How to restart crashed HTTPD server and Transmission?

[fvdw]

650 days :hail

[Jocko]

Hi

Information is available here :
https://plugout.net/viewtopic.php?f=3&t=3765

[Cubytus]

Awesome, I'll have a look!

[Cubytus]

Again, I finally installed 18.3. The Web interface is still bugged, but when I tried to install patch02 for 18.3, it didn't do anything when I typed in "unzip" and clicked "Aceptar"
:dontknow

[Jocko]

Hi

Very amazing because when you upgrade the firmware it is a fresh environment which is set :scratch

So maybe an issue on your data settings. Then need to investigate step by step

Please please to do

Code: Select all

debugon
reboot but do not load yet the firmware interface

and post

Code: Select all

cat /boot.log
cat /boot-user.log
cat /postupgrade.log
cat /etc/patch_log
cat /var/log/messages
dmesg
mount
df /dev/sda5

Reset messages file

Code: Select all

echo > /var/log/messages

and load the web-interface and do a submit request. Then post

Code: Select all

cat /var/log/messages

Later you can disable debug mode

[Cubytus]

WARNING: giant post ahead! :oops:

OK, I turned on debug without any argument, rebooted from command line. I also hope this will help tackle Transmission's failure to start (just noticed that while looking for a solution)

Please note that it is awkward: unlike when in a normal process, I can't scroll through the Terminal with the mouse, but instead get internal codes like:

Code: Select all

root@fvdwsl-base:/ # z:z:z:z:z

or

Code: Select all

root@fvdwsl-base:/ # ?=?=?=?=?=?=?=

It may have something to do with the debug mode:

It takes 2-3 minutes for fvdw firmware to give back control. Since I can't simply select and copy-paste, I dumped the output to a shared folder, as a single command line:

Code: Select all

cat /boot.log > /share/1000/fvdw/18.3debug/boot.log && cat /postupgrade.log > /share/1000/fvdw/18.3debug/postupgrade.log && cat /var/log/messages > /share/1000/fvdw/18.3debug/messages && dmesg > /share/1000/fvdw/18.3debug/dmesg && mount > /share/1000/fvdw/18.3debug/mount &&  df /dev/sda5 > /share/1000/fvdw/18.3debug/df_sda5

As there's no boot-user.log nor patch_log in /, I skipped them.

Copy-pasted the resulting files from the share:

/boot.log:

