Reset to fvdw default

[rounders13]

Hi guys,

Thank you for the good work.

I just un-dusted my old vs1. It had 10-1 on it and behave very erratically. I tried flashing it with 14-1 but at best it gives me error "cannot rename the file" or something or simply crash and I have to reboot it 3 times just to get the http console or to ssh on it. Actually even when I manage to get it working and let it be with 10-1, it stills crash and I still have a hard time to regain access...

Long story short, I would like to reset it to default or the best would be to find a way to put 14-1. But as long as it works stable as a NAS and DLNA server I would be happy :-)

Any suggestion?

Big thanks in advance,

[fvdw]

My suggestion would be to repeat the first time install procedure.

ps the fact that the firmware doesn't run stable is not normal, this device might have a hardware problem if it still is instable after a new install

[rounders13]

You're the man thanks a lot for your quick reply.
Will give it a try.

[rounders13]

I'm now able to SSH in it but it rejects my password. Tried with my actual pwd and giveit2me with no luck.
Anyway I can get out of this loop?

I apologize if that was already answered somewhere in the forum.

Thank you fvdw

[Jocko]

Nothing to worry...

yes, you can already find this information in this post : http://www.plugout.net/viewtopic.php?f=11&t=1000&p=5846&hilit=giveit2me#p5846

Remember : after upgrading the firmware, the custom password is resetting and you must use "giveit2me"

[rounders13]

Thanks so much Jocko I will follow the post you referred to.