plugout.net

Hi
my lacie is in

Code: Select all

fvdw-sl 16.1 patched (cloudbox)

and i want upgrade to 17 and then to 18
looking in https://plugout.net/viewtopic.php?f=7&t=2679 i upload path

Code: Select all

fvdw-sl-17-0-console-firmware-upgrade-30may2017-2.zip

and use

Code: Select all

unzip

then i see

Code: Select all

fail: check of the zip file, md5 file not found

i download and extracted it again but it gives me error too

can anyone help me?

thanks

Please read again the topic you refered to, it mentions this

For all devices the procedure is the same, in the firmware upgrade menu of the fvdw-sl web interface click button "firmware upgrade via fvdw-sl server". (So you do not need to download the attached common package)

What you did is trying to install the roll up patch for 17-0 while still using 16-1 firmware. Of course you must first upgrade from 16-1 to 17-0. (See above remark how to do that) before installing the patch file for 17-0. :pound

For upgrading to version 18 read the related upgrade topic carefully, it contains all info you need to perform the upgrade ;)

if i try to upgrade via server it gives me an error.

=> Firmware upgrade step 1 started:
Search firmware version information for cloudbox ...
The latest version available from http://plugout.net is: fvdw-sl 18.2

Check free space on system partition ... OK
Get the bound upgrade files list
Failed to download the upgrade files list
Error 203

in the topic we mentioned before (https://plugout.net/viewtopic.php?f=7&t=2679)

Important remarks:

- To be able to upgrade from version 16-1 to this version you need to install this patch first PATCH ENABLING INSTALL OF FVDW-SL-17-0

Maybe I have misinterpreted the post because I don't know English very well :scratch

Yes you need to install that patch (fvdw-sl-16.1-upgrade-patch-21dec2018.zip) first and you must fill your plugout credentials in system management>setup>firmware interface to be able to download files from our server

Hi

All information is available here :doh https://plugout.net/viewtopic.php?f=7&t=3059

fvdw wrote:Yes you need to install that patch (fvdw-sl-16.1-upgrade-patch-21dec2018.zip) first and you must fill your plugout credentials in system management>setup>firmware interface to be able to download files from our server

ok, the patch is installed, i fill the credentials and when i try to update via server it gives me an error:

=> Firmware upgrade step 1 started:
Search firmware version information for cloudbox ...
The latest version available from http://plugout.net is: fvdw-sl 18.2

Check free space on system partition ... OK
Get the bound upgrade files list
Failed to download the upgrade files list
Error 203

:scratch
thanks for the help :hail

Hi artbol

Did you restart your nas after patching it ? (and also reload fully the interface ?)

Did you read this topic ? https://plugout.net/viewtopic.php?f=7&t=3059 and note the step 5 : Make a manual upgrade and not an auto-upgrade (download package)

So you have to to download the package for version 17.0 and upgrade manually first to version 17.0 :shocked

ok sorry it was all my fault. :sob
I was trying to update via Upload Patch instead of via manual firmware update. :hammerhead

now i am on

Current Firmware Version : fvdw-sl 17.0 patched (cloudbox)

and I am trying to update via server but it gives me the following error

=> Firmware upgrade step 1 started:
Search firmware version information for cloudbox ...
The latest version available from http://plugout.net is: fvdw-sl 18.2

Check free space on system partition ... OK
Get the bound upgrade files list
Failed to download the upgrade files list
Error 203

just in case I have filled in my credentials again but it still does not work

Thank you very much for all the help received, I am very close now :hail

You just have to follow the other steps from the topic I posted previously !

Jocko means the procedure described here https://plugout.net/viewtopic.php?f=7&t=3059
You now need to perform step 6.