Code: Select all

# cat /boot.log
start boot log
is a physical machine
detect and set platform
cloudbox
kirkwood
UIMAGE-414133-KIRKWOOD-5
Current kernel: 4.14.133 #5 PREEMPT Thu Aug 10 15:38:37 CEST 2023
device cloudbox
family kirkwood
Arm: found a non valid system disk dev, setting it to sda
system disk = sda
 mount dev/pts
update dev nodes
booting using sda1 root file system...
enable IP forwarding...
run udevstart to update dev nodes when necessary
inserting kernel modules:
modprobe: module 'iscsi_trgt' not found
start buttons control daemon
device = cloudbox
source = buttons-cloudbox
buttons-nwsp2 daemon started
Sun Apr 27 11:52:05 EDT 2025
configuration partition is rightly mounted
create temporary passwd file
create temporary group file
set samba environment for version 3.0.37
configure loopback network interface
setting reboot and standby
cloudbox
rebootd-cloudbox
cloudbox
standbyd-cloudbox
starting php based setup routines step 1
mwexec()[2025/04/27 11:52:18]: killall syslogd
 * Starting syslogd... mwexec()[2025/04/27 11:52:18]: /sbin/syslogd -b 5
                [ OK ]
 * Initialize the volatile db file...mwexec()[2025/04/27 11:52:18]: chown 99:99 '/tmp/etc/nas_conf_vltl.xml'
mwexec()[2025/04/27 11:52:18]: chmod 666 '/tmp/etc/nas_conf_vltl.xml'
    [ OK ]
 * Starting udevd... mwexec()[2025/04/27 11:52:18]: /sbin/udevd --daemon
mwexec()[2025/04/27 11:52:18]: /sbin/udevadm trigger --action=add
mwexec()[2025/04/27 11:52:19]: /sbin/udevadm settle --timeout=5
                [ OK ]
 * Finishing restore RAID devices...     [ OK ]
 * Found database configuration file...    [ OK ]
mwexec()[2025/04/27 11:52:26]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml
mwexec()[2025/04/27 11:52:26]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak
mwexec()[2025/04/27 11:52:26]: chown 99:99 /rw_fs/etc/nas_conf_db.xml
mwexec()[2025/04/27 11:52:26]: chmod 666 /rw_fs/etc/nas_conf_db.xml
 * Updating Disks database... mwexec()[2025/04/27 11:52:26]: unlink /direct-usb
mwexec()[2025/04/27 11:52:26]: /usr/bin/ln -s /share/1000 /direct-usb
mwexec()[2025/04/27 11:52:26]: unlink /usr/local
mwexec()[2025/04/27 11:52:26]: /usr/bin/ln -s /share/1000/fvdw/addons /usr/local
mwexec()[2025/04/27 11:52:26]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml
mwexec()[2025/04/27 11:52:26]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak
          [ OK ]
 * Starting mount of volumes...
   - Mounting volume Vol-A: mwexec()[2025/04/27 11:52:27]: /bin/mkdir -p /share/1000
mwexec()[2025/04/27 11:52:27]: /bin/mount -o user_xattr,acl,noatime /dev/sda8 /share/1000
mwexec()[2025/04/27 11:52:27]: /usr/bin/chmod 775 '/share/1000'
mwexec()[2025/04/27 11:52:27]: /usr/bin/chgrp sys '/share/1000'
 [ OK ]
 * Finishing mount of volumes...        [ OK ]
 * Generating Hosts File... mwexec()[2025/04/27 11:52:29]: /usr/bin/unlink /etc/hosts
          [ OK ]
 * Configuring System Hostname... mwexec()[2025/04/27 11:52:29]: /usr/bin/hostname 'fvdwsl-base.local'
       [ OK ] 
 * Configuring LAN interface... mwexec()[2025/04/27 11:52:29]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml
mwexec()[2025/04/27 11:52:29]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak
mwexec()[2025/04/27 11:52:29]: /sbin/ifconfig -a 'eth0' 169.254.104.61 netmask 255.255.0.0
mwexec()[2025/04/27 11:52:29]: /sbin/route add default gw '192.168.1.1' dev 'eth0'
mwexec()[2025/04/27 11:52:29]: /sbin/ifconfig 'eth0' up
mwexec()[2025/04/27 11:52:29]: /sbin/udhcpc -b -i 'eth0' -s /etc/api/api_dhcpc.php dhcpdCbScript -x hostname='fvdwsl-base'
mwexec()[2025/04/27 11:52:34]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml
mwexec()[2025/04/27 11:52:34]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak
       [ OK ]
 * Initializing Timezone... mwexec()[2025/04/27 11:52:34]: ln -sf /usr/share/zoneinfo/America/Toronto /etc/localtime
          [ OK ]
 * Starting web server...
   Configure WebDav service : mwexec()[2025/04/27 11:52:36]: rm /etc/webdav.conf
mwexec()[2025/04/27 11:52:36]: chown 99:99 /var/run/.fvdw-htpasswd
mwexec()[2025/04/27 11:52:36]: chown 99:99 /var/run/.mldonkey-htpasswd
mwexec()[2025/04/27 11:52:38]: chown 99:99 /var/run/.public-htpasswd
mwexec()[2025/04/27 11:52:38]: chown 99:99 /var/run/.tf-downloads-htpasswd
mwexec()[2025/04/27 11:52:39]: chown 99:99 /var/run/.tr-downloads-htpasswd
mwexec()[2025/04/27 11:52:39]: chown 99:99 /var/run/.wd-htpasswd
          [ OK ]
   Web server :        mwexec()[2025/04/27 11:52:39]: unlink /etc/proxy.conf
mwexec()[2025/04/27 11:52:39]: cp -f /etc/proxy.conf.0 /etc/proxy.conf
mwexec()[2025/04/27 11:52:39]: sh -c 'echo -e "Redirect /fvdwsl-base /fvdwsl-base/
<Location /fvdwsl-base/ >
   AuthType None
   Require all granted
   ProxyHTMLEnable Off
   RequestHeader unset Accept-Encoding
   Options +Indexes +FollowSymLinks
   ProxyPass http://fvdwsl-base/
   ProxyPassReverse http://fvdwsl-base/
</Location>
" >>/etc/proxy.conf'
mwexec()[2025/04/27 11:52:39]: cp -p /etc/php.ini /etc/php.ini.bak
mwexec()[2025/04/27 11:52:39]: sed -rie 's/(memory_limit =).*$/\1 67M/g' /etc/php.ini
mwexec()[2025/04/27 11:52:39]: sh -c 'echo  > "/etc/SSL_fvdwsl.conf"'
mwexec()[2025/04/27 11:52:39]: /usr/bin/httpd -t -f httpd.0 -d /etc
mwexec()[2025/04/27 11:52:40]: cp -f /etc/httpd.0 /etc/httpd.conf
mwexec()[2025/04/27 11:52:40]: /usr/bin/httpd -t -f httpd.conf -d /etc
mwexec()[2025/04/27 11:52:40]: /usr/bin/httpd -f httpd.conf -d /etc
             [ OK ]
 * Starting mount of internal USB ...
 * Finishing mount internal USB ...     [ OK ]
 * Configuring Disks... mwexec()[2025/04/27 11:52:41]: /usr/sbin/noflushd -n 15 /dev/sda
             [ OK ]
 * Configuring Samba...                [ OK ]
mwexec()[2025/04/27 11:52:41]: /usr/sbin/nmbd -D -l /var/log/samba
mwexec()[2025/04/27 11:52:41]: /usr/sbin/smbd -D -l /var/log/samba
 * Configuring System Users...
   Root password: use default password
   Set usersmwexec()[2025/04/27 11:52:44]: unlink /rw_fs/usr/private/smbpasswd
mwexec()[2025/04/27 11:52:44]: unlink /etc/passwd+
, linux and samba accounts    [ OK ]
 * Starting DDNS Service... mwexec()[2025/04/27 11:52:45]: mkdir -p /rw_fs/tmp/var/cache/ez-ipupdate
