 ncq 4096 in res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4: EH complete ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: failed command: READ DMA ata4.00: cmd c8/00:08:90:05:64/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4: EH complete kjournald starting. Commit interval 5 seconds EXT3-fs (md0): using internal journal EXT3-fs (md0): recovery complete EXT3-fs (md0): mounted filesystem with ordered data mode ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6 frozen ata4.00: edma_err_cause=04000000 pp_flags=00000001 ata4: SError: { Handshk } ata4.00: failed command: WRITE DMA EXT ata4.00: cmd 35/00:08:18:1a:70/00:00:74:00:00/e0 tag 0 dma 4096 out res 51/84:08:18:1a:70/84:00:74:00:00/e0 Emask 0x10 (ATA bus error) ata4.00: status: { DRDY ERR } ata4.00: error: { ICRC ABRT } ata4: hard resetting link udevd (1005): /proc/1005/oom_adj is deprecated, please use /proc/1005/oom_score_adj instead. udev: starting version 130 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4: EH complete rtc_rs5c372: Unknown symbol kmalloc_caches (err 0) ata1.00: exception Emask 0x100 SAct 0x1 SErr 0x400000 action 0x6 frozen ata1.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable ata1: SError: { Handshk } ata1.00: failed command: WRITE FPDMA QUEUED ata1.00: cmd 61/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 out res 41/84:00:18:1a:70/84:00:74:00:00/40 Emask 0x10 (ATA bus error) ata1.00: status: { DRDY ERR } ata1.00: error: { ICRC ABRT } ata1: hard resetting link ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen ata1.00: failed command: WRITE FPDMA QUEUED ata1.00: cmd 61/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 out res 40/00:00:18:1a:70/84:00:74:00:00/40 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6 frozen ata4.00: edma_err_cause=04000000 pp_flags=00000001 ata4: SError: { Handshk } ata4.00: failed command: WRITE DMA EXT ata4.00: cmd 35/00:08:a8:08:68/00:00:3a:00:00/e0 tag 0 dma 4096 out res 51/84:00:af:08:68/84:00:3a:00:00/e0 Emask 0x10 (ATA bus error) ata4.00: status: { DRDY ERR } ata4.00: error: { ICRC ABRT } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4: EH complete ata4: limiting SATA link speed to 1.5 Gbps ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: failed command: WRITE DMA EXT ata4.00: cmd 35/00:08:a8:08:68/00:00:3a:00:00/e0 tag 0 dma 4096 out res 40/00:00:af:08:68/84:00:3a:00:00/e0 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/133 ata4: EH complete ata1.00: exception Emask 0x100 SAct 0x1 SErr 0x400000 action 0x6 frozen ata1.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable ata1: SError: { Handshk } ata1.00: failed command: WRITE FPDMA QUEUED ata1.00: cmd 61/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 out res 40/00:00:18:1a:70/00:00:74:00:00/40 Emask 0x100 (unknown error) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/00:00:98:05:64/01:00:00:00:00/40 tag 0 ncq 131072 in res 40/00:00:18:1a:70/00:00:74:00:00/40 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen ata3.00: failed command: READ FPDMA QUEUED ata3.00: cmd 60/00:00:98:05:64/01:00:00:00:00/40 tag 0 ncq 131072 in res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) ata3.00: status: { DRDY } ata3: hard resetting link ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: configured for UDMA/133 ata3.00: device reported invalid CHS sector 0 ata3: EH complete ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen ata1.00: failed command: WRITE FPDMA QUEUED ata1.00: cmd 61/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 out res 40/00:00:18:1a:70/00:00:74:00:00/40 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen ata1.00: failed command: WRITE FPDMA QUEUED ata1.00: cmd 61/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 out res 40/00:00:00:00:00/00:00:74:00:00/40 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 ata1.00: device reported invalid CHS sector 0 ata1: EH complete root@fvdwsl-base:/ #

i have 4 disks led that change color blue to red continuosly, but non blinking (immediately after creating the raid)

by **Jocko** » Wed Sep 23, 2015 8:08 am

b1gnas wrote:i have 4 disks led that change color blue to red continuosly, but non blinking (immediately after creating the raid)

This LED behaviour is to indicate that your raid is synchronizing.
You can see the raid statut with

Code: Select all: cat /proc/mdstat

I am sorry but I gave a wrong erase command, so repeat them with

Code: Select all: dd if=/dev/zero of=/dev/db6

(this one erases fully the content)

by **b1gnas** » Wed Sep 23, 2015 8:17 am

Code: Select all: root@fvdwsl-base:/ # dd if=/dev/zero of=/dev/sdb6 dd: writing to `/dev/sdb6': No space left on device 128521+0 records in 128520+0 records out root@fvdwsl-base:/ # dd if=/dev/zero of=/dev/sdc6 dd: writing to `/dev/sdc6': No space left on device 128521+0 records in 128520+0 records out root@fvdwsl-base:/ # dd if=/dev/zero of=/dev/sdd6 dd: writing to `/dev/sdd6': No space left on device 128521+0 records in 128520+0 records out root@fvdwsl-base:/ # dd if=/dev/zero of=/dev/sde6 dd: writing to `/dev/sde6': No space left on device 128521+0 records in 128520+0 records out root@fvdwsl-base:/ # cat /proc/mdstat Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdb8[0] sde8[3] sdd8[2] 2920423872 blocks level 5, 64k chunk, algorithm 2 [4/3] [U_UU] unused devices: <none> root@fvdwsl-base:/ #

sdc led is always red i think there's something wrong

by **Jocko** » Wed Sep 23, 2015 8:25 am

Note: there are many errors in your dmesg (disks; rtc0;...). So need first to resolve this point so that you use the last kernel version.

Now all sd[bcde] partitions are empty, you can try try to reboot the nas.
But before rebooting, post this output

Code: Select all: mdadm --detail /dev/md0

After rebooting post again your dmesg output

by **b1gnas** » Wed Sep 23, 2015 8:27 am

Code: Select all: root@fvdwsl-base:/ # mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Wed Nov 16 13:22:21 2011 Raid Level : raid5 Array Size : 2920423872 (2785.13 GiB 2990.51 GB) Device Size : 973474624 (928.38 GiB 996.84 GB) Raid Devices : 4 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Wed Nov 16 12:48:58 2011 State : clean, degraded Active Devices : 3 Working Devices : 3 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K UUID : fa58a2b1:a56fc1c1:2a5b9325:5626151a Events : 0.75 Number Major Minor RaidDevice State 0 8 56 0 active sync /dev/sdb8 1 0 0 1 removed 2 8 24 2 active sync /dev/sdd8 3 8 8 3 active sync /dev/sde8 root@fvdwsl-base:/ #

