SPD8020 stuck...

Post any question, feedback you have regarding the Philips SPD8020 in this forum

SPD8020 stuck...

Postby beertje23 » Mon Apr 27, 2015 3:43 pm

I was updating both my SPD's last night, and 1 got stuck at step 2.

Won't start now and will blink the blue Led so once and a while.

Suggestions??


Thx
User avatar
beertje23
donator VIP
donator VIP
 
Posts: 38
Joined: Fri Oct 28, 2011 5:44 pm
Location: Utereg m'n stoadsie, Hollanda

Re: SPD8020 stuck...

Postby fvdw » Mon Apr 27, 2015 7:23 pm

was thre an error message at the end of step 2, and what did you do after step 2 with the one that got stuck ?
User avatar
fvdw
Site Admin - expert
 
Posts: 8472
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands

Re: SPD8020 stuck...

Postby beertje23 » Mon Apr 27, 2015 8:40 pm

I did not noticed any error message.. been waiting for almost an hour, and then i unplugged the power plug behind and replugged it. It rebooted and I have rebooted it a couple of times after. Nothing really, it showed nothing in the browser. It wouldn´t load. Some times a little blue flash from the LED.

Something changed tho, ive noticed at a later state. Of course I tried it both ways, in Windows 7 and Linux (Kubuntu).

In Win7 it showed the Networkmaps from the SPD shared folders as not connected, and wouldn´t load by clicking on it. And for the Browser still same thing.

With Kubuntu, also a no show in the browser. But I noticed that in Krusader I had full access to my SPD folders. All of them. (maybe because I do not samba, but NFS?)
ssh works too.
User avatar
beertje23
donator VIP
donator VIP
 
Posts: 38
Joined: Fri Oct 28, 2011 5:44 pm
Location: Utereg m'n stoadsie, Hollanda

Re: SPD8020 stuck...

Postby fvdw » Mon Apr 27, 2015 9:04 pm

if ssh works we can analyse what is going on and if we can solve it revert back to the previous version

To start to analyse this problem, connect with ssh and give command
Code: Select all
cat boot.log

and post output here
User avatar
fvdw
Site Admin - expert
 
Posts: 8472
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands

Re: SPD8020 stuck...

Postby beertje23 » Mon Apr 27, 2015 9:51 pm

start boot log
detect and set platform
phn
uImage-26394-phn-20
phn
update dev nodes
booting using root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
device = phn
source = buttons-phn
buttons-spd daemon started
initializing date
Wed Nov 16 12:00:00 CET 2011
create temporary passwd file
run udevstart to update dev nodes when necessary
inserting kernel modules:
configure loopback netwerk interface
setting reboot and standby
phn
rebootd-phn
phn
standbyd-phn
start fan
fan-spd T daemon started
phn adapting motion.conf file
export reset gpio pin
starting php based setup routines step 1

* Found XML database configuration file... [ OK ]
* Updating Disks database... [ OK ]
* Starting mount of volumes...
- Mounting volume Default: [ OK ]
* Finishing mount of volumes... [ OK ]
* Starting udevd... [ OK ]
* Generating Hosts File... [ OK ]
* Configuring System Hostname... [ OK ]
* Configuring LAN interface... [ OK ]
* Initializing Timezone... [ OK ]
* Starting web server... [ OK ]
* Configuring Disks... [ OK ]
* Configuring Samba... [ OK ]
* Configuring System Users...
Root password: use custom password
Set users, linux and samba accounts [ OK ]
* Starting syncawayd... [ OK ]
* Starting Fvdw-sl Discovery Daemon... [ OK ]
start rpcbind service
starting php based setup routines step 2
* Starting dropbear... [ OK ]
* Kill temporary dropbear... [ OK ]
starting php based setup routines step 3
* Starting NFS Server... [ OK ]
* Starting daemon update Hosts File... [ OK ]
* Starting Disk Temperature Guard... [ OK ]
* Starting mount of remote shares...
* Finishing mount shares... [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
This is fvdw-sl version: fvdw-sl 15.3 patched
built on: May 30 2014

LAN IP address: 192.168.1.60 (static)

Port configuration:

LAN -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move smbd en nmbd db files to ramdisk to enable disk spin down
else loop1 finished
rcS finished
root@SPD8020-1:/ #
User avatar
beertje23
donator VIP
donator VIP
 
Posts: 38
Joined: Fri Oct 28, 2011 5:44 pm
Location: Utereg m'n stoadsie, Hollanda

Re: SPD8020 stuck...

Postby beertje23 » Mon Apr 27, 2015 9:52 pm

Truste, bis morgen.. :D
User avatar
beertje23
donator VIP
donator VIP
 
Posts: 38
Joined: Fri Oct 28, 2011 5:44 pm
Location: Utereg m'n stoadsie, Hollanda

Re: SPD8020 stuck...

Postby beertje23 » Tue Apr 28, 2015 12:12