mwexec()[2025/04/27 11:52:45]: chmod 777 /rw_fs/tmp/var/cache/ez-ipupdate
mwexec()[2025/04/27 11:52:45]: touch /rw_fs/tmp/var/cache/ez-ipupdate/default-cache
mwexec()[2025/04/27 11:52:45]: /usr/bin/ez-ipupdate --daemon --service-type noip --user 'user:pass' --host host.no-ip.org --period 7200 --timeout 15 --cache-file '/rw_fs/tmp/var/cache/ez-ipupdate/default-cache' --interface web-detect
          [ OK ]
 * Starting Fvdw-sl Discovery Daemon...mwexec()[2025/04/27 11:52:45]: /usr/bin/killall  discoverd
mwexec_bg()[2025/04/27 11:52:45]: /bin/busybox setsid /usr/bin/discoverd
    [ OK ]
 * Starting ZeroConf Service... mwexec()[2025/04/27 11:52:45]: /usr/bin/mkdir -p /rw_fs/tmp/var/run/dbus
mwexec()[2025/04/27 11:52:45]: /usr/bin/dbus-daemon --config-file=/etc/dbus-1/system.conf
mwexec()[2025/04/27 11:52:45]: cp -f /etc/avahi/services/aftpd.service.0 /etc/avahi/services/aftpd.service
mwexec()[2025/04/27 11:52:46]: cp -f /etc/avahi/services/smbd.service.0 /etc/avahi/services/smbd.service
mwexec()[2025/04/27 11:52:46]: rm -f /etc/avahi/services/tm-samba.service
mwexec()[2025/04/27 11:52:46]: rm -f /etc/avahi/services/rsync.service
mwexec()[2025/04/27 11:52:46]: cp -f /etc/avahi/services/ssh.service.0 /etc/avahi/services/ssh.service
mwexec()[2025/04/27 11:52:46]: sed -i 's|<port>.*|<port></port>|' /etc/avahi/services/ssh.service
mwexec()[2025/04/27 11:52:46]: cp -f /etc/avahi/services/ftp.service.0 /etc/avahi/services/ftp.service
mwexec()[2025/04/27 11:52:46]: sed -i 's|<port>.*|<port>4222</port>|' /etc/avahi/services/ftp.service
mwexec()[2025/04/27 11:52:46]: rm -f /etc/avahi/services/sftp.service
mwexec()[2025/04/27 11:52:46]: /usr/sbin/avahi-daemon -D
       [ OK ]
start rpcbind service
starting php based setup routines step 2
mwexec()[2025/04/27 11:52:46]: chmod 755 /rw_fs/etc/dropbear
mwexec()[2025/04/27 11:52:46]: chmod 600 /rw_fs/etc/dropbear/dropbear_rsa_host_key
mwexec()[2025/04/27 11:52:46]: chmod 600 /rw_fs/etc/dropbear/dropbear_dss_host_key
mwexec()[2025/04/27 11:52:46]: chmod 600 /rw_fs/etc/dropbear/dropbear_ecdsa_host_key
mwexec()[2025/04/27 11:52:46]: touch /rw_fs/tmp/var/log/lastlog
mwexec()[2025/04/27 11:52:46]: touch /rw_fs/tmp/var/run/utmp
mwexec()[2025/04/27 11:52:46]: unlink /etc/rootcheck
mwexec()[2025/04/27 11:52:46]: sudo chmod 777 '/rw_fs/.ssh'
mwexec()[2025/04/27 11:52:46]: sudo chmod 700 '/rw_fs/.ssh'
 * Starting dropbear... mwexec()[2025/04/27 11:52:47]: dropbear -p 22 -r '/rw_fs/etc/dropbear/dropbear_rsa_host_key' -r '/rw_fs/etc/dropbear/dropbear_dss_host_key' -r '/rw_fs/etc/dropbear/dropbear_ecdsa_host_key'
             [ OK ]
mwexec()[2025/04/27 11:52:47]: sh -c "chown 0:999 /etc;chmod 775 /etc"
mwexec()[2025/04/27 11:52:47]: unlink /etc/profile
 * Kill temporary dropbear...mwexec()[2025/04/27 11:52:47]: kill -9 808
          [ OK ]
mwexec()[2025/04/27 11:52:47]: choom -p 1471 -n -500
starting php based setup routines step 3
 * Starting NFS Server... mwexec()[2025/04/27 11:52:48]: unlink /etc/exports
mwexec()[2025/04/27 11:52:48]: /usr/sbin/exportfs -r
mwexec()[2025/04/27 11:52:48]: /etc/start-nfs-server
             [ OK ]
 * Starting daemon update Hosts File... mwexec()[2025/04/27 11:52:48]: /usr/sbin/hostd 7200
 [ OK ]
 * Starting Disk Temperature Guard... mwexec()[2025/04/27 11:52:48]: /usr/sbin/temp-guard 56
mwexec()[2025/04/27 11:52:48]: chmod 775 /etc/temp-alert.sh
mwexec()[2025/04/27 11:52:48]: chown 0:999 /etc/temp-alert.sh
    [ OK ]
 * Starting mount of remote shares...
 * Finishing mount shares...           [ OK ]
mwexec()[2025/04/27 11:52:48]: /usr/bin/killall -9 proftpd
 * Starting FTP Service... mwexec()[2025/04/27 11:52:48]: /usr/bin/mkdir -p /var/proftpd
mwexec()[2025/04/27 11:52:48]: /usr/bin/chmod 777 /var/proftpd
mwexec()[2025/04/27 11:52:48]: /usr/bin/rm -Rf /etc/proftpd.conf
mwexec()[2025/04/27 11:52:48]: /usr/bin/touch /etc/proftpd.conf
mwexec()[2025/04/27 11:52:48]: /usr/bin/chmod 666 /etc/proftpd.conf
mwexec()[2025/04/27 11:52:48]: /bin/mkdir -pm 755 /tmp/var/log/proftpd
mwexec()[2025/04/27 11:52:48]: modprobe isofs
mwexec()[2025/04/27 11:52:49]: modprobe udf
mwexec()[2025/04/27 11:52:51]: /usr/sbin/proftpd
mwexec()[2025/04/27 11:52:51]: /usr/bin/chmod 644 /tmp/var/log/proftpd/proftpd.log
             [ OK ]
 * Starting AFP Service... mwexec()[2025/04/27 11:52:51]: /usr/bin/rm -f /rw_fs/tmp/usr/var/netatalk
mwexec()[2025/04/27 11:52:51]: /usr/bin/ln -s /share/1000/netatalk /rw_fs/tmp/usr/var/netatalk
mwexec()[2025/04/27 11:52:51]: /usr/bin/touch /usr/etc/afp.conf
mwexec()[2025/04/27 11:52:51]: /usr/bin/chmod a+w /usr/etc/afp.conf
mwexec()[2025/04/27 11:52:51]: /usr/bin/chmod 655 /usr/etc/afp.conf
mwexec()[2025/04/27 11:52:51]: /usr/sbin/cnid_metad
mwexec()[2025/04/27 11:52:51]: /usr/sbin/cnid_metad
mwexec()[2025/04/27 11:52:51]: /usr/sbin/afpd
             [ OK ]
 * Starting NTP client... mwexec_bg()[2025/04/27 11:52:51]: /bin/busybox setsid sh -c "sleep 60;/bin/ntpd  -p pool.ntp.org"
             [ OK ]
mwexec()[2025/04/27 11:52:51]: unlink /direct-usb
mwexec()[2025/04/27 11:52:51]: ln -s /share/1000 /direct-usb
mwexec()[2025/04/27 11:52:51]: /bin/chmod 777 /var/spool/mqueue
mwexec()[2025/04/27 11:52:51]: /bin/chown 0:0 /var/spool/mqueue
mwexec()[2025/04/27 11:52:52]: /bin/chmod 777 /var/spool/clientmqueue
mwexec()[2025/04/27 11:52:52]: /bin/chown 0:0 /var/spool/clientmqueue
 * Starting vnstat daemon... mwexec()[2025/04/27 11:52:52]: rm -f /usr/htdocs/.vnstat/config.php
mwexec()[2025/04/27 11:52:52]: chown 99 '/usr/htdocs/.vnstat'
mwexec()[2025/04/27 11:52:52]: /usr/sbin/vnstatd -d
          [ OK ]
 * Starting Transmission Client... mwexec()[2025/04/27 11:52:52]: sed -rie 's/"umask":.*/"umask":0,/' /share/1000/tr-daemon/settings.json
mwexec()[2025/04/27 11:56:27]: sh -c 'echo -n 4194304 >/proc/sys/net/core/rmem_max; echo -n 1048576 >/proc/sys/net/core/wmem_max;'
mwexec()[2025/04/27 11:56:27]: sh -c "export EVENT_NOEPOLL=1 && sudo -u rd sh -c \"export CURL_CA_BUNDLE=/usr/ssl/cert.pem && /usr/bin/nice -n 10 /usr/local/bin/transmission-daemon  -g /share/1000/tr-daemon -w '/share/1000/tr-downloads'\""
       [ FAIL ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
    This is fvdw-sl version: fvdw-sl 18.3
    built on: February 20 2024

