Accessing my cloudbox-slow blinking blue light V.2

[Jocko]

vsftpd is not running !

So try again

Code: Select all

vsftpd &

[rusina12]

Thanks, got it now! Mananged to save few files, but then got disconnected and got can´t see the drive anymore... :scratch

Code: Select all

fvdw-sta-kirkwood login: root
Password:
root@fvdw-sta-kirkwood:/ # gdisk -l /dev/sda
GPT fdisk (gdisk) version 0.8.5

Problem opening /dev/sda for reading! Error is 6.
root@fvdw-sta-kirkwood:/ #
root@fvdw-sta-kirkwood:/ # gdisk -l /dev/sda
GPT fdisk (gdisk) version 0.8.5

Problem opening /dev/sda for reading! Error is 6.
root@fvdw-sta-kirkwood:/ # fdisk -l

Disk /dev/mtdblock0: 0 MB, 512000 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock0 doesn't contain a valid partition table

Disk /dev/mtdblock1: 0 MB, 4096 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock1 doesn't contain a valid partition table
root@fvdw-sta-kirkwood:/ # gdisk -l /dev/sda
GPT fdisk (gdisk) version 0.8.5

Problem opening /dev/sda for reading! Error is 6.
root@fvdw-sta-kirkwood:/ #


Did some reading but not sure if I should follow these instructions? https://plugout.net/viewtopic.php?f=26&t=2894

[rusina12]

Got it resolved, restarted everything.

[Jocko]

Hi

You got this behaviour because on some sectors, I / O disk access produced a fatal error and brought down the disk.
So with your original issue (LED blinking) and now this event, I think the disk heathy is not good and maybe has a prefail state

[rusina12]

Thanks Jocko! i think the disk is pretty done need to get a new one.

one last thing... when starting vsftpd i get this after some time. Can´t really figure out it, i have ports open and no other connections running...

Code: Select all

:/ # vsftpd &
500 OOPS: could not bind listening IPv4 socket



[Jocko]

Hi

As the OS is running only on memory level, maybe when you do many file transfers, there is a memory usage issue.

So on filezilla side you should limits simultaneous transfer file number (I advice to use only 1 or 2 simultaneous transfers) and maybe the bandwidth usage