plugout.net

So You can now upgrade with the lacie firmware menu (be careful with version 9.0, you have also the menu for SPD8020)

Download the bin file for version 10.1 from viewtopic.php?f=7&t=235#p1493.
unzip the archive to get the bin file and upload it to the NAS by using the lacie firmware menu.

It's time to go to bed now.
So next tomorrow...

Allright !! Now firmware version phn fvdw-sl 10.1 !! :hail

:thumbup
So the upgrade menu runs well and now you can directly upload the last version 15.0 (and after you should install a small patch about the LED menu)

Note : with the last versions, twonky 5.0 and oxylbox are not available

Thank you for help !! :applause

From web upgrade..... xfvdw-sl-15-0-nwsp1-28sep2013

The response :

Firmware upgrade step 2 started...
Firmware upgrade failed, upgrade process aborted, reason:
fw upgrade found platform file firmware package differs from that on running system

:?:

Ok

xfvdw-sl-15-0-nwsp1-28sep2013 archive on the board is right because for testing I tried with it to upgrade my old nwsp1

Post the outposts of

Code: Select all

cat /etc/platform

and if you didn't make a reboot since time where you try to update

Code: Select all

cat /tmp/PLATFORM

Code: Select all

login as: root
root@192.168.1.225's password:
root@nastest:/ # cat /etc/platform
phn

step 1: uploading firmware package, successful completed
step 2: writing image and (if required) linux kernel to disk partition
step 3: perform reboot

Firmware upgrade step 2 started...
Firmware upgrade failed, upgrade process aborted, reason:
fw upgrade found platform file firmware package differs from that on running system

root@nastest:/ # cat /tmp/PLATFORM
nwsp1

Ok

Do you sure that you use the version 10.1 ?
After installing 10.1, do you restart the NAS ?
Please post these

Code: Select all

ls /lacie-boot

;

Code: Select all

cat /boot.log

;

Code: Select all

 cat /etc/fvdwversion

@jocko if you have send him the new firmware upgrade script using the tag in the database instead of platform file you get this problem unless the tag in the dtabase is updated, by default it contain TG :whistle