    LAN IP address: 192.168.1.10 (DHCP)

    Port configuration:

    LAN   -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move smbd en nmbd db files away from ram disk to prevent hanging samba server

------------------------
Monitor if file system check is required on next booting
LED settings

Send a boot mail notification to gestos@domain.net
else loop1 finished
rcS finished

cat /postupgrade.log

Code: Select all

# cat /postupgrade.log
First post upgrade setup routines
   - iface   [ OK ]
   - usbmountmode   [ OK ]
   - timezone   [ OK ]
   - phptimezone   [ OK ]
   - opcache   [ OK ]
   - update-ldsocache   [ OK ]
   - user-update   [ OK ]
   - afp-share-update   [ OK ]
   - update-job-servers   [ OK ]
   - update-usb-disks   [ OK ]
   - webconsole   [ OK ]
   - root-inittab   [ OK ]
   - root-rcS   [ OK ]
Last post upgrade setup routines
   - download-cacert   [ OK ]
   - update-smart-drivedb   [ OK ]
   - update-usbids   [ OK ]

cat /var/log/messages

Code: Select all

# cat /var/log/messages
Apr 27 11:52:18 kirkwood-4 syslog.info syslogd started: BusyBox v1.21.0
Apr 27 11:52:26 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/lsscsi -t
Apr 27 11:52:26 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ata_id -x /dev/sda
Apr 27 11:52:26 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/cat /sys/block/sda/sda8/size
Apr 27 11:52:26 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/mdadm --examine --brief /dev/sda8
Apr 27 11:52:26 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/vol_id -l /dev/sda8
Apr 27 11:52:27 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/sbin/blkid -o value -s TYPE /dev/sda8
Apr 27 11:52:29 kirkwood-4 local0.warn API[2025/04/27 11:52:29] api_dhcpc.php(25)[1293]: calling /etc/api/api_dhcpc.php deconfig
Apr 27 11:52:30 kirkwood-4 local0.warn API[2025/04/27 11:52:30] dhcpcfunc_daemon_state_change.finc(43)[1293]: dhcpc script got state: deconfig as input
Apr 27 11:52:30 kirkwood-4 local0.warn API[2025/04/27 11:52:30] api_dhcpc.php(57)[1293]: deconfig retcode: 0
Apr 27 11:52:33 kirkwood-4 local0.warn API[2025/04/27 11:52:33] api_dhcpc.php(25)[1296]: calling /etc/api/api_dhcpc.php bound
Apr 27 11:52:33 kirkwood-4 local0.warn API[2025/04/27 11:52:33] dhcpcfunc_daemon_state_change.finc(43)[1296]: dhcpc script got state: bound as input
Apr 27 11:52:34 kirkwood-4 local0.warn API[2025/04/27 11:52:34] api_dhcpc.php(57)[1296]: bound retcode: 0
Apr 27 11:52:41 kirkwood-4 user.info noflushd: noflushd 2.8 fvdw version 18 jun 2015 started
Apr 27 11:52:44 kirkwood-4 auth.info passwd: Password for dummy changed by root
Apr 27 11:52:44 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/usr/htdocs ; USER=root ; COMMAND=/usr/bin/smbpasswd -a -s dummy
Apr 27 11:52:44 kirkwood-4 auth.info passwd: Password for usuario changed by root
Apr 27 11:52:44 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/usr/htdocs ; USER=root ; COMMAND=/usr/bin/smbpasswd -a -s usuario
Apr 27 11:52:44 kirkwood-4 auth.info passwd: Password for paul changed by root
Apr 27 11:52:44 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/usr/htdocs ; USER=root ; COMMAND=/usr/bin/smbpasswd -a -s paul
Apr 27 11:52:45 kirkwood-4 auth.info passwd: Password for mariemi changed by root
Apr 27 11:52:45 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/usr/htdocs ; USER=root ; COMMAND=/usr/bin/smbpasswd -a -s mariemi
Apr 27 11:52:45 kirkwood-4 auth.info passwd: Password for uploader changed by root
Apr 27 11:52:45 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/usr/htdocs ; USER=root ; COMMAND=/usr/bin/smbpasswd -a -s uploader
Apr 27 11:52:45 kirkwood-4 user.info discoverd: fvdw-sl discoverd vs 11oct19 daemon started
Apr 27 11:52:45 kirkwood-4 user.info discoverd: discoverd uses ip: 192.168.1.10 and mac address 00d04b943c26
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: Found user 'avahi' (UID 504) and group 'avahi' (GID 504).
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: Successfully dropped root privileges.
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: avahi-daemon 0.6.31 starting up.
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: Loading service file /etc/avahi/services/aftpd.service.
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: Loading service file /etc/avahi/services/ftp.service.
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: Loading service file /etc/avahi/services/smbd.service.
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: Loading service file /etc/avahi/services/ssh.service.
Apr 27 11:52:46 kirkwood-4 daemon.err avahi-daemon[1447]: /etc/avahi/hosts:1: Junk on the end of the line!
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.10.
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: New relevant interface eth0.IPv4 for mDNS.
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: Network interface enumeration completed.
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: Registering new address record for fd61:8967:19a5:0:2d0:4bff:fe94:3c26 on eth0.*.
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: Registering new address record for 192.168.1.10 on eth0.IPv4.
Apr 27 11:52:46 kirkwood-4 daemon.info avahi-daemon[1447]: Registering HINFO record with values 'ARMV5TEL'/'LINUX'.
Apr 27 11:52:46 kirkwood-4 local0.warn API[2025/04/27 11:52:46] nasapi.inc(36)[1450]: nasapi: lock time = 0
Apr 27 11:52:46 kirkwood-4 local0.warn API[2025/04/27 11:52:46] nasapi.inc(49)[1450]: calling 'mrvlDropbearStart'
Apr 27 11:52:46 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 777 /rw_fs/.ssh
Apr 27 11:52:47 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 700 /rw_fs/.ssh
Apr 27 11:52:47 kirkwood-4 authpriv.info dropbear[1471]: Running in background
Apr 27 11:52:47 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/ps -ef
Apr 27 11:52:47 kirkwood-4 daemon.info avahi-daemon[1447]: Server startup complete. Host name is fvdwsl-base.local. Local service cookie is 2426266400.
Apr 27 11:52:47 kirkwood-4 local0.warn API[2025/04/27 11:52:47] nasapi.inc(492)[1450]: mrvlDropbearStart Return Code: 0
Apr 27 11:52:47 kirkwood-4 local0.warn API[2025/04/27 11:52:47] nasapi.inc(36)[1487]: nasapi: lock time = 0
Apr 27 11:52:47 kirkwood-4 local0.warn API[2025/04/27 11:52:47] nasapi.inc(49)[1487]: calling 'mrvlNfsRestart 0'
Apr 27 11:52:48 kirkwood-4 daemon.info avahi-daemon[1447]: Service "fvdwsl-base" (/etc/avahi/services/ssh.service) successfully established.
Apr 27 11:52:48 kirkwood-4 daemon.info avahi-daemon[1447]: Service "fvdwsl-base" (/etc/avahi/services/smbd.service) successfully established.
Apr 27 11:52:48 kirkwood-4 daemon.info avahi-daemon[1447]: Service "fvdwsl-base - FTP server" (/etc/avahi/services/ftp.service) successfully established.
Apr 27 11:52:48 kirkwood-4 daemon.info avahi-daemon[1447]: Service "fvdwsl-base" (/etc/avahi/services/aftpd.service) successfully established.
Apr 27 11:52:48 kirkwood-4 daemon.notice rpc.mountd[1499]: Version 1.2.9 starting
Apr 27 11:52:48 kirkwood-4 daemon.notice rpc.statd[1501]: Version 1.2.9 starting
Apr 27 11:52:48 kirkwood-4 daemon.notice sm-notify[1502]: Version 1.2.9 starting
Apr 27 11:52:48 kirkwood-4 daemon.warn rpc.statd[1501]: Failed to read /var/lib/nfs/state: Success
Apr 27 11:52:48 kirkwood-4 daemon.notice rpc.statd[1501]: Initializing NSM state
Apr 27 11:52:48 kirkwood-4 daemon.warn rpc.statd[1501]: Running as root.  chown /var/lib/nfs to choose different user
Apr 27 11:52:48 kirkwood-4 local0.warn API[2025/04/27 11:52:48] nasapi.inc(492)[1487]: mrvlNfsRestart Return Code: 0
Apr 27 11:52:48 kirkwood-4 user.info hostd: host daemon V2 started
Apr 27 11:52:48 kirkwood-4 user.info hostd: updating hosts file, next update in 7200 seconds when disk remains active
Apr 27 11:52:48 kirkwood-4 user.info temp-guard: temp-guard vs5may15 daemon started
Apr 27 11:52:48 kirkwood-4 user.info temp-guard: temp-guard: temperature limit = 56 oC
Apr 27 11:52:48 kirkwood-4 user.info temp-guard: temp-guard: disks installed: sda=1 sdb=0 sdc=0 sdd=0 sde=0
Apr 27 11:52:48 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ifconfig eth0
Apr 27 11:52:51 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/ls -lAQ /share/1000
Apr 27 11:52:51 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/ls -lAQ /share/1000
Apr 27 11:52:51 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/test -f /tmp/var/log/proftpd/proftpd.log
Apr 27 11:52:51 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/ps -C smbd -o pid=
Apr 27 11:52:52 kirkwood-4 daemon.notice vnstatd[1638]: vnStat daemon 1.14 started. (uid:0 gid:0)
Apr 27 11:52:52 kirkwood-4 daemon.notice vnstatd[1638]: Monitoring: eth0 (1000 Mbit)
Apr 27 11:52:54 kirkwood-4 authpriv.info dropbear[1645]: Child connection from 192.168.1.20:64748
Apr 27 11:52:57 kirkwood-4 authpriv.notice dropbear[1645]: Password auth succeeded for 'root' from 192.168.1.20:64748
Apr 27 11:56:27 kirkwood-4 authpriv.notice sudo:     root : TTY=unknown ; PWD=/share/1000/fvdw/vnstat ; USER=rd ; COMMAND=/bin/sh -c export CURL_CA_BUNDLE=/usr/ssl/cert.pem && /usr/bin/nice -n 10 /usr/local/bin/transmission-daemon  -g /share/1000/tr-daemon -w '/share/1000/tr-do