rebooting

by **b1gnas** » Wed Sep 23, 2015 8:36 am

after reboot the kernel version is correct

Code: Select all: root@fvdwsl-base:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #1 Thu Jan 8 23:24:14 CET 2015 [ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie 5Big1 Network [ 0.000000] Clearing invalid memory bank 0KB@0x00000000 [ 0.000000] Clearing invalid memory bank 0KB@0x00000000 [ 0.000000] Clearing invalid memory bank 0KB@0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c03de85c, node_mem_map c7efb000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro boardType=mv88F5281 productType=5Big reset=0 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 125736K/131072K available (2809K kernel code, 158K rwdata, 848K rodata, 114K init, 206K bss, 5336K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc039a7f0 (3658 kB) [ 0.000000] .init : 0xc039b000 - 0xc03b78c8 ( 115 kB) [ 0.000000] .data : 0xc03b8000 - 0xc03df9e0 ( 159 kB) [ 0.000000] .bss : 0xc03df9e0 - 0xc04135c0 ( 207 kB) [ 0.000000] NR_IRQS:64 [ 0.000016] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns [ 25.599762] Console: colour dummy device 80x30 [ 25.599801] Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464) [ 25.659457] pid_max: default: 32768 minimum: 301 [ 25.659663] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 25.659691] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 25.660533] CPU: Testing write buffer coherency: ok [ 25.661051] Setting up static identity map for 0x2a8b20 - 0x2a8b5c [ 25.664529] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 25.665492] NET: Registered protocol family 16 [ 25.666370] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 25.669559] 5big1 init started [ 25.669588] Orion ID: MV88F5281-D0. TCLK=166666667. [ 25.669649] Orion: Applying 5281 D0 WFI workaround. [ 25.669998] 5big1 init 1 [ 25.670019] initial MPP regs: 00000003 00000000 00170000 [ 25.670059] final MPP regs: 00000003 00000000 00170000 [ 25.670088] 5big1 init 2 [ 25.670104] net5big: powering up SATA drives [ 25.670125] 5big1 init 3 [ 25.670138] 5big1 init 4 [ 25.670494] 5big1 init 5 [ 25.671436] 5big1 init 6 [ 25.671764] 5big1 init 7 [ 25.672093] 5big1 init 8 [ 25.672429] 5big1 init 9 [ 25.672760] 5big1 init 10 [ 25.673405] 5big1 init 11 [ 25.673733] 5big1 init 12 [ 25.673756] net5big: turning off power-off control GPIO [ 25.673779] net5big: Flash writing is not yet supported. [ 25.673794] 5big1 init end [ 25.674740] orion_gpio_is_valid: invalid GPIO 20 [ 25.674763] orion_gpio_is_valid: invalid GPIO 20 [ 25.674780] net5big_pci_preinit failed to gpio_request 20 [ 25.675333] PCI host bridge to bus 0000:00 [ 25.675377] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] [ 25.675407] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 25.675437] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 25.675499] pci 0000:00:00.0: [11ab:5281] type 00 class 0x058000 [ 25.675547] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref] [ 25.675581] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x07ffffff] [ 25.676151] PCI: bus0: Fast back to back transfers disabled [ 25.676191] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 25.676746] PCI host bridge to bus 0000:01 [ 25.676790] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff] [ 25.676819] pci_bus 0000:01: root bus resource [io 0x10000-0x1ffff] [ 25.676849] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff] [ 25.676921] pci 0000:01:00.0: [11ab:5281] type 00 class 0x058000 [ 25.676978] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x07ffffff 64bit pref] [ 25.677016] pci 0000:01:00.0: reg 0x18: [mem 0x10000000-0x1fffffff 64bit pref] [ 25.677053] pci 0000:01:00.0: reg 0x20: [mem 0xf1000000-0xf10fffff 64bit] [ 25.677089] pci 0000:01:00.0: reg 0x30: [mem 0xe0000000-0xe7ffffff pref] [ 25.677153] pci 0000:01:00.0: supports D1 D2 [ 25.677179] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot [ 25.677744] pci 0000:01:07.0: [11ab:6081] type 00 class 0x010000 [ 25.677808] pci 0000:01:07.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit] [ 25.677845] pci 0000:01:07.0: reg 0x18: [io 0xf0100000-0xf01000ff] [ 25.678448] PCI: bus1: Fast back to back transfers enabled [ 25.678487] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 25.678567] pci 0000:01:07.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit] [ 25.678610] pci 0000:01:07.0: BAR 2: assigned [io 0x10000-0x100ff] [ 25.708179] bio: create slab <bio-0> at 0 [ 25.709592] vgaarb: loaded [ 25.710901] SCSI subsystem initialized [ 25.711856] libata version 3.00 loaded. [ 25.713698] usbcore: registered new interface driver usbfs [ 25.714074] usbcore: registered new interface driver hub [ 25.714500] usbcore: registered new device driver usb [ 25.717595] Switched to clocksource orion_clocksource [ 25.745599] NET: Registered protocol family 2 [ 25.746463] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 25.746522] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 25.746571] TCP: Hash tables configured (established 1024 bind 1024) [ 25.746679] TCP: reno registered [ 25.746706] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 25.746761] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 25.747067] NET: Registered protocol family 1 [ 25.747159] PCI: CLS 32 bytes, default 32 [ 25.749902] futex hash table entries: 256 (order: -1, 3072 bytes) [ 25.750828] VFS: Disk quotas dquot_6.5.2 [ 25.750927] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 25.751192] msgmni has been set to 245 [ 25.753875] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 25.753902] io scheduler noop registered [ 25.753921] io scheduler deadline registered [ 25.753963] io scheduler cfq registered (default) [ 25.754445] mv_xor mv_xor.0: Marvell shared XOR driver [ 25.769485] mv_xor mv_xor.0: Self-test copy failed compare, disabling [ 25.781126] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 25.803060] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3, base_baud = 10416666) is a 16550A [ 26.328553] console [ttyS0] enabled [ 26.351454] brd: module loaded [ 26.363925] loop: module loaded [ 26.367683] Uniform Multi-Platform E-IDE driver [ 26.372860] ide-gd driver 1.18 [ 26.377372] sata_mv 0000:01:07.0: version 1.28 [ 26.378033] sata_mv 0000:01:07.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx [ 26.417069] scsi0 : sata_mv [ 26.421065] scsi1 : sata_mv [ 26.424916] scsi2 : sata_mv [ 26.428791] scsi3 : sata_mv [ 26.432671] scsi4 : sata_mv [ 26.436540] scsi5 : sata_mv [ 26.440440] scsi6 : sata_mv [ 26.444316] scsi7 : sata_mv [ 26.447958] ata1: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8022000 irq 52 [ 26.455637] ata2: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8024000 irq 52 [ 26.463292] ata3: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8026000 irq 52 [ 26.470946] ata4: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8028000 irq 52 [ 26.478585] ata5: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8032000 irq 52 [ 26.486239] ata6: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8034000 irq 52 [ 26.493892] ata7: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8036000 irq 52 [ 26.501540] ata8: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8038000 irq 52 [ 26.511071] sata_mv sata_mv.0: version 1.28 [ 26.511300] sata_mv sata_mv.0: cannot get optional clkdev [ 26.518898] sata_mv sata_mv.0: slots 32 ports 5 [ 26.542641] scsi8 : sata_mv [ 26.546538] scsi9 : sata_mv [ 26.550462] scsi10 : sata_mv [ 26.554436] scsi11 : sata_mv [ 26.558410] scsi12 : sata_mv [ 26.562194] ata9: SATA max UDMA/133 irq 29 [ 26.566289] ata10: SATA max UDMA/133 irq 29 [ 26.570492] ata11: SATA max UDMA/133 irq 29 [ 26.574669] ata12: SATA max UDMA/133 irq 29 [ 26.578841] ata13: SATA max UDMA/133 irq 29 [ 26.584463] tun: Universal TUN/TAP device driver, 1.6 [ 26.589540] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 26.596107] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 26.605083] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 26.621717] libphy: orion_mdio_bus: probed [ 26.626188] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 26.711959] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 48:00:30:00:b0:33 [ 26.723019] aoe: cannot create debugfs directory [ 26.727855] aoe: AoE v85 initialised. [ 26.732593] i2c /dev entries driver [ 27.019517] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 27.059545] ata1.