hi people,
I managed to install Debian/lenny in my Lacie Network Space vs1 ,
(alongside the original Lacie O.S.)
I documented all the procedure in
http://mennucc1.debian.net/lacie_network_space/
(I also document how to access the serial console)
I am quite satisfied but I have some things yet TODO, mainly
1) I am still using the old 2.6.12.6-arm1 kernel I would like to use a newer one.
2) Debian/lenny does not shutdown and power off properly, and ignores the power switch.
Since the section 'Firmware and Howto guides downloads' is accessible only to registered users, I did not find it by google, up to now: so now I will look at how you solved all the above.... In any case , any hint is welcomed