dmesg

Code: Select all

# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.133 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC)) #5 PREEMPT Thu Aug 10 15:38:37 CEST 2023
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: familybox
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c0929960, node_mem_map cfdfa000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200 reset=0 root=/dev/sda7 cap=gpt,lba64
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 250048K/262144K available (6915K kernel code, 307K rwdata, 1724K rodata, 192K init, 388K bss, 12096K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06c8f94   (6916 kB)
[    0.000000]       .init : 0xc08ae000 - 0xc08de000   ( 192 kB)
[    0.000000]       .data : 0xc08de000 - 0xc092ada0   ( 308 kB)
[    0.000000]        .bss : 0xc0932720 - 0xc099393c   ( 389 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    Tasks RCU enabled.
[    0.000000] NR_IRQS: 114
[    0.000000] Switching to timer-based delay loop, resolution 6ns
[    0.000009] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
[   13.945303] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
[   13.945618] Console: colour dummy device 80x30
[   13.945655] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666)
[   13.945679] pid_max: default: 32768 minimum: 301
[   13.945842] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[   13.945867] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[   13.946434] CPU: Testing write buffer coherency: ok
[   13.947292] Setting up static identity map for 0x81e0 - 0x8238
[   13.947478] Hierarchical SRCU implementation.
[   13.949491] random: get_random_u32 called from bucket_table_alloc+0x14c/0x198 with crng_init=0
[   13.949898] VFP support v0.3: not present
[   13.950181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[   13.950215] futex hash table entries: 256 (order: -1, 3072 bytes)
[   13.950327] xor: measuring software checksum speed
[   14.045724]    arm4regs  :   877.600 MB/sec
[   14.145392]    8regs     :   544.800 MB/sec
[   14.245388]    32regs    :   734.400 MB/sec
[   14.245407] xor: using function: arm4regs (877.600 MB/sec)
[   14.245425] pinctrl core: initialized pinctrl subsystem
[   14.246068] NET: Registered protocol family 16
[   14.246550] DMA: preallocated 256 KiB pool for atomic coherent allocations
[   14.249186] Kirkwood: MV88F6281-A1, TCLK=166666667.
[   14.249220] Feroceon L2: Enabling L2
[   14.249258] Feroceon L2: Cache support initialised.
[   14.250141] kirkwood_init: create proc tsinfo proc
[   14.250165] tsinfo: create proc tsinfo vendor successfully
[   14.250175] familybox, skipping usb init
[   14.250184] initial MPP regs:
[   14.250189]  01002222
[   14.250193]  00003311
[   14.250201]  00000000
[   14.250208]  00000000
[   14.250215]  00000000
[   14.250222]  00000000
[   14.250230]  00000000
[   14.250237]
[   14.250253]   final MPP regs:
[   14.250257]  01002222
[   14.250261]  00003311
[   14.250268]  00000000
[   14.250275]  00000000
[   14.250282]  00000000
[   14.250289]  00000000
[   14.250296]  00000000
[   14.250303]
[   14.253220] Kirkwood PCIe port 0: link down
[   14.253235] Kirkwood PCIe port 1: link up
[   14.253250] PCI: bus0 uses PCIe port 0
[   14.253646] PCI host bridge to bus 0000:00
[   14.253670] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[   14.253686] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[   14.253700] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[   14.253739] pci 0000:00:00.0: [11ab:6281] type 00 class 0x058000
[   14.253774] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
[   14.253789] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0fffffff]
[   14.253861] pci 0000:00:00.0: supports D1 D2
[   14.254424] PCI: bus0: Fast back to back transfers disabled
[   14.254447] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[   14.254455] PCI: bus1 uses PCIe port 1
[   14.254668] PCI host bridge to bus 0000:01
[   14.254689] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff]
[   14.254704] pci_bus 0000:01: root bus resource [io  0x10000-0x1ffff]
[   14.254717] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[   14.254752] PCI: bus1: Fast back to back transfers enabled
[   14.254767] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   14.455936] raid6: int32x1  gen()    94 MB/s
[   14.625891] raid6: int32x1  xor()    55 MB/s
[   14.795650] raid6: int32x2  gen()   119 MB/s
[   14.965770] raid6: int32x2  xor()    74 MB/s
[   15.135739] raid6: int32x4  gen()   114 MB/s
[   15.305687] raid6: int32x4  xor()    77 MB/s
[   15.475814] raid6: int32x8  gen()   103 MB/s
[   15.645441] raid6: int32x8  xor()    68 MB/s
[   15.645452] raid6: using algorithm int32x2 gen() 119 MB/s
[   15.645462] raid6: .... xor() 74 MB/s, rmw enabled
[   15.645471] raid6: using intx1 recovery algorithm
[   15.645760] vgaarb: loaded
[   15.646321] SCSI subsystem initialized
[   15.646635] libata version 3.00 loaded.
[   15.647166] usbcore: registered new interface driver usbfs
[   15.647289] usbcore: registered new interface driver hub
[   15.647419] usbcore: registered new device driver usb
[   15.647680] Linux video capture interface: v2.00
[   15.650342] clocksource: Switched to clocksource orion_clocksource
[   15.650478] VFS: Disk quotas dquot_6.6.0
[   15.650542] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   15.665705] NET: Registered protocol family 2
[   15.666848] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[   15.666894] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[   15.666929] TCP: Hash tables configured (established 2048 bind 2048)
[   15.667012] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   15.667038] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   15.667201] NET: Registered protocol family 1
[   15.667632] RPC: Registered named UNIX socket transport module.
[   15.667647] RPC: Registered udp transport module.
[   15.667656] RPC: Registered tcp transport module.
[   15.667665] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.667693] PCI: CLS 32 bytes, default 32
[   15.667912] NetWinder Floating Point Emulator V0.97 (double precision)
[   15.669619] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[   15.670289] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   15.670682] ntfs: driver 2.1.32 [Flags: R/W].
[   15.670727] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[   15.670889] fuse init (API version 7.26)
[   15.671196] JFS: nTxBlock = 1953, nTxLock = 15628
[   15.672283] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[   15.678286] async_tx: api initialized (async)
[   15.678371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[   15.678385] io scheduler noop registered
[   15.678395] io scheduler deadline registered
[   15.678453] io scheduler cfq registered (default)
[   15.678465] io scheduler mq-deadline registered
[   15.678727] mv_xor mv_xor.0: Marvell shared XOR driver
[   15.736125] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy )
[   15.738419] mv_xor mv_xor.1: Marvell shared XOR driver
[   15.796127] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy )
[   15.803443] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   15.805635] console [ttyS0] disabled
