pyload related [SOLVED]

[duduo]

You need to use the command pyload in a shell window :
pyload options are
Code:
root@Acrab:/ # pyload --help
Usage /usr/bin/pyload [ start | stop | status | install | uninstall | boot_status ]

status display if pyload is running or not
boot_status enable/disable pyload at the next booting
To use it just give the command
Code:
pyload start
for example to start the server.

how do start pyload server ?

I do not manage to understand how do I use this "shell window" , on Teminal from Macosx doesn't work


this is my boot.log

Code: Select all

start boot log
detect and set platform
nwsp2
UIMAGE-3142-NWSP2CL-2
nwsp2
 mount dev/pts
update dev nodes
booting using sda2 root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
device = nwsp2
source = buttons-nwsp2
buttons-nwsp2 daemon started
Sat Apr  4 18:05:45 UTC 2015
create temporary passwd file
run udevstart to update dev nodes when necessary
inserting kernel modules:
create temporary group file
configure loopback netwerk interface
setting reboot and standby
nwsp2
rebootd-nwsp2
nwsp2
standbyd-nwsp2
starting php based setup routines step 1
 * Finishing restore RAID devices...     [ OK ]
 * Found XML database configuration file...    [ OK ]
 * Updating Disks database...           [ OK ]
 * Starting mount of volumes...
   - Mounting volume Default:  [ OK ]
 * Finishing mount of volumes...        [ OK ]
 * Starting udevd...                 [ OK ]
 * Generating Hosts File...           [ OK ]
 * Configuring System Hostname...        [ OK ] 
 * Configuring LAN interface...        [ OK ]
 * Initializing Timezone...           [ OK ]
 * Starting web server...              [ OK ]
 * Starting mount of internal USB ...
 * Finishing mount internal USB ...     [ OK ]
 * Configuring Disks...              [ OK ]
 * Configuring Samba...                [ OK ]
 * Configuring System Users...
   Root password: use default password
   Set users, linux and samba accounts    [ OK ]
 * Starting syncawayd...              [ OK ]
 * Starting Fvdw-sl Discovery Daemon...    [ OK ]
start rpcbind service
starting php based setup routines step 2
 * Starting dropbear...              [ OK ]
 * Kill temporary dropbear...          [ OK ]
starting php based setup routines step 3
 * Starting daemon update Hosts File...  [ OK ]
 * Starting Disk Temperature Guard...     [ OK ]
 * Starting NTP Server ...              [ OK ]
 * Starting mount of remote shares...
 * Finishing mount shares...           [ OK ]
 * Starting NTP client...              [ OK ]
 * Starting Minidlna Server...           [ OK ]
 * Starting Transmission Client...        [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
    This is fvdw-sl version: fvdw-sl 16.0 patched
    built on: Dec 28 2014

    LAN IP address: 192.168.0.2 (static)

    Port configuration:

    LAN   -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
else loop1 finished
rcS finished

Thank you for you work.

and here is a capture to see my install on this add-on

[duduo]

After first hiccup with terminal (shell window) , I manage to get this add-on to work.
Till this for zip and rar files I use Wget, but this promises a much more.

I have two questions:

1. How do I control Pyload daemon other way than shell window, on restart I need to shell again to start Pyload, there is the other way to do this ?

2. The is a GUI client like on Transsmision ? or another way than Web browser to control this add-on ?

3. There is a another way to pass links to the Pyload, than add procedure from it?

Danke.

[Jocko]

Hi duduo,

1. How do I control Pyload daemon other way than shell window, on restart I need to shell again to start Pyload, there is the other way to do this ?

In the shell window, use the option "boot_status" to enable or disable pyload at booting

2. The is a GUI client like on Transsmision ? or another way than Web browser to control this add-on ?

pyload as its own web interface where you can manage its settings:

pyload webinterface url is : http://yournasname:8000

and the default credentials are:
login: admin
pwd: py1234

It is why there is no pyload menu in the firmware interface.

3. There is a another way to pass links to the Pyload, than add procedure from it?

Sorry, I don't understand well you.

[duduo]

3. There is a another way to pass links to the Pyload, than add procedure from it?
Sorry, I don't understand well you.

What I meant was samething like magnet on torrents or in browser when asociate zip file with on action like save or open, samething to intercept click event.

Thanks.

[Jocko]

Hi duduo,

Ok I see what you mean.

About magnet link, I don't think that pyload support it.

Maybe this guide is what you want:https://code.google.com/p/flashgot-pgoeri/wiki/HowToSetupFlashGotForPyLoad