Hi !! Firmware upgrade from 5.1 to 15

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby Jocko » Tue Oct 01, 2013 9:49 pm

I made an error and now I understand why you was able to install the wrong firmware...

So do this in putty
Code: Select all
echo nwsp1 > /etc/platform

and try again to install the version 10.1 for nwsp1
Jocko
Site Admin - expert
 
Posts: 11357
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby almo65 » Tue Oct 01, 2013 9:51 pm

Ok...i try...
almo65
 
Posts: 24
Joined: Sun Sep 29, 2013 3:40 pm

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby almo65 » Tue Oct 01, 2013 10:00 pm

Now 10.1 and....

login as: root
root@192.168.1.225's password:
root@nastest:/ # cat /etc/platform
nwsp1

:thumbup

...go with 15 version ??
almo65
 
Posts: 24
Joined: Sun Sep 29, 2013 3:40 pm

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby Jocko » Tue Oct 01, 2013 10:02 pm

:-D So seems nice but before post
Code: Select all
cat /boot.log
Jocko
Site Admin - expert
 
Posts: 11357
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby almo65 » Tue Oct 01, 2013 10:21 pm

..ops....now 15.0 !!! :punk :hail

:thumbup :thumbup :thumbup :thumbup
almo65
 
Posts: 24
Joined: Sun Sep 29, 2013 3:40 pm

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby almo65 » Tue Oct 01, 2013 10:25 pm

Now I go to sleep Zzzzz......

Great job !! :applause
almo65
 
Posts: 24
Joined: Sun Sep 29, 2013 3:40 pm

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby Jocko » Tue Oct 01, 2013 10:26 pm

:applause Need to do 2 checks
Post the output of
Code: Select all
 uname -a
and
Code: Select all
cat /boot.log
Jocko
Site Admin - expert
 
Posts: 11357
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby almo65 » Wed Oct 02, 2013 5:28 pm

login as: root
root@192.168.1.225's password:
root@nastest:/ # uname -a
Linux nastest.local 2.6.39.4 #5 PREEMPT Thu Jul 26 17:30:39 GMT+1 2012 armv5tel unknown unknown GNU/Linux
root@nastest:/ # cat /boot.log
start boot log
detect and set platform
nwsp1
UIMAGE-26394-NWSP1-5
nwsp1
update dev nodes
booting using sda2 root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
device = nwsp1
source = buttons-phn
buttons-spd daemon started
Thu Nov 17 08:14:53 GMT+1 2011
create temporary passwd file
run udevstart to update dev nodes when necessary
inserting kernel modules:
configure loopback netwerk interface
setting reboot and standby
nwsp1
rebootd-phn
nwsp1
standbyd-phn
phn adapting motion.conf file
export reset gpio pin
starting php based setup routines step 1

* Found XML database configuration file... [ OK ]
* Updating Disks database... [ OK ]
* Configuring Disks... [ OK ]
* Starting mount of volumes...
- Mounting volume Default: [ OK ]
* Finishing mount of volumes... [ OK ]
* Generating Hosts File... [ OK ]
* Configuring System Hostname... [ OK ]
* Configuring Samba... [ OK ]
* Configuring LAN interface... [ OK ]
* Starting udevd... [ OK ]
* Starting web server... [ OK ]
* Initializing Timezone... [ OK ]
* Configuring Samba... [ OK ]
* Configuring System Users...
Root password: use default password
Set users, linux and samba accounts [ OK ]
* Starting syncawayd... [ OK ]
* Starting Fvdw-sl Discovery Daemon... [ OK ]
start portmap service
starting php based setup routines step 2
* Starting dropbear... [ OK ]
* Kill temporary dropbear... [ OK ]
starting php based setup routines step 3
* Starting daemon update Hosts File... [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
This is fvdw-sl version: fvdw-sl 15.0
built on: September 30 2013

LAN IP address: 192.168.1.225 (static)

Port configuration:

LAN -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move smbd en nmbd db files to ramdisk to enable disk spin down
rcS finished
root@nastest:/ #

:evilwink
almo65
 
Posts: 24
Joined: Sun Sep 29, 2013 3:40 pm

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby Jocko » Wed Oct 02, 2013 6:47 pm

Hi almo65
So all seems right :applause
Now you can explorer all new features since version 5.1...
Jocko
Site Admin - expert
 
Posts: 11357
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby almo65 » Wed Oct 02, 2013 8:22 pm

:bananadance

Thank's :applause
almo65
 
Posts: 24
Joined: Sun Sep 29, 2013 3:40 pm

PreviousNext

Return to Lacie Network Space vs1

Who is online

Users browsing this forum: No registered users and 1 guest