Problems upgrading to V17 (part2)

Re: Problems upgrading to V17 (part2)

Postby peetn » Sun Mar 22, 2020 9:22 am

The manual upgrade to 17 worked!

It then rebooted and now I'm on 17-0.
Thanks a lot for all of your time
You are geniuses! :applause

Next, I also already updated the roll-up patch (patch 11) on 17-0.
That was also successful.

Then I tried to upgrade to the latest version (18.2) via the automatic updates as listed.
That also succeeded :)

Thanks again!
You do not have the required permissions to view the files attached to this post.
peetn
Donator VIP
Donator VIP
 
Posts: 24
Joined: Wed Feb 06, 2013 5:26 pm

Re: Problems upgrading to V17 (part2)

Postby Jocko » Sun Mar 22, 2020 9:27 am

Nice to heard everything is restored :thumbup

However I advice you to run a full smart check and see your disk attributes table (eg. reallocated sectors)
Jocko
Site Admin - expert
 
Posts: 11367
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: Problems upgrading to V17 (part2)

Postby peetn » Sun Mar 22, 2020 3:25 pm

Hello,

Full (long) test results

Code: Select all
=== START OF READ SMART DATA SECTION ===
Short self-test routine
Extended self-test routine
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     26301         -
# 2  Extended offline    Completed without error       00%     26155         -
# 3  Short offline       Completed without error       00%     26150         -


All SMART info screen:
Code: Select all
smartctl 6.3 2014-07-26 r3976 [armv5tel-linux-2.6.39.4] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD20EFRX-68EUZN0
Serial Number:    WD-WCC4M7RVS6TD
LU WWN Device Id: 5 0014ee 20def9519
Firmware Version: 82.00A82
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun Mar 22 16:25:22 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (26880) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 271) minutes.
Conveyance self-test routine
recommended polling time:     (   5) minutes.
SCT capabilities:           (0x703d)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   198   172   021    Pre-fail  Always       -       3100
  4 Start_Stop_Count        0x0032   094   094   000    Old_age   Always       -       6992
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   064   064   000    Old_age   Always       -       26301
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       37
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       28
193 Load_Cycle_Count        0x0032   194   194   000    Old_age   Always       -       18614
194 Temperature_Celsius     0x0022   104   100   000    Old_age   Always       -       43
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     26301         -
# 2  Extended offline    Completed without error       00%     26155         -
# 3  Short offline       Completed without error       00%     26150         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
peetn
Donator VIP
Donator VIP
 
Posts: 24
Joined: Wed Feb 06, 2013 5:26 pm

Re: Problems upgrading to V17 (part2)

Postby Jocko » Sun Mar 22, 2020 7:08 pm

:thumbup
Everything seems ok. Your disk is healthy

And thank you so much for your donation
Jocko
Site Admin - expert
 
Posts: 11367
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Previous

Return to Philips SPD8020

Who is online

Users browsing this forum: No registered users and 1 guest

cron