[   15.825986] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[   16.530214] random: fast init done
[   16.533624] console [ttyS0] enabled
[   16.550367] brd: module loaded
[   16.560629] loop: module loaded
[   16.564780] sata_mv sata_mv.0: version 1.28
[   16.564827] sata_mv sata_mv.0: cannot get optional clkdev
[   16.570979] sata_mv sata_mv.0: slots 32 ports 1
[   16.577482] scsi host0: sata_mv
[   16.580997] ata1: SATA max UDMA/133 irq 21
[   16.587259] m25p80 spi0.0: mx25l4005a (512 Kbytes)
[   16.592518] Creating 2 MTD partitions on "spi_flash":
[   16.597686] 0x000000000000-0x00000007d000 : "u-boot"
[   16.603570] 0x00000007e000-0x00000007f000 : "u-boot-env"
[   16.611591] tun: Universal TUN/TAP device driver, 1.6
[   16.617950] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   16.626226] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   16.642586] libphy: orion_mdio_bus: probed
[   16.646982] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   16.846674] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:94:3c:26
[   16.855657] PPP generic driver version 2.4.2
[   16.860270] PPP Deflate Compression module registered
[   16.865312] PPP MPPE Compression module registered
[   16.870187] NET: Registered protocol family 24
[   16.874634] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   16.882165] usbcore: registered new interface driver pegasus
[   16.888081] usbcore: registered new interface driver asix
[   16.893656] usbcore: registered new interface driver ax88179_178a
[   16.899882] usbcore: registered new interface driver cdc_ether
[   16.905907] usbcore: registered new interface driver net1080
[   16.911733] usbcore: registered new interface driver plusb
[   16.917382] usbcore: registered new interface driver cdc_subset
[   16.923462] usbcore: registered new interface driver zaurus
[   16.929267] usbcore: registered new interface driver ipheth
[   16.935028] usbcore: registered new interface driver cdc_ncm
[   16.941445] aoe: cannot create debugfs directory
[   16.946565] aoe: AoE v85 initialised.
[   16.950666] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[   16.956909] i2c /dev entries driver
[   16.960762] uvcvideo: Unable to create debugfs directory
[   16.966265] usbcore: registered new interface driver uvcvideo
[   16.971985] USB Video Class driver (1.1.1)
[   16.976244] gspca_main: v2.14.0 registered
[   16.980439] usbcore: registered new interface driver Philips webcam
[   16.987643] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[   16.996731] device-mapper: multipath round-robin: version 1.2.0 loaded
[   17.003229] device-mapper: multipath queue-length: version 0.2.0 loaded
[   17.009874] device-mapper: multipath service-time: version 0.3.0 loaded
[   17.016539] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   17.022608] device-mapper: raid: Loading target version 1.13.0
[   17.030090] Netfilter messages via NETLINK v0.30.
[   17.034791] nfnl_acct: registering with nfnetlink.
[   17.040439] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[   17.047036] ipip: IPv4 and MPLS over IPv4 tunneling driver
[   17.053299] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.059193] NET: Registered protocol family 10
[   17.064687] Segment Routing with IPv6
[   17.068622] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   17.074280] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[   17.081028] NET: Registered protocol family 17
[   17.085696] Bridge firewalling registered
[   17.089916] NET: Registered protocol family 5
[   17.095263] console [netcon0] enabled
[   17.098978] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   17.105551] netconsole: network logging started
[   17.110492] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   17.117860] rtc-mv rtc-mv: setting system clock to 2025-04-27 15:52:02 UTC (1745769122)
[   17.126051] ata1.00: ATA-8: Hitachi HDS5C4040ALE630, MPAOA3B0, max UDMA/133
[   17.132988] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   17.165473] ata1.00: configured for UDMA/133
[   17.185702] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS5C404 A3B0 PQ: 0 ANSI: 5
[   17.194315] fvdw1 disk index before get_sd_name = 0
[   17.199326] device-name= sata_mv
[   17.202545] fvdw2 disk index after get_sd_name = 0
[   17.207349] fvdw3 prefix[0]=s  prefix[1]=d
[   17.211426] fvdw4 diskname = sda
[   17.215144] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[   17.223511] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   17.228876] sd 0:0:0:0: [sda] Write Protect is off
[   17.233655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.233767] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.283790]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[   17.291605] sd 0:0:0:0: [sda] Attached SCSI disk
[   17.296771] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[   17.333055] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
[   17.351268] EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
[   17.395607] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   17.403270] VFS: Mounted root (ext3 filesystem) on device 8:7.
[   17.409650] Freeing unused kernel memory: 192K
[   17.414077] This architecture does not have kernel memory protection.
[   17.712932] EXT4-fs (sda7): re-mounted. Opts: (null)
[   18.087617] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   18.295597] EXT4-fs (sda1): recovery complete
[   18.335435] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   18.733450] EXT4-fs (sda1): re-mounted. Opts: (null)
[   20.232045] Loading iSCSI transport class v2.0-870.
[   20.241755] iscsi: registered transport (tcp)
[   20.563808] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[   20.765599] EXT4-fs (sda5): recovery complete
[   20.805436] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   20.917065] random: mkswap: uninitialized urandom read (16 bytes read)
[   20.992520] Adding 524284k swap on /dev/sda3.  Priority:-2 extents:1 across:524284k
[   21.084229] random: dropbear: uninitialized urandom read (32 bytes read)
[   32.962491] random: crng init done
[   33.119044] udevd (948): /proc/948/oom_adj is deprecated, please use /proc/948/oom_score_adj instead.
[   33.128496] udev: starting version 130
[   33.571841] synth uevent: /gpiochip0: failed to send uevent
[   33.571860] gpio gpiochip0: uevent: failed to send synthetic uevent
[   33.641891] synth uevent: /gpiochip1: failed to send uevent
[   33.641910] gpio gpiochip1: uevent: failed to send synthetic uevent
[   41.803476] EXT4-fs (sda8): mounting ext3 file system using the ext4 subsystem
[   42.189753] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended
[   42.383681] EXT4-fs (sda8): recovery complete
[   42.425452] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl
[   44.096127] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[   44.102247] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   47.634178] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control enabled
[   47.643945] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   65.969653] capability: warning: `proftpd' uses 32-bit capabilities (legacy support in use)