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 27.065718] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 27.129554] ata1.00: configured for UDMA/133 [ 27.134327] scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 27.143432] fvdw1 disk index before get_sd_name = 0 [ 27.148299] device-name= sata_mv [ 27.151552] fvdw2 disk index after get_sd_name = 4 [ 27.156324] fvdw3 prefix[0]=s prefix[1]=d [ 27.160428] fvdw4 diskname = sde [ 27.164649] sd 0:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 27.172324] sd 0:0:0:0: [sde] 4096-byte physical blocks [ 27.179592] sd 0:0:0:0: [sde] Write Protect is off [ 27.184391] sd 0:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 27.184680] sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.238684] sde: sde4 < sde5 sde6 sde7 sde8 > [ 27.247546] sd 0:0:0:0: [sde] Attached SCSI disk [ 27.649470] ata9: failed to resume link (SControl 0) [ 27.654443] ata9: SATA link down (SStatus 0 SControl 0) [ 27.679503] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 27.719558] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 27.725729] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 27.789554] ata2.00: configured for UDMA/133 [ 27.794296] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 27.803401] fvdw1 disk index before get_sd_name = 1 [ 27.808266] device-name= sata_mv [ 27.811520] fvdw2 disk index after get_sd_name = 3 [ 27.816291] fvdw3 prefix[0]=s prefix[1]=d [ 27.820394] fvdw4 diskname = sdd [ 27.824553] sd 1:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 27.832232] sd 1:0:0:0: [sdd] 4096-byte physical blocks [ 27.839348] sd 1:0:0:0: [sdd] Write Protect is off [ 27.844175] sd 1:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 27.844466] sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.899127] sdd: sdd4 < sdd5 sdd6 sdd7 sdd8 > [ 27.907899] sd 1:0:0:0: [sdd] Attached SCSI disk [ 28.339503] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 28.379544] ata3.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 28.385720] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 28.449554] ata3.00: configured for UDMA/133 [ 28.454314] scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 28.463391] fvdw1 disk index before get_sd_name = 2 [ 28.468258] device-name= sata_mv [ 28.471512] fvdw2 disk index after get_sd_name = 2 [ 28.476284] fvdw3 prefix[0]=s prefix[1]=d [ 28.480386] fvdw4 diskname = sdc [ 28.484571] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 28.492250] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 28.499361] sd 2:0:0:0: [sdc] Write Protect is off [ 28.504194] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 28.504484] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.560744] sdc: sdc4 < sdc5 sdc6 sdc7 sdc8 > [ 28.569541] sd 2:0:0:0: [sdc] Attached SCSI disk [ 28.729483] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 28.736005] rtc-rs5c372 0-0032: can't read registers [ 28.741002] rtc-rs5c372: probe of 0-0032 failed with error -5 [ 28.748411] at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write [ 28.999504] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 29.039546] ata4.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 29.045721] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 29.109555] ata4.00: configured for UDMA/133 [ 29.114322] scsi 3:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 29.123384] fvdw1 disk index before get_sd_name = 3 [ 29.128251] device-name= sata_mv [ 29.131502] fvdw2 disk index after get_sd_name = 1 [ 29.136277] fvdw3 prefix[0]=s prefix[1]=d [ 29.140378] fvdw4 diskname = sdb [ 29.144567] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 29.152241] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 29.159361] sd 3:0:0:0: [sdb] Write Protect is off [ 29.164186] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 29.164482] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.216705] sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 > [ 29.225568] sd 3:0:0:0: [sdb] Attached SCSI disk [ 29.659504] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 29.699544] ata5.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 29.705714] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 29.769555] ata5.00: configured for UDMA/133 [ 29.774305] scsi 4:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 29.783402] fvdw1 disk index before get_sd_name = 4 [ 29.788269] device-name= sata_mv [ 29.791522] fvdw2 disk index after get_sd_name = 0 [ 29.796294] fvdw3 prefix[0]=s prefix[1]=d [ 29.800397] fvdw4 diskname = sda [ 29.804586] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 29.812259] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 29.819357] sd 4:0:0:0: [sda] Write Protect is off [ 29.824189] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 29.824478] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.879769] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 29.891247] sd 4:0:0:0: [sda] Attached SCSI disk [ 30.159499] ata6: SATA link down (SStatus 0 SControl 300) [ 30.509496] ata7: SATA link down (SStatus 0 SControl 300) [ 30.749485] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 30.859496] ata8: SATA link down (SStatus 0 SControl 300) [ 31.929471] ata10: failed to resume link (SControl 0) [ 31.934532] ata10: SATA link down (SStatus 0 SControl 0) [ 32.749479] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 33.009469] ata11: failed to resume link (SControl 0) [ 33.014522] ata11: SATA link down (SStatus 0 SControl 0) [ 34.089471] ata12: failed to resume link (SControl 0) [ 34.094530] ata12: SATA link down (SStatus 0 SControl 0) [ 34.749484] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 35.169470] ata13: failed to resume link (SControl 0) [ 35.174522] ata13: SATA link down (SStatus 0 SControl 0) [ 36.749478] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 38.749483] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 38.756021] g762: probe of 0-003e failed with error -110 [ 40.759483] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 42.759479] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 44.759479] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 46.759478] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 48.759479] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 50.759479] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 52.759480] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 