DDNS setup in FVDW firmware

[macdalor]

I am trying to set the access of my FVDW firmware installed NAS from outside my house and have registered a DDNS hostname but the FVDW web interface doesn't register the details in the "Lan setup/DDNS service" tab.

I can enter the details and accept them but when I go to another tab then back the details are gone.

Any idea?

Thx

[Jocko]

I see only one explanation: you do not enter right values and you did not install this patch fvdw-sl-16.1-warning-iesupport-03dec15.zip :tapfoot
Then you did not get the warning

[macdalor]

Thank you Jocko. very helpful as usual...Patch now updated.

The web-explorer is available from my LAN ip but not from outside.

I have setup a ddns hostname on NOIP and setup the certificate but it doesn't seem to be available from outside ...

What could be wrong?

[Jocko]

Do you open the port 80 (http) or 443 (https) on your ISP box ?

[macdalor]

Do you open the port 80 (http) or 443 (https) on your ISP box ?

I did, both ports are open (in tcp that is. UDP not needed is it?)

[Jocko]

UDP is not used.

So what sort of URL do you use ?

[macdalor]

UDP is not used.

So what sort of URL do you use ?

https://hostname/web-explorer

[macdalor]

yes that's what I meant Jocko...hostname here is the NOIP hostname, meaning domain.no-ip.biz.

I sent it to you via pm

[Jocko]

Yes I saw later your pm and I deleted my post.

So all seems to be ok as I got the authentication popup with your url. So your router and your DDNS account are ok.

How do you try your url ?

If you tried from a laptop on your LAN, then maybe your ISP box does not support loopback. For example, you should try from a smartphone and of course don't use the wifi connection to your ISP box.

[macdalor]

brillant! :applause

thx Jocko!