mount

Code: Select all

# mount
/dev/sda1 on / type ext3 (rw,noatime,data=ordered)
none on /proc type proc (rw,noatime)
none on /sys type sysfs (rw,noatime)
none on /dev/pts type devpts (rw,noatime,mode=600,ptmxmode=000)
/dev/sda5 on /rw_fs type ext3 (rw,noatime,data=ordered)
tmpfs on /rw_fs/tmp/usr/var type tmpfs (rw,noatime,size=5000k)
nfsd on /proc/fs/nfsd type nfsd (rw,noatime)
/dev/sda8 on /share/1000 type ext3 (rw,noatime,data=ordered)
/dev/sda7 on /lacie-boot type ext3 (rw,noatime,data=ordered)
/dev/sda7 on /lib/firmware type ext3 (rw,noatime,data=ordered)

df /dev/sda5

Code: Select all

# df /dev/sda5
Filesystem     1K-blocks  Used Available Use% Mounted on
/dev/sda5         757680  1820    747996   1% /rw_fs

After resetting message files and loading the Web GUI.
What shows in the browser:

$matches[2]

Also, Transmission seems to be crashing soon after boot:

$matches[2]

cat /var/log/messages

Code: Select all

cat /var/log/messages
Apr 27 12:15:57 kirkwood-4 local0.warn API[2025/04/27 12:15:57] nasapi.inc(36)[1361]: nasapi: lock time = 0
Apr 27 12:15:58 kirkwood-4 local0.warn API[2025/04/27 12:15:58] nasapi.inc(49)[1361]: calling 'mrvlGetLanguage'
Apr 27 12:15:58 kirkwood-4 local0.warn API[2025/04/27 12:15:58] nasapi.inc(492)[1361]: mrvlGetLanguage Return Code: sp
Apr 27 12:15:58 kirkwood-4 local0.warn API[2025/04/27 12:15:58] nasapi.inc(36)[1361]: nasapi: lock time = 0
Apr 27 12:15:58 kirkwood-4 local0.warn API[2025/04/27 12:15:58] nasapi.inc(49)[1361]: calling 'mrvlGetLanguage'
Apr 27 12:15:58 kirkwood-4 local0.warn API[2025/04/27 12:15:58] nasapi.inc(492)[1361]: mrvlGetLanguage Return Code: sp
Apr 27 12:16:42 kirkwood-4 local0.warn API[2025/04/27 12:16:42] nasapi.inc(36)[2177]: nasapi: lock time = 0
Apr 27 12:16:42 kirkwood-4 local0.warn API[2025/04/27 12:16:42] nasapi.inc(49)[2177]: calling 'mrvlGetMountPointPath'
Apr 27 12:16:42 kirkwood-4 local0.warn API[2025/04/27 12:16:42] nasapi.inc(492)[2177]: mrvlGetMountPointPath Return Code: /share/1000
Apr 27 12:16:42 kirkwood-4 local0.warn API[2025/04/27 12:16:42] nasapi.inc(36)[2177]: nasapi: lock time = 0
Apr 27 12:16:42 kirkwood-4 local0.warn API[2025/04/27 12:16:42] nasapi.inc(49)[2177]: calling 'mrvlTransmissionServer installed'
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(492)[2177]: mrvlTransmissionServer Return Code: 1
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(36)[2177]: nasapi: lock time = 0
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(49)[2177]: calling 'mrvlTransmissionServer running'
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(492)[2177]: mrvlTransmissionServer Return Code:
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(36)[2177]: nasapi: lock time = 0
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(49)[2177]: calling 'mrvlTransmissionServer getoption'
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(489)[2177]: mrvlTransmissionServer Return Code: Array():log => admin...
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(36)[2177]: nasapi: lock time = 0
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(49)[2177]: calling 'mrvlTransmissionServer hasupdate'
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(489)[2177]: mrvlTransmissionServer Return Code: Array():md5 => 50699916d954262610e50a5c4b744556...