54.759479] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 56.759485] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 58.759482] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 60.759482] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 62.759482] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 62.769940] Netfilter messages via NETLINK v0.30. [ 62.775008] ipip: IPv4 over IPv4 tunneling driver [ 62.781200] TCP: cubic registered [ 62.784520] NET: Registered protocol family 17 [ 62.788978] NET: Registered protocol family 5 [ 62.795338] console [netcon0] enabled [ 62.798995] netconsole: network logging started [ 62.803556] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 62.999940] EXT3-fs (sda7): recovery required on readonly filesystem [ 63.006282] EXT3-fs (sda7): write access will be enabled during recovery [ 93.757091] ata5.00: exception Emask 0x0 SAct 0x1fff SErr 0x0 action 0x6 frozen [ 93.764415] ata5.00: failed command: READ FPDMA QUEUED [ 93.769589] ata5.00: cmd 60/08:00:00:7e:52/00:00:00:00:00/40 tag 0 ncq 4096 in [ 93.769589] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.784154] ata5.00: status: { DRDY } [ 93.787816] ata5.00: failed command: READ FPDMA QUEUED [ 93.792991] ata5.00: cmd 60/08:08:08:7e:52/00:00:00:00:00/40 tag 1 ncq 4096 in [ 93.792991] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.807560] ata5.00: status: { DRDY } [ 93.811237] ata5.00: failed command: READ FPDMA QUEUED [ 93.816400] ata5.00: cmd 60/08:10:10:7e:52/00:00:00:00:00/40 tag 2 ncq 4096 in [ 93.816400] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.830964] ata5.00: status: { DRDY } [ 93.834628] ata5.00: failed command: READ FPDMA QUEUED [ 93.839802] ata5.00: cmd 60/08:18:18:7e:52/00:00:00:00:00/40 tag 3 ncq 4096 in [ 93.839802] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.854371] ata5.00: status: { DRDY } [ 93.858033] ata5.00: failed command: READ FPDMA QUEUED [ 93.863208] ata5.00: cmd 60/08:20:20:7e:52/00:00:00:00:00/40 tag 4 ncq 4096 in [ 93.863208] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.877777] ata5.00: status: { DRDY } [ 93.881451] ata5.00: failed command: READ FPDMA QUEUED [ 93.886609] ata5.00: cmd 60/08:28:28:7e:52/00:00:00:00:00/40 tag 5 ncq 4096 in [ 93.886609] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.901174] ata5.00: status: { DRDY } [ 93.904836] ata5.00: failed command: READ FPDMA QUEUED [ 93.910011] ata5.00: cmd 60/08:30:30:7e:52/00:00:00:00:00/40 tag 6 ncq 4096 in [ 93.910011] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.924580] ata5.00: status: { DRDY } [ 93.928242] ata5.00: failed command: READ FPDMA QUEUED [ 93.933417] ata5.00: cmd 60/08:38:38:7e:52/00:00:00:00:00/40 tag 7 ncq 4096 in [ 93.933417] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.947985] ata5.00: status: { DRDY } [ 93.951660] ata5.00: failed command: READ FPDMA QUEUED [ 93.956817] ata5.00: cmd 60/08:40:40:7e:52/00:00:00:00:00/40 tag 8 ncq 4096 in [ 93.956817] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.971382] ata5.00: status: { DRDY } [ 93.975044] ata5.00: failed command: READ FPDMA QUEUED [ 93.980224] ata5.00: cmd 60/08:48:48:7e:52/00:00:00:00:00/40 tag 9 ncq 4096 in [ 93.980224] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.994788] ata5.00: status: { DRDY } [ 93.998450] ata5.00: failed command: READ FPDMA QUEUED [ 94.003625] ata5.00: cmd 60/08:50:50:7e:52/00:00:00:00:00/40 tag 10 ncq 4096 in [ 94.003625] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 94.018281] ata5.00: status: { DRDY } [ 94.021955] ata5.00: failed command: READ FPDMA QUEUED [ 94.027111] ata5.00: cmd 60/08:58:58:7e:52/00:00:00:00:00/40 tag 11 ncq 4096 in [ 94.027111] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 94.041765] ata5.00: status: { DRDY } [ 94.045426] ata5.00: failed command: READ FPDMA QUEUED [ 94.050601] ata5.00: cmd 60/08:60:60:7e:52/00:00:00:00:00/40 tag 12 ncq 4096 in [ 94.050601] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 94.065255] ata5.00: status: { DRDY } [ 94.068933] ata5: hard resetting link [ 94.579514] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 94.679569] ata5.00: configured for UDMA/133 [ 94.683845] ata5.00: device reported invalid CHS sector 0 [ 94.689235] ata5.00: device reported invalid CHS sector 0 [ 94.694649] ata5.00: device reported invalid CHS sector 0 [ 94.700052] ata5.00: device reported invalid CHS sector 0 [ 94.705443] ata5.00: device reported invalid CHS sector 0 [ 94.710851] ata5.00: device reported invalid CHS sector 0 [ 94.716244] ata5.00: device reported invalid CHS sector 0 [ 94.721651] ata5.00: device reported invalid CHS sector 0 [ 94.727044] ata5.00: device reported invalid CHS sector 0 [ 94.732458] ata5.00: device reported invalid CHS sector 0 [ 94.737844] ata5.00: device reported invalid CHS sector 0 [ 94.743252] ata5.00: device reported invalid CHS sector 0 [ 94.748643] ata5.00: device reported invalid CHS sector 0 [ 94.754085] ata5: EH complete [ 124.837144] ata5.00: exception Emask 0x0 SAct 0x3fffffff SErr 0x0 action 0x6 frozen [ 124.844810] ata5.00: failed command: READ FPDMA QUEUED [ 124.849984] ata5.00: cmd 60/08:00:88:7e:52/00:00:00:00:00/40 tag 0 ncq 4096 in [ 124.849984] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 124.864550] ata5.00: status: { DRDY } [ 124.868211] ata5.00: failed command: READ FPDMA QUEUED [ 124.873386] ata5.00: cmd 60/08:08:90:7e:52/00:00:00:00:00/40 tag 1 ncq 4096 in [ 124.873386] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 124.887958] ata5.00: status: { DRDY } [ 124.891629] ata5.00: failed command: READ FPDMA QUEUED [ 124.896786] ata5.00: cmd 60/08:10:98:7e:52/00:00:00:00:00/40 tag 2 ncq 4096 in [ 124.896786] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 124.911352] ata5.00: status: { DRDY } [ 124.915014] ata5.00: failed command: READ FPDMA QUEUED [ 124.920190] ata5.00: cmd 60/08:18:a0:7e:52/00:00:00:00:00/40 tag 3 ncq 4096 in [ 124.920190] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 124.934758] ata5.00: status: { DRDY } [ 124.938420] ata5.00: failed command: READ FPDMA QUEUED [ 124.943594] ata5.00: cmd 60/08:20:a8:7e:52/00:00:00:00:00/40 tag 4 ncq 4096 in [ 124.943594] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 124.958163] ata5.00: status: { DRDY } [ 124.961838] ata5.00: failed command: READ FPDMA QUEUED [ 124.966994] ata5.00: cmd 60/08:28:b0:7e:52/00:00:00:00:00/40 tag 5 ncq 4096 in [ 124.966994] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 124.981560] ata5.00: status: { DRDY } [ 124.985223] ata5.00: failed command: READ FPDMA QUEUED [ 124.990399] ata5.00: cmd 60/08:30:b8:7e:52/00:00:00:00:00/40 tag 6 ncq 4096 in [ 124.990399] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.004967] ata5.00: status: { DRDY } [ 125.008629] ata5.00: failed command: READ FPDMA QUEUED [ 125.013804] ata5.00: cmd 60/08:38:c0:7e:52/00:00:00:00:00/40 tag 7 ncq 4096 in [ 125.013804] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.028373] ata5.00: status: { DRDY } [ 125.032047] ata5.00: failed command: READ FPDMA QUEUED [ 125.037204] ata5.00: cmd 60/08:40:c8:7e:52/00:00:00:00:00/40 tag 8 ncq 4096 in [ 125.037204] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.051769] ata5.00: status: { DRDY } [ 125.055431] ata5.00: failed command: READ FPDMA QUEUED [ 125.060608] ata5.00: cmd 60/08:48:d0:7e:52/00:00:00:00:00/40 tag 9 ncq 4096 in [ 125.060608] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.075176] ata5.00: