Hi !! Firmware upgrade from 5.1 to 15

Post any question, feedback you have regarding the Lacie Network Space vs 1 in this forum

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby Jocko » Tue Oct 01, 2013 8:07 pm

@fvdw,
I don't send yet this update. (and it's why I wanted that almo65 installs version 10.1 before 15.0 : no mixing potential issues...)

Currently, the installed version should be 10.1 for nwsp1 after using the firmware Lacie menu of the version 9.0.
So if almo65 succeeded to do this step, platform file should contain nwsp1 instead of phn :scratch

@almo65
could you post the filename of the firmware image that you used to install version 10.1 ?
User avatar
Jocko
Site Admin - expert
 
Posts: 7170
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby fvdw » Tue Oct 01, 2013 8:19 pm

almo65 wrote:Allright !! Now firmware version phn fvdw-sl 10.1 !! :hail


:lmao
User avatar
fvdw
Site Admin - expert
 
Posts: 8472
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby Jocko » Tue Oct 01, 2013 8:21 pm

Ahah! Seems that there is an error on the file...

So wait the almo65's answers
User avatar
Jocko
Site Admin - expert
 
Posts: 7170
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby Jocko » Tue Oct 01, 2013 8:33 pm

:tapfoot Zzzzzzzzzzzzzzzzzz.. zzzzzzzzzzzzzzzz...
User avatar
Jocko
Site Admin - expert
 
Posts: 7170
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby almo65 » Tue Oct 01, 2013 9:11 pm

Code: Select all
root@nastest:/ # ls /lacie-boot
sda1boot

root@nastest:/ # cat /boot.log
start boot log
initializing date
Wed Nov 16 12:00:00 GMT+1 2011
booting using sda1 root file system...
run udevstart to update dev nodes when necessary
inserting kernel modules:
make dev node for buttons...
start buttons control daemon
buttons-spd daemon started
start fan control daemon
fan-spd T daemon started
configure loopback netwerk interface
export reset gpio pin
starting php based setup routines step 1


 * Initial Orion-Nas XML configuration file...           [ OK ]
 * Configuring Disks...                                  [ OK ]
 * Configuring System Users...
Warning: fopen(/etc/rootpasswd): failed to open stream: No such file or directory in /etc/finc/userfunc_users_commit.finc on line 38
                                 [ OK ]
 * Starting mount of volumes...
   - Mounting volume Default:
                                                         [ OK ]
 * Finishing mount of volumes...                         [ OK ]
 * Generating Hosts File...                              [ OK ]
 * Configuring System Hostname...                        [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Configuring LAN interface...                          [ OK ]
 * Starting udevd...                                     [ OK ]
 * Starting web server...                                [ OK ]
 * Initializing Timezone...                              [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Starting syncawayd...                                 [ OK ]
 * Marvell mediaserver not started...,QOSd... starting php based setup routines step 2
 * Starting dropbear... cmd : dropbear -p 22 -r '/rw_fs/etc/dropbear/dropbear_rsa_host_key'                              [ OK ]


starting php based setup routines step banner


*** fvdw-sl NAS firmware
    This is fvdw-sl version: fvdw-sl 10.1
    built on: November 15 2011

    LAN IP address: 192.168.1.225 (static)

    Port configuration:

    LAN   -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move smbd en nmbd db files to ramdisk to enable disk spin down
rcS finished
root@nastest:/ #


root@nastest:/ # cat /etc/fvdwversion
fvdw-sl 10.1
root@nastest:/ #
almo65
 
Posts: 24
Joined: Sun Sep 29, 2013 3:40 pm

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby Jocko » Tue Oct 01, 2013 9:14 pm

@almo65
could you post the filename of the firmware image that you used to install version 10.1 ?

And about the filename
User avatar
Jocko
Site Admin - expert
 
Posts: 7170
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby almo65 » Tue Oct 01, 2013 9:14 pm

...sorry for delay :whistle
almo65
 
Posts: 24
Joined: Sun Sep 29, 2013 3:40 pm

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby almo65 » Tue Oct 01, 2013 9:16 pm

fvdw-sl-10-1-phn-19nov2011-51lower
almo65
 
Posts: 24
Joined: Sun Sep 29, 2013 3:40 pm

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby Jocko » Tue Oct 01, 2013 9:19 pm

Ok you used a wrong firmware image :whistle (for Philips SPD8020 NAS)

You must install again the firmware image version 10.1 for nwsp1. Download the file from viewtopic.php?f=7&t=235#p1493.

Before installing it do in Putty :
Code: Select all
rm /lacie-boot/sda1boot
.
Reboot the NAS to downgrade the firmware version to 9.0
Close all browser window and open again your browser (it must ask you authenticate)

So go to the Lacie firmware upgrade menu and upload the firmware image (bin file)

And post (after the last reboot)
Code: Select all
cat /boot.log
and
Code: Select all
cat /etc/platform
User avatar
Jocko
Site Admin - expert
 
Posts: 7170
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: Hi !! Firmware upgrade from 5.1 to 15

Postby almo65 » Tue Oct 01, 2013 9:41 pm

Firmware upgrade step 2 started...
Firmware upgrade failed, upgrade process aborted, reason:
fw upgrade found platform file firmware package differs from that on running system


login as: root
root@192.168.1.225's password:
/ # cat /boot.log
start boot log
booting using root file system...
run udevstart to update dev nodes when necessary
inserting kernel modules:
make dev node for buttons...
start buttons control daemon
buttons-spd daemon started
start fan control daemon
fan-spd T daemon started
configure loopback netwerk interface
export reset gpio pin
starting php based setup routines step 1


* Initial Orion-Nas XML configuration file... [ OK ]
* Configuring Disks... [ OK ]
* Configuring System Users...
Warning: fopen(/etc/rootpasswd): failed to open stream: No such file or directory in /etc/finc/userfunc_users_commit.finc on line 38
[ OK ]
* Starting mount of volumes...
- Mounting volume Default:
[ OK ]
* Finishing mount of volumes... [ OK ]
* Generating Hosts File... [ OK ]
* Configuring System Hostname... [ OK ]
* Configuring Samba... [ OK ]
* Configuring LAN interface... [ OK ]
* Starting udevd... [ OK ]
* Starting web server... [ OK ]
* Initializing Timezone... [ OK ]
* Configuring Samba... [ OK ]
* Starting syncawayd... [ OK ]
* Marvell mediaserver not started...,QOSd... move random to random-blocks and link /dev/random to /dev/urandom
starting php based setup routines step 2
* Starting dropbear... cmd : dropbear -r '/rw_fs/etc/dropbear/dropbear_rsa_host_key' [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
This is fvdw-sl version: fvdw-sl 9.0
built on: August 18 2011

LAN IP address: 192.168.1.225 (static)

Port configuration:

LAN -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
starting NFS server...
move smbd en nmbd db files to ramdisk to enable disk spin down
rcS finished
/ # cat /etc/platform
phn
/ #
almo65
 
Posts: 24
Joined: Sun Sep 29, 2013 3:40 pm

PreviousNext

Return to Lacie Network Space vs1

Who is online

Users browsing this forum: No registered users and 1 guest