plugout.net

Hello:

I have 3 NAS with port 80 to use the web server, the problem begins when i try to connect to webserver out of my network, i tried to foward the ports into router and dont works. Can i change the port 80 of my fvdw-sl nas for another one?

Thanks

Hi Diejeitor123,

No you can not change this port but since version 16.0 there is another way ...

I assume that you forward the port 80 for the nas1. So in the main setup menu, you must enable the proxy gateway (be careful to read the help as in this case you must change all default password for the media servers from nas1) and put in "redirect NAS" field the string "nas2name;nas3name" where nas2name and nas3name are the name of the two other nas.

Then to connect to nas2 or nas3 use the url: http(s)://yourDDNS/nas2name or http(s)://yourDDNS/nas3name

Other solution, on your router you can cross the port. For example: outside port 82 and inside port 80 toward the local IP of NAS2 then the url is http://yourDDNS:82

Thanks, all problem solved, the mistake was in the external network