status: { DRDY } [ 125.078838] ata5.00: failed command: READ FPDMA QUEUED [ 125.084013] ata5.00: cmd 60/08:50:d8:7e:52/00:00:00:00:00/40 tag 10 ncq 4096 in [ 125.084013] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.098667] ata5.00: status: { DRDY } [ 125.102342] ata5.00: failed command: READ FPDMA QUEUED [ 125.107498] ata5.00: cmd 60/08:58:e0:7e:52/00:00:00:00:00/40 tag 11 ncq 4096 in [ 125.107498] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.122151] ata5.00: status: { DRDY } [ 125.125813] ata5.00: failed command: READ FPDMA QUEUED [ 125.130988] ata5.00: cmd 60/08:60:e8:7e:52/00:00:00:00:00/40 tag 12 ncq 4096 in [ 125.130988] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.145643] ata5.00: status: { DRDY } [ 125.149305] ata5.00: failed command: READ FPDMA QUEUED [ 125.154480] ata5.00: cmd 60/08:68:f0:7e:52/00:00:00:00:00/40 tag 13 ncq 4096 in [ 125.154480] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.169135] ata5.00: status: { DRDY } [ 125.172810] ata5.00: failed command: READ FPDMA QUEUED [ 125.177967] ata5.00: cmd 60/08:70:f8:7e:52/00:00:00:00:00/40 tag 14 ncq 4096 in [ 125.177967] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.192618] ata5.00: status: { DRDY } [ 125.196281] ata5.00: failed command: READ FPDMA QUEUED [ 125.201456] ata5.00: cmd 60/08:78:00:7f:52/00:00:00:00:00/40 tag 15 ncq 4096 in [ 125.201456] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.216111] ata5.00: status: { DRDY } [ 125.219787] ata5.00: failed command: READ FPDMA QUEUED [ 125.224951] ata5.00: cmd 60/08:80:08:7f:52/00:00:00:00:00/40 tag 16 ncq 4096 in [ 125.224951] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.239603] ata5.00: status: { DRDY } [ 125.243265] ata5.00: failed command: READ FPDMA QUEUED [ 125.248426] ata5.00: cmd 60/08:88:10:7f:52/00:00:00:00:00/40 tag 17 ncq 4096 in [ 125.248426] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.263078] ata5.00: status: { DRDY } [ 125.266740] ata5.00: failed command: READ FPDMA QUEUED [ 125.271915] ata5.00: cmd 60/08:90:18:7f:52/00:00:00:00:00/40 tag 18 ncq 4096 in [ 125.271915] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.286569] ata5.00: status: { DRDY } [ 125.290247] ata5.00: failed command: READ FPDMA QUEUED [ 125.295410] ata5.00: cmd 60/08:98:20:7f:52/00:00:00:00:00/40 tag 19 ncq 4096 in [ 125.295410] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.310062] ata5.00: status: { DRDY } [ 125.313724] ata5.00: failed command: READ FPDMA QUEUED [ 125.318885] ata5.00: cmd 60/08:a0:28:7f:52/00:00:00:00:00/40 tag 20 ncq 4096 in [ 125.318885] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.333537] ata5.00: status: { DRDY } [ 125.337199] ata5.00: failed command: READ FPDMA QUEUED [ 125.342374] ata5.00: cmd 60/08:a8:30:7f:52/00:00:00:00:00/40 tag 21 ncq 4096 in [ 125.342374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.357030] ata5.00: status: { DRDY } [ 125.360706] ata5.00: failed command: READ FPDMA QUEUED [ 125.365870] ata5.00: cmd 60/08:b0:38:7f:52/00:00:00:00:00/40 tag 22 ncq 4096 in [ 125.365870] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.380521] ata5.00: status: { DRDY } [ 125.384183] ata5.00: failed command: READ FPDMA QUEUED [ 125.389345] ata5.00: cmd 60/08:b8:40:7f:52/00:00:00:00:00/40 tag 23 ncq 4096 in [ 125.389345] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.403997] ata5.00: status: { DRDY } [ 125.407658] ata5.00: failed command: READ FPDMA QUEUED [ 125.412834] ata5.00: cmd 60/08:c0:48:7f:52/00:00:00:00:00/40 tag 24 ncq 4096 in [ 125.412834] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.427488] ata5.00: status: { DRDY } [ 125.431164] ata5.00: failed command: READ FPDMA QUEUED [ 125.436319] ata5.00: cmd 60/08:c8:50:7f:52/00:00:00:00:00/40 tag 25 ncq 4096 in [ 125.436319] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.450971] ata5.00: status: { DRDY } [ 125.454634] ata5.00: failed command: READ FPDMA QUEUED [ 125.459809] ata5.00: cmd 60/08:d0:58:7f:52/00:00:00:00:00/40 tag 26 ncq 4096 in [ 125.459809] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.474464] ata5.00: status: { DRDY } [ 125.478126] ata5.00: failed command: READ FPDMA QUEUED [ 125.483302] ata5.00: cmd 60/08:d8:60:7f:52/00:00:00:00:00/40 tag 27 ncq 4096 in [ 125.483302] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.497956] ata5.00: status: { DRDY } [ 125.501630] ata5.00: failed command: READ FPDMA QUEUED [ 125.506787] ata5.00: cmd 60/08:e0:68:7f:52/00:00:00:00:00/40 tag 28 ncq 4096 in [ 125.506787] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.521440] ata5.00: status: { DRDY } [ 125.525101] ata5.00: failed command: READ FPDMA QUEUED [ 125.530277] ata5.00: cmd 60/08:e8:70:7f:52/00:00:00:00:00/40 tag 29 ncq 4096 in [ 125.530277] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.544931] ata5.00: status: { DRDY } [ 125.548603] ata5: hard resetting link [ 126.059520] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 126.159576] ata5.00: configured for UDMA/133 [ 126.163859] ata5.00: device reported invalid CHS sector 0 [ 126.169248] ata5.00: device reported invalid CHS sector 0 [ 126.174663] ata5.00: device reported invalid CHS sector 0 [ 126.180073] ata5.00: device reported invalid CHS sector 0 [ 126.185465] ata5.00: device reported invalid CHS sector 0 [ 126.190873] ata5.00: device reported invalid CHS sector 0 [ 126.196264] ata5.00: device reported invalid CHS sector 0 [ 126.201673] ata5.00: device reported invalid CHS sector 0 [ 126.207065] ata5.00: device reported invalid CHS sector 0 [ 126.212472] ata5.00: device reported invalid CHS sector 0 [ 126.217864] ata5.00: device reported invalid CHS sector 0 [ 126.223273] ata5.00: device reported invalid CHS sector 0 [ 126.228666] ata5.00: device reported invalid CHS sector 0 [ 126.234073] ata5.00: device reported invalid CHS sector 0 [ 126.239465] ata5.00: device reported invalid CHS sector 0 [ 126.244872] ata5.00: device reported invalid CHS sector 0 [ 126.250282] ata5.00: device reported invalid CHS sector 0 [ 126.255673] ata5.00: device reported invalid CHS sector 0 [ 126.261082] ata5.00: device reported invalid CHS sector 0 [ 126.266473] ata5.00: device reported invalid CHS sector 0 [ 126.271882] ata5.00: device reported invalid CHS sector 0 [ 126.277273] ata5.00: device reported invalid CHS sector 0 [ 126.282683] ata5.00: device reported invalid CHS sector 0 [ 126.288075] ata5.00: device reported invalid CHS sector 0 [ 126.293488] ata5.00: device reported invalid CHS sector 0 [ 126.298874] ata5.00: device reported invalid CHS sector 0 [ 126.304282] ata5.00: device reported invalid CHS sector 0 [ 126.309690] ata5.00: device reported invalid CHS sector 0 [ 126.315082] ata5.00: device reported invalid CHS sector 0 [ 126.320491] ata5.00: device reported invalid CHS sector 0 [ 126.325952] ata5: EH complete [ 156.967104] ata5.00: exception Emask 0x0 SAct 0xfff SErr 0x0 action 0x6 frozen [ 156.974337] ata5.00: failed command: READ FPDMA QUEUED [ 156.979503] ata5.00: cmd 60/08:00:68:7e:52/00:00:00:00:00/40 tag 0 ncq 4096 in [ 156.979503] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 156.994066] ata5.00: status: { DRDY } [ 156.997727] ata5.00: failed command: READ FPDMA QUEUED [ 157.002903] ata5.00: cmd 60/08:08:68:7f:52/00:00:00:00:00/40 tag 1 ncq 4096 in [ 157.002903] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 157.017471] ata5.00: status: { DRDY } [ 157.021148] ata5.00: failed command: READ FPDMA QUEUED [ 157.026311] ata5.00: cmd 60/08:10:60:7f:52/00:00:00:00:00/40 tag 2 ncq 4096 in [ 157.026311] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 157.040877] ata5.00: status: { DRDY } [ 157.044539] ata5.00: failed command: READ FPDMA QUEUED [ 157.049714] ata5.00: cmd 60/08:18:58:7f:52/00:00:00:00:00/40 tag 3 ncq 4096 in [ 157.049714] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 157.064282] ata5.00: status: { DRDY } [ 157.067944] ata5.00: failed command: READ FPDMA QUEUED [ 157.073120] ata5.00: cmd 60/08:20:50:7f:52/00:00:00:00:00/40 tag 4 ncq 4096 in [ 157.073120] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 157.087688] ata5.00: status: { DRDY } [ 157.091363] ata5.00: failed command: READ FPDMA QUEUED [ 157.096520] ata5.00: cmd 60/08:28:48:7f:52/00:00:00:00:00/40 tag 5 ncq 4096 in [ 157.096520] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 157.111085] ata5.00: status: { DRDY } [ 157.114747] ata5.00: failed command: READ FPDMA QUEUED [ 157.119922] ata5.00: cmd 60/08:30:40:7f:52/00:00:00:00:00/40 tag 6 ncq 4096 in [ 157.119922] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 157.134492] ata5.00: status: { DRDY } [ 157.138154] ata5.00: failed command: READ FPDMA QUEUED [ 157.143329] ata5.00: cmd 60/08:38:38:7f:52/00:00:00:00:00/40 tag 7 ncq 4096 in [ 157.143329] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 157.157897] ata5.00: status: { DRDY } [ 157.161575] ata5.00: failed command: READ FPDMA QUEUED [ 157.166737] ata5.00: cmd 60/08:40:30:7f:52/00:00:00:00:00/40 tag 8 ncq 4096 in [ 157.166737] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 157.181303] ata5.00: status: { DRDY } [ 157.184965] ata5.00: failed command: READ FPDMA QUEUED [ 157.190140] ata5.00: cmd 60/08:48:28:7f:52/00:00:00:00:00/40 tag 9 ncq 4096 in [ 157.190140] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 157.204709] ata5.00: status: { DRDY } [ 157.208371] ata5.00: failed command: READ FPDMA QUEUED [ 157.213546] ata5.00: cmd 60/08:50:20:7f:52/00:00:00:00:00/40 tag 10 ncq 4096 in [ 157.213546] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 157.228200] ata5.00: status: { DRDY } [ 157.231875] ata5.00: failed command: READ FPDMA QUEUED [ 157.237032] ata5.00: cmd 60/08:58:70:7e:52/00:00:00:00:00/40 tag 11 ncq 4096 in [ 157.237032] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 157.251684] ata5.00: status: { DRDY } [ 157.255361] ata5: hard resetting link [ 157.759526] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 157.839583] ata5.00: configured for UDMA/133 [ 157.843861] ata5.00: device reported invalid CHS sector 0 [ 157.849251] ata5.00: device reported invalid CHS sector 0 [ 157.854667] ata5.00: device reported invalid CHS sector 0 [ 157.860076] ata5.00: device reported invalid CHS sector 0 [ 157.865468] ata5.00: device reported invalid CHS sector 0 [ 157.870876] ata5.00: device reported invalid CHS sector 0 [ 157.876268] ata5.00: device reported invalid CHS sector 0 [ 157.881676] ata5.00: device reported invalid CHS sector 0 [ 157.887068] ata5.00: device reported invalid CHS sector 0 [ 157.892475] ata5.00: device reported invalid CHS sector 0 [ 157.897867] ata5.00: device reported invalid CHS sector 0 [ 157.903275] ata5.00: device reported invalid CHS sector 0 [ 157.908706] ata5: EH complete [ 157.959447] ata5: limiting SATA link speed to 1.5 Gbps [ 157.964615] ata5.00: exception Emask 0x100 SAct 0x1 SErr 0x400000 action 0x6 frozen [ 157.972264] ata5.00: edma_err_cause=04000000 pp_flags=00000003 [ 157.978084] ata5: SError: { Handshk } [ 157.981763] ata5.00: failed command: WRITE FPDMA QUEUED [ 157.987013] ata5.00: cmd 61/50:00:e8:5d:56/00:00:00:00:00/40 tag 0 ncq 40960 out [ 157.987013] res 41/84:00:e8:5d:56/84:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 158.002354] ata5.00: status: { DRDY ERR } [ 158.006356] ata5.00: error: { ICRC ABRT } [ 158.010391] ata5: hard resetting link [ 158.519525] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 158.619582] ata5.00: configured for UDMA/133 [ 158.623884] ata5: EH complete [ 158.829756] kjournald starting. Commit interval 5 seconds [ 158.870056] EXT3-fs (sda7): recovery complete [ 158.874410] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 158.880892] VFS: Mounted root (ext3 filesystem) readonly on device 8:71. [ 158.888462] Freeing unused kernel memory: 112K (c039b000 - c03b7000) [ 159.141974] EXT3-fs (sda7): using internal journal [ 159.638902] random: nonblocking pool is initialized [ 160.629735] kjournald starting. Commit interval 5 seconds [ 160.635701] EXT3-fs (sda1): using internal journal [ 160.689614] EXT3-fs (sda1): recovery complete [ 160.693968] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 162.699736] kjournald starting. Commit interval 5 seconds [ 162.705262] EXT3-fs (sda5): warning: checktime reached, running e2fsck is recommended [ 162.713572] EXT3-fs (sda5): using internal journal [ 162.769613] EXT3-fs (sda5): recovery complete [ 162.773970] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 162.937068] Adding 514076k swap on /dev/sda3. Priority:-1 extents:1 across:514076k [ 164.806597] NTFS driver 2.1.30 [Flags: R/W MODULE]. [ 164.842759] fuse init (API version 7.22) [ 164.875134] usbcore: registered new interface driver usblp [ 164.922382] RPC: Registered named UNIX socket transport module. [ 164.928289] RPC: Registered udp transport module. [ 164.933017] RPC: Registered tcp transport module. [ 164.937707] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 165.037518] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 165.112242] Loading iSCSI transport class v2.0-870. [ 165.128757] iscsi: registered transport (tcp) [ 165.167419] Linux video capture interface: v2.00 [ 165.294559] uvcvideo: Unable to create debugfs directory [ 165.300104] usbcore: registered new interface driver uvcvideo [ 165.305830] USB Video Class driver (1.1.1) [ 165.348283] md: raid0 personality registered for level 0 [ 165.382991] md: raid1 personality registered for level 1 [ 165.591662] raid6: int32x1 24 MB/s [ 165.760369] raid6: int32x2 37 MB/s [ 165.930466] raid6: int32x4 46 MB/s [ 166.100337] raid6: int32x8 57 MB/s [ 166.104080] raid6: using algorithm int32x8 (57 MB/s) [ 166.109031] raid6: using intx1 recovery algorithm [ 166.120221] async_tx: api initialized (async) [ 166.147647] xor: measuring software checksum speed [ 166.249489] arm4regs : 429.600 MB/sec [ 166.349482] 8regs : 337.600 MB/sec [ 166.449482] 32regs : 498.000 MB/sec [ 166.453658] xor: using function: 32regs (498.000 MB/sec) [ 166.494143] md: raid6 personality registered for level 6 [ 166.499450] md: raid5 personality registered for level 5 [ 166.504781] md: raid4 personality registered for level 4 [ 166.541019] md: raid10 personality registered for level 10 [ 179.222265] md: bind<sdc8> [ 179.225640] md: bind<sdd8> [ 179.228979] md: bind<sde8> [ 179.232379] md: bind<sdb8> [ 179.235408] md: kicking non-fresh sdc8 from array! [ 179.240252] md: unbind<sdc8> [ 179.243149] md: export_rdev(sdc8) [ 179.257775] md/raid:md0: device sdb8 operational as raid disk 0 [ 179.263723] md/raid:md0: device sde8 operational as raid disk 3 [ 179.269646] md/raid:md0: device sdd8 operational as raid disk 2 [ 179.278021] md/raid:md0: allocated 0kB [ 179.281939] md/raid:md0: raid level 5 active with 3 out of 4 devices, algorithm 2 [ 179.289394] RAID conf printout: [ 179.289412] --- level:5 rd:4 wd:3 [ 