plugout.net

Have been strugglin with this

My 2big vs1 wont show up on the network. Changed cables. all lights are on and blue. Network lights blinking.

Only a device appears on network places named BRW008092BEEA14 whan nas is plugged in

fvdw-sl-assistant.exe autoscan won't show any device

Already changed disk for a clean one

checked on DHCP list on router, it doesn't show up

previously worked fine

which firmware do you use ? ours or lacie ?

Yours, installed 2 years ago, worked great

Are you using windows 10?

Ps if you changed the disk by empty one then you will need to install firmware again

fvdw wrote:Are you using windows 10?

Ps if you changed the disk by empty one then you will need to install firmware again

Windows 10- yes, from three defferent machines all of them previously located said NAS

Yes, I woul have to reinstall the firmware, my problem is that I cannot locate de NAS within the network

Auto-scan wont locate it

If you installed a new disk then you have to install firmware on it first to detect the nas.

Use the fvdw-sl console and the standalone kernel provided with it to see if you can connect to the nas. If thats the case then you can install firmware on your new disk

cmarcopolo wrote:Windows 10- yes,

enable smb 1.0
https://support.microsoft.com/en-sg/kb/2696547
for located nas use putty.exe, connect via ssh, using host name BRW008092BEEA14
login root
password giveit2me
enter "ip route" without quotes and see your nas ip