Network Space Max OpenShare Volumes lost

[pasqualeCatucci]

Yes, I see the shares. It's all thanks to you.
If I install fw do I lose the date? Should I destroy the raid?

[Jocko]

fvdw-sl uses another partition table; so you will lose your data and lacie firmware is removed

For restoring lacie firmware, we do not have feedback about it (only with nwsp2)

[pasqualeCatucci]

Hi,
I tryed to install the firmware. Before this operation, I moved all my data on another storage and I created a RAID 1 on Lacie. Than I installed the firmware but when I rebooted the NAS, nothing happens and I reconnected to Lacie Dashboard but the RAID is damaged with first drive corrupted. Know it started the sincronizing ...
The question is, to install the firmware I have to remove one drive and destroy the RAID?

thx for all

pasqualeC

[fvdw]

yes one disk and when you add the next one after install be sure that partition table is removed as the lacie bootloader will check all disk for lacie firmware and boot that when found

[Jocko]

Hi

I am sorry but I do not understand what you made :scratch

I tryed to install the firmware. Before this operation, I moved all my data on another storage and I created a RAID 1 on Lacie. Than I installed the firmware but when I rebooted the NAS, nothing happens and I reconnected to Lacie Dashboard

If you have installed our firmware this can not be done :shocked as the LAcie partitions are destroyed

[pasqualeCatucci]

After recovering the filesystem with your help, I moved all the data to another storage and then I created a RAID1 on the Lacie. I installed the new firmware but upon restarting the LACIE dashboard restarted on the same ip that it had before and the RAID status was degraded with the first disk in error state. RAID1 probably considered the second disk valid, discarding the first which had a different partition table.

pasqualeC

[Jocko]

So you need to reset the 2d disk as posted by fvdw

[pasqualeCatucci]

Thanks so much guys. You are great people!

pasqualeC