plugout.net

Hello guys!

I'm just wondering if there's something wrong with the WOL feature of my nwsp2, when I put it in wol state the HD keeps spinning at sustained speed.
Magic packet correctly turn on the nas so by itself wol is working fine but I can't explain myself this issue.

Is it a normal behaviour?

cheers
Francesco

No it is not normal business, the hard disk should stop spinning. Unless you have a har disk that doesn't react on the command to go to standby. What the brand and type ?

Here i attach the SMART informations of the HD:

Code: Select all

Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST2000DM001-9YN164
Serial Number:    S240JEVJ
LU WWN Device Id: 5 000c50 051a85aee
Firmware Version: CC4H
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Feb 15 13:01:42 2013 GMT+1
SMART support is: Available - device has SMART capability.
SMART support is: Disabled

The nas is the one with the glorious nousb patched bootcmd ;)

that disk should be able to spin down.

You can try if it reacts on the command by entering in ssh terminal

Code: Select all

hdparm -y

it should then try to spin down, but probably spin up almost directly if still some process is accessing the disk
In WOL mode no process is started before the disk is sent to standby so it should stay in standby mode.

Same here.

HDD went off, LED too.

After a few second it spins up again, LED remains off, Interface not accessible. Magic packet wakes it up again.

But the HDD still spins the entire time

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda LP
Device Model: ST32000542AS
Firmware Version: CC35
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5900 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Feb 15 18:56:40 2013 GMT+1
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

mmm...it seems the wol daemon needs some periodic check if the disk is still on standby, will be put on the to do list

I'd be happy to be your tester ;)

:thumbup I will make a trial version

Success !

ok thks WD9895 we will put this new version in the next upgrade :thumbup