I flashed my nwsp vs1 and it's working great with this custom firmware. For noobs... :geek: i've got some additional info for the manual that was written bij fvdw.
But first the forum links for downloading the stuff you need.
1: First time install pack
viewtopic.php?f=7&t=1750&p=13448#p13448
2: latest firmware update
viewtopic.php?f=7&t=1867
(don't forget to read the red text)
And then...
Once you've unzipped the first install pack, you'll find the manual " howto" in the folder. READ IT!
In the beginning i had some trouble with making the right partitions, so here are my findings. (i use Linux Mint 16)
In step: (i). create the new partition table and store on the disk
- you need to change the display/entry units because sectors are shown instead of cylinders.
- Code: Select all
fdisk /dev/sdb
then press u
Output:Command (m for help): u
Changing display/entry units to cylinders (DEPRECATED!)
- you may also need to change the partition table flag to DOS. Why? don't ask :-D but it has something to do with formating the partitions later.
(use fdisk only if you are not in the fdisk menu)
- Code: Select all
fdisk /dev/sdb
then press c
Command (m for help): c
DOS Compatibility flag is set (DEPRECATED!)
That should do the trick. You can follow the rest of the manual as is.