179.289432] disk 0, o:1, dev:sdb8 [ 179.289452] disk 2, o:1, dev:sdd8 [ 179.289495] disk 3, o:1, dev:sde8 [ 179.289802] md0: detected capacity change from 0 to 2990514044928 [ 179.297635] md0: unknown partition table [ 214.097080] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 214.104140] ata4.00: failed command: READ FPDMA QUEUED [ 214.109300] ata4.00: cmd 60/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 in [ 214.109300] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 214.123864] ata4.00: status: { DRDY } [ 214.127542] ata4: hard resetting link [ 214.639538] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 214.719594] ata4.00: configured for UDMA/133 [ 214.723896] ata4: EH complete [ 221.084236] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0x1000000 action 0x6 frozen [ 221.091911] ata4.00: edma_err_cause=00000020 pp_flags=00000003, SError=01000000 [ 221.099203] ata4: SError: { TrStaTrns } [ 221.103055] ata4.00: failed command: READ FPDMA QUEUED [ 221.108218] ata4.00: cmd 60/00:00:98:03:64/01:00:00:00:00/40 tag 0 ncq 131072 in [ 221.108218] res 40/00:00:98:03:64/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 221.123573] ata4.00: status: { DRDY } [ 221.127255] ata4: hard resetting link [ 221.131412] ata1.00: exception Emask 0x10 SAct 0x1 SErr 0x1000000 action 0x6 frozen [ 221.139045] ata1.00: edma_err_cause=00000020 pp_flags=00000003, SError=01000000 [ 221.146356] ata1: SError: { TrStaTrns } [ 221.150214] ata1.00: failed command: READ FPDMA QUEUED [ 221.155374] ata1.00: cmd 60/80:00:18:04:64/00:00:00:00:00/40 tag 0 ncq 65536 in [ 221.155374] res 40/00:00:18:04:64/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 221.170630] ata1.00: status: { DRDY } [ 221.174305] ata1: hard resetting link [ 221.659544] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 221.679543] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 221.720358] ata4.00: configured for UDMA/133 [ 221.724668] ata4: EH complete [ 221.729236] ata1.00: configured for UDMA/133 [ 221.733573] ata1: EH complete [ 251.197097] ata2.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen [ 251.204152] ata2.00: failed command: READ FPDMA QUEUED [ 251.209314] ata2.00: cmd 60/80:00:98:03:64/00:00:00:00:00/40 tag 0 ncq 65536 in [ 251.209314] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 251.223964] ata2.00: status: { DRDY } [ 251.227625] ata2.00: failed command: READ FPDMA QUEUED [ 251.232799] ata2.00: cmd 60/00:08:98:03:64/01:00:00:00:00/40 tag 1 ncq 131072 in [ 251.232799] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 251.247540] ata2.00: status: { DRDY } [ 251.251231] ata2: hard resetting link [ 251.759553] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 251.839601] ata2.00: configured for UDMA/133 [ 251.843906] ata2.00: device reported invalid CHS sector 0 [ 251.849317] ata2: EH complete [ 252.187094] ata4.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen [ 252.194148] ata4.00: failed command: READ FPDMA QUEUED [ 252.199309] ata4.00: cmd 60/00:08:98:03:64/01:00:00:00:00/40 tag 1 ncq 131072 in [ 252.199309] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 252.214046] ata4.00: status: { DRDY } [ 252.217723] ata4: hard resetting link [ 252.729546] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 252.809601] ata4.00: configured for UDMA/133 [ 252.813893] ata4.00: device reported invalid CHS sector 0 [ 252.819300] ata4: EH complete [ 253.279749] kjournald starting. Commit interval 5 seconds [ 253.288892] EXT3-fs (sda8): warning: checktime reached, running e2fsck is recommended [ 253.299968] EXT3-fs (sda8): using internal journal [ 253.379634] EXT3-fs (sda8): recovery complete [ 253.383992] EXT3-fs (sda8): mounted filesystem with ordered data mode [ 253.780662] ata4: limiting SATA link speed to 1.5 Gbps [ 253.785806] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0x1000000 action 0x6 frozen [ 253.793474] ata4.00: edma_err_cause=00000020 pp_flags=00000003, SError=01000000 [ 253.800782] ata4: SError: { TrStaTrns } [ 253.804618] ata4.00: failed command: READ FPDMA QUEUED [ 253.809794] ata4.00: cmd 60/08:00:18:05:64/00:00:00:00:00/40 tag 0 ncq 4096 in [ 253.809794] res 40/00:00:18:05:64/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 253.824965] ata4.00: status: { DRDY } [ 253.828644] ata4: hard resetting link [ 254.339547] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 254.439603] ata4.00: configured for UDMA/133 [ 254.443904] ata4: EH complete [ 254.495503] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x1000000 action 0x6 frozen [ 254.503170] ata2.00: edma_err_cause=00000020 pp_flags=00000003, SError=01000000 [ 254.510483] ata2: SError: { TrStaTrns } [ 254.514317] ata2.00: failed command: READ FPDMA QUEUED [ 254.519478] ata2.00: cmd 60/08:00:60:05:64/00:00:00:00:00/40 tag 0 ncq 4096 in [ 254.519478] res 40/00:00:60:05:64/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 254.534648] ata2.00: status: { DRDY } [ 254.538324] ata2: hard resetting link [ 255.049545] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 255.149601] ata2.00: configured for UDMA/133 [ 255.153902] ata2: EH complete [ 255.489808] kjournald starting. Commit interval 5 seconds [ 255.514557] EXT3-fs (md0): using internal journal [ 255.589687] EXT3-fs (md0): recovery complete [ 255.593957] EXT3-fs (md0): mounted filesystem with ordered data mode [ 255.668365] udevd (1044): /proc/1044/oom_adj is deprecated, please use /proc/1044/oom_score_adj instead. [ 255.677918] udev: starting version 130 [ 259.560263] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 262.611694] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 297.557108] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 297.564163] ata2.00: failed command: WRITE FPDMA QUEUED [ 297.569409] ata2.00: cmd 61/08:00:30:0e:64/00:00:00:00:00/40 tag 0 ncq 4096 out [ 297.569409] res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [ 297.584061] ata2.00: status: { DRDY } [ 297.587739] ata2: hard resetting link [ 298.099570] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 298.179610] ata2.00: configured for UDMA/133 [ 298.183891] ata2.00: device reported invalid CHS sector 0 [ 298.189299] ata2: EH complete [ 298.199593] ata2.00: exception Emask 0x100 SAct 0x1 SErr 0x400000 action 0x6 frozen [ 298.207232] ata2.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable [ 298.214772] ata2: SError: { Handshk } [ 298.218436] ata2.00: failed command: WRITE FPDMA QUEUED [ 298.223703] ata2.00: cmd 61/08:00:30:0e:64/00:00:00:00:00/40 tag 0 ncq 4096 out [ 298.223703] res 40/00:00:30:0e:64/84:00:00:00:00/40 Emask 0x100 (unknown error) [ 298.239049] ata2.00: status: { DRDY } [ 298.242741] ata2: hard resetting link [ 298.749573] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 298.849611] ata2.00: configured for UDMA/133 [ 298.853910] ata2: EH complete [ 334.637198] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 334.644266] ata3.00: failed command: READ FPDMA QUEUED [ 334.649430] ata3.00: cmd 60/00:00:98:05:64/01:00:00:00:00/40 tag 0 ncq 131072 in [ 334.649430] res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [ 334.664169] ata3.00: status: { DRDY } [ 334.667845] ata3: hard resetting link [ 335.179580] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 335.259619] ata3.00: configured for UDMA/133 [ 335.263906] ata3.00: device reported invalid CHS sector 0 [ 335.269311] ata3: EH complete root@fvdwsl-base:/ #

