Hello
I have a Lacie NWSP1 with a 1TB drive and FVDWSL 18.2.
But I want to install a 3TB disk but I can't find how to partition this disk which will be in gpt.
I already put the u-boot on the NWSP1 so it should read the gpt.
Can you give me the partitions for a 3TB drive, thanks.
Regards.
plugout.net
Alternative firmware fvdw-sl
SPD8020, Lacie network space vs1,vs2 and max, 5big version 1&2, 2big version 1&2, internet space vs1, edmini_v2, D2 network version 1&2, raspberry Pi b
HDD 3To on NWSP1
2 posts
• Page 1 of 1
HDD 3To on NWSP1
by Jeje76 » Thu May 07, 2020 8:40 am
- Jeje76
- Posts: 1
- Joined: Sun Apr 23, 2017 8:43 am
Re: HDD 3To on NWSP1
by fvdw » Thu May 07, 2020 10:48 am
Hi
You can use an nwsp1 only disk with max capacity of 2TB. This because the bootloader of that device doesn't support GPT partition tables, required for disks bigger than 2 TB
You can use an nwsp1 only disk with max capacity of 2TB. This because the bootloader of that device doesn't support GPT partition tables, required for disks bigger than 2 TB
- fvdw
- Site Admin - expert
- Posts: 13239
- Joined: Tue Apr 12, 2011 2:30 pm
- Location: Netherlands
2 posts
• Page 1 of 1
Return to Lacie Network Space vs1
Who is online
Users browsing this forum: No registered users and 1 guest