how to speed up transfer

[Jocko]

@fvdw
I think so (it is why I asked the output uname -a)

So a step by step:
from viewtopic.php?f=4&t=2345&start=70#p24149, download the 2 packages
- save the tar file ( modules-466-kirkwood-1.tar) in the share fvdw (create it if you did not yet do it)
- unzip the file (UIMAGE-466-KIRKWOOD-2.zip) in the share fvdw

from a shell window (use putty http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html) to open an access on the ssh server => use the port 22), do these commands

1. untar the modules 4.6.6 to the right folders

Code: Select all

tar -xvf /direct-usb/fvdw/modules-466-kirkwood-1.tar -C /

check if the modules are really available

Code: Select all

ls -l /lib/modules/4.6.6

=> you must get an output like this

Code: Select all

root@Acrab:/ # ls -l /lib/modules/4.6.6
total 3364
-rwxr-xr-x  1 root root    8453 2016-08-12 09:19 block2mtd.ko
-rwxr-xr-x  1 root root  143401 2016-08-12 09:19 bonding.ko
-rwxr-xr-x  1 root root 1169156 2016-08-12 09:20 btrfs.ko
-rwxr-xr-x  1 root root   34637 2016-08-12 09:18 cdrom.ko
....


use dd command to write kernel 4.6.6. file to SDA6

Code: Select all

dd if=/direct-usb/fvdw/UIMAGE-466-KIRKWOOD-2 of=/dev/sda6

Then reboot to load the new kernel version

[wd9895]

Perfectly described !

Thanks

[kicsrules]

forgot the root passwd.... i changed it from giveit2me ...

edit: found it... rebooting now


edit 2: speed went to 42 MB/s (from 36) ....


now im transfering from nas to an external usb 3 drive

[PCSilva]

Hello fvdw, again....

Just loaded the new kernel 4.6.6 and improved from 20MB/s to some 40 to 50MB the sending speed!

Receiving, as expected is about the same.

Great work! Thank you so much.