Page 1 of 6
Hi !! Firmware upgrade from 5.1 to 15
Posted:
Sun Sep 29, 2013 4:41 pm
by almo65
Hi , i have fvdw firmware version 5.1 on lacie .
I could upgrade to 15 via web interface ??
Sorry for my poor english :dontknow
Re: Hi !! Firmware upgrade from 5.1 to 15
Posted:
Sun Sep 29, 2013 4:56 pm
by Jocko
hi almo65,
No, You can not use the upgrade menu with the version 5.1 (This menu can be use only with SPD8020 with this version)
Need time to find the easiest way to upgrade your NAS.
Re: Hi !! Firmware upgrade from 5.1 to 15
Posted:
Sun Sep 29, 2013 5:15 pm
by Jocko
Ok,
I have still the scripts to upgrade the firmware between each version. You have to upgrade manually upto version 9.0 and then use the upgrade menu
But need to check if you have a right partition table to support later the upgrade menu.
So you could you post this output, I assume you have a SSH access with Putty
- Code: Select all
fdisk /dev/sda
(then enter p)
Re: Hi !! Firmware upgrade from 5.1 to 15
Posted:
Sun Sep 29, 2013 5:18 pm
by almo65
Ok .... download putty .... and execute command ....
Re: Hi !! Firmware upgrade from 5.1 to 15
Posted:
Sun Sep 29, 2013 5:25 pm
by almo65
- Code: Select all
Command (m for help): p
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 32 257008+ 83 Linux
/dev/sda2 33 64 257040 83 Linux
/dev/sda3 65 96 257040 82 Linux swap
/dev/sda4 97 121601 975988912+ 5 Extended
/dev/sda5 97 144 385528+ 83 Linux
/dev/sda6 145 145 8001 83 Linux
/dev/sda7 146 178 265041 83 Linux
/dev/sda8 179 121601 975330216 83 Linux
Re: Hi !! Firmware upgrade from 5.1 to 15
Posted:
Sun Sep 29, 2013 5:35 pm
by Jocko
So your partition table is ok.
there are two ways to upgrade your NAS :
-upgrade manually step by step 5.1 ->6.1; 6.1->7.0; 7.0->8.0; 8.0->9.0 and then install version 10.1 with the menu and if all is right install the last version
-dismount the hard disk out of the lacie casing and connect it to a PC running Linux and copy manually the firmware image version 10.1 and its kernel and then install the last version with the menu.
What do you prefer ?
Re: Hi !! Firmware upgrade from 5.1 to 15
Posted:
Sun Sep 29, 2013 5:38 pm
by almo65
My pc running windows 7 i prefer upgrade manually step by step
Re: Hi !! Firmware upgrade from 5.1 to 15
Posted:
Sun Sep 29, 2013 5:40 pm
by almo65
Thank you for your patience :)
Re: Hi !! Firmware upgrade from 5.1 to 15
Posted:
Sun Sep 29, 2013 5:45 pm
by Jocko
Ok I go to post the upgrade scripts
Re: Hi !! Firmware upgrade from 5.1 to 15
Posted:
Sun Sep 29, 2013 5:52 pm
by Jocko
Ok first step install version 6.1
So unzip twice the attached file in the share 'fvdw'. If you don't have yet this share, create it before.
Read the instruction in the Lacie upgrade to fvdw6-1 instruction.txt
At the step (f), you must use lc-upgd-fvdw5-1-to-6-1.sh.