Page 1 of 2
Can not access cloudbox fvdw location
Posted:
Mon Dec 01, 2025 2:31 pmby tinamar
I can access my public dir's on the Cloudbox but can not access fvdw or any other dir to copy and run the patch file. Tried all the passwords I had written down but no luck. Is there a other way to acces my Cloudbox or do I have to format and restart from scratch?
Thanks
Re: Can not access cloudbox fvdw location
Posted:
Wed Dec 03, 2025 1:23 pmby Jocko
Hi
I assume you created some user accounts previously. So that seems the firmware failed to create the linux user account on nas booting (at least on the last start)
Please to reboot the nas to check if you still have the same behaviour
Re: Can not access cloudbox fvdw location
Posted:
Wed Dec 03, 2025 7:24 pmby tinamar
After Reboot no change, I did find that it is possible to access all directories on a Android tablet without entering any password :thinking
On Windows PC I can access only public dir.
In browser I get only following page but I can not do anything
Re: Can not access cloudbox fvdw location
Posted:
Fri Dec 05, 2025 12:52 pmby Jocko
Hi
Ok it seems some post upgrade jobs failed. You get this firmware web interface if you used previously a custom admin login instead of 'admin-nas' (which would have to be restored :whistle )
So can you post these output after opening a shell window
- Code: Select all
cat /boot.log
cat /postupgrade.log
Re: Can not access cloudbox fvdw location
Posted:
Sat Dec 06, 2025 10:20 amby tinamar
forgive me for being dumb, but how can I open a shell window on the cloudbox if I can not access it?
Re: Can not access cloudbox fvdw location
Posted:
Sun Dec 14, 2025 3:36 pmby tinamar
OK I managed to enter FVDL-SL U boot console but cat command is not recognized, unknown command cat. what am I doing wrong?
thanks
Re: Can not access cloudbox fvdw location
Posted:
Tue Dec 16, 2025 8:20 pmby tinamar
After reading the hole forum.
I try to reinstall the firmware, enter fvdw-sl console, switch off NAS follow all steps and try to install fvdw-sl firmware (UIMAGE 3142 kirkwood 171 standalone)
But I get "file not in tftp directory, abort"
Could someone help me please
Re: Can not access cloudbox fvdw location
Posted:
Wed Dec 17, 2025 4:06 pmby fvdw
did you change the directory of the tftpd32 server?
It be c:\FVDW-SL\...\tftp
On the 3 dots the full name of the fvdw-sl-console folder must be used.
Normally the tftpd32 server should use that by default
Re: Can not access cloudbox fvdw location
Posted:
Thu Dec 18, 2025 11:02 amby tinamar
Not changed directory, as far as I can see all files are there.
Re: Can not access cloudbox fvdw location
Posted:
Thu Dec 18, 2025 11:36 amby tinamar
Thank you for putting me in the right direction, Dir was not found automatically but manual I got it to work as far as the Telnet server starting but it does not connect (time out) Cloudbox IP-address is 192.168.50.10