If I try to load another tab, Web GUI states that command still couldn't complete:

Captura de Pantalla 2025-04-27 a la(s) 12.38.01 .png

Matching /var/log/messages:

Code: Select all

Apr 27 12:15:57 kirkwood-4 local0.warn API[2025/04/27 12:15:57] nasapi.inc(36)[1361]: nasapi: lock time = 0
Apr 27 12:15:58 kirkwood-4 local0.warn API[2025/04/27 12:15:58] nasapi.inc(49)[1361]: calling 'mrvlGetLanguage'
Apr 27 12:15:58 kirkwood-4 local0.warn API[2025/04/27 12:15:58] nasapi.inc(492)[1361]: mrvlGetLanguage Return Code: sp
Apr 27 12:15:58 kirkwood-4 local0.warn API[2025/04/27 12:15:58] nasapi.inc(36)[1361]: nasapi: lock time = 0
Apr 27 12:15:58 kirkwood-4 local0.warn API[2025/04/27 12:15:58] nasapi.inc(49)[1361]: calling 'mrvlGetLanguage'
Apr 27 12:15:58 kirkwood-4 local0.warn API[2025/04/27 12:15:58] nasapi.inc(492)[1361]: mrvlGetLanguage Return Code: sp
Apr 27 12:16:42 kirkwood-4 local0.warn API[2025/04/27 12:16:42] nasapi.inc(36)[2177]: nasapi: lock time = 0
Apr 27 12:16:42 kirkwood-4 local0.warn API[2025/04/27 12:16:42] nasapi.inc(49)[2177]: calling 'mrvlGetMountPointPath'
Apr 27 12:16:42 kirkwood-4 local0.warn API[2025/04/27 12:16:42] nasapi.inc(492)[2177]: mrvlGetMountPointPath Return Code: /share/1000
Apr 27 12:16:42 kirkwood-4 local0.warn API[2025/04/27 12:16:42] nasapi.inc(36)[2177]: nasapi: lock time = 0
Apr 27 12:16:42 kirkwood-4 local0.warn API[2025/04/27 12:16:42] nasapi.inc(49)[2177]: calling 'mrvlTransmissionServer installed'
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(492)[2177]: mrvlTransmissionServer Return Code: 1
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(36)[2177]: nasapi: lock time = 0
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(49)[2177]: calling 'mrvlTransmissionServer running'
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(492)[2177]: mrvlTransmissionServer Return Code:
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(36)[2177]: nasapi: lock time = 0
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(49)[2177]: calling 'mrvlTransmissionServer getoption'
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(489)[2177]: mrvlTransmissionServer Return Code: Array():log => admin...
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(36)[2177]: nasapi: lock time = 0
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(49)[2177]: calling 'mrvlTransmissionServer hasupdate'
Apr 27 12:16:43 kirkwood-4 local0.warn API[2025/04/27 12:16:43] nasapi.inc(489)[2177]: mrvlTransmissionServer Return Code: Array():md5 => 50699916d954262610e50a5c4b744556...


[Jocko]

Hi

Indeed it is a strange behavior...

First I notice a bad output in boot.log

Code: Select all

Arm: found a non valid system disk dev, setting it to sda

; I do not think it is related with your issue, but just to understand, please to post

Code: Select all

awk -F '[ /]' '{print $4}' /proc/cmdline
ls -l /dev/sysdisk
ls -l /dev/sda*

[Jocko]

Still in boot.log, there is a bad configuration :

Code: Select all

   Web server :        mwexec()[2025/04/27 11:52:39]: unlink /etc/proxy.conf
mwexec()[2025/04/27 11:52:39]: cp -f /etc/proxy.conf.0 /etc/proxy.conf
mwexec()[2025/04/27 11:52:39]: sh -c 'echo -e "Redirect /fvdwsl-base /fvdwsl-base/
<Location /fvdwsl-base/ >
   AuthType None
   Require all granted
   ProxyHTMLEnable Off
   RequestHeader unset Accept-Encoding
   Options +Indexes +FollowSymLinks
   ProxyPass http://fvdwsl-base/
   ProxyPassReverse http://fvdwsl-base/
</Location>
" >>/etc/proxy.conf'

That means you entered the name of the nas in the field "Redirect NAS" of setup menu (see image). So remove it

mandatory.jpg

I also deteted you select normal option for memory size allocated to the web server. With it, request is sent one by one and not simultaneously. With a cloudbox, you can select the option "enlarged" or "high". Then the web interface will be loaded faster

[Jocko]

Other issue

Code: Select all

* Starting Transmission Client... mwexec()[2025/04/27 11:52:52]: sed -rie 's/"umask":.*/"umask":0,/' /share/1000/tr-daemon/settings.json
mwexec()[2025/04/27 11:56:27]: sh -c 'echo -n 4194304 >/proc/sys/net/core/rmem_max; echo -n 1048576 >/proc/sys/net/core/wmem_max;'
mwexec()[2025/04/27 11:56:27]: sh -c "export EVENT_NOEPOLL=1 && sudo -u rd sh -c \"export CURL_CA_BUNDLE=/usr/ssl/cert.pem && /usr/bin/nice -n 10 /usr/local/bin/transmission-daemon  -g /share/1000/tr-daemon -w '/share/1000/tr-downloads'\""
       [ FAIL ]

About transmission I think settings.json is corrupted. So do

Code: Select all

mv /share/1000/tr-daemon/settings.json /share/1000/tr-daemon/settings.json.corrupted

and try to start again transmission a json file will be generated

[Jocko]

and

After resetting message files and loading the Web GUI.
What shows in the browser:

That means you have xsl bug with your browser and you have to upgrade it to the latest version or install patch02