plugout.net

Posted: **Wed Apr 23, 2014 3:55 pm**

Following the instructions the tftp log reports that UIMAGE-395-NWSP2CL-199 has been sent to my cloudbox but I can't telnet in, firewall is disabled.

Set-up
Cloudbox set to 192.168.0.252 via LaCie web interface and then disk replaced with fresh solid state drive.

thanks!

Posted: **Wed Apr 23, 2014 8:06 pm**

telnet only works with the standalone kernel not kernel 199

If you want to connect to the nas after installing and running the firmware you need to use a ssh client

Posted: **Thu Apr 24, 2014 1:08 pm**

oops, my bad. Installation was successful - thanks for great firmware!

plugout.net

UIMAGE loads but telnet times out

UIMAGE loads but telnet times out

Re: UIMAGE loads but telnet times out

Re: UIMAGE loads but telnet times out