by **Jocko** » Wed Sep 23, 2015 8:49 am

The dmesg seems better but still errors with sda7 (or other disks if there is still the dev node issue)

So post

Code: Select all: cat /proc/partitions

Check the current addons volume

Code: Select all: ls -l /direct-usb cat /etc/nas_conf_db.xml|grep 'addonsvolume'

What is the current raid status

Code: Select all: mdadm --detail /dev/md0

Just to see if hwclock issue is solved

Code: Select all: hwclock -w -u

---edit--- you should have the hwclock issue

[ 62.803556] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

by **b1gnas** » Wed Sep 23, 2015 8:55 am

Code: Select all: root@fvdwsl-base:/ # cat /proc/partitions major minor #blocks name 8 0 976762584 sde 8 4 1 sde4 8 5 835380 sde5 8 6 64260 sde6 8 7 514080 sde7 8 8 973474740 sde8 8 16 976762584 sdd 8 20 1 sdd4 8 21 835380 sdd5 8 22 64260 sdd6 8 23 514080 sdd7 8 24 973474740 sdd8 8 32 976762584 sdc 8 36 1 sdc4 8 37 835380 sdc5 8 38 64260 sdc6 8 39 514080 sdc7 8 40 973474740 sdc8 8 48 976762584 sdb 8 52 1 sdb4 8 53 835380 sdb5 8 54 64260 sdb6 8 55 514080 sdb7 8 56 973474740 sdb8 8 64 976762584 sda 8 65 514080 sda1 8 66 514080 sda2 8 67 514080 sda3 8 68 1 sda4 8 69 835380 sda5 8 70 64260 sda6 8 71 514080 sda7 8 72 973474740 sda8 9 0 2920423872 md0 root@fvdwsl-base:/ #

Code: Select all: root@fvdwsl-base:/ # ls -l /direct-usb lrwxrwxrwx 1 root root 11 2011-11-16 12:01 /direct-usb -> /share/1000 root@fvdwsl-base:/ # cat /etc/nas_conf_db.xml|grep 'addonsvolume' <addonsvolume>1000</addonsvolume>

Code: Select all: root@fvdwsl-base:/ # mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Wed Nov 16 13:22:21 2011 Raid Level : raid5 Array Size : 2920423872 (2785.13 GiB 2990.51 GB) Device Size : 973474624 (928.38 GiB 996.84 GB) Raid Devices : 4 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Wed Nov 16 12:02:17 2011 State : clean, degraded Active Devices : 3 Working Devices : 3 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K UUID : fa58a2b1:a56fc1c1:2a5b9325:5626151a Events : 0.83 Number Major Minor RaidDevice State 0 8 56 0 active sync /dev/sdb8 1 0 0 1 removed 2 8 24 2 active sync /dev/sdd8 3 8 8 3 active sync /dev/sde8 root@fvdwsl-base:/ #

Code: Select all: root@fvdwsl-base:/ # hwclock -w -u hwclock: can't open '/dev/misc/rtc': No such file or directory

by **Jocko** » Wed Sep 23, 2015 9:17 am

Now we go to clear fs partitions on sd[bcde]

So do this command for each disk sd[bcde]

Code: Select all: dd if=/dev/zero of=/dev/sdb1 dd if=/dev/zero of=/dev/sdb2 dd if=/dev/zero of=/dev/sdb7 dd if=/dev/zero of=/dev/sdb5

Before rebooting,
- try also to select as new addons volume md0
- post this output I want to check if dev nodes on sda7 are also ok :

Code: Select all: mkdir /tmp/sda7 mount /dev/sda7 /tmp/sda7 ls -l /tmp/sda7/dev/sd[abcde][0-9]

Now restart the nas, and post the outpouts: dmesg, check addonsvol, md0 detail

by **b1gnas** » Wed Sep 23, 2015 9:46 am

there's no sd[bcde]1 and sd[bcde]2
are you sure that it's the right command?

plugout.net

Error creating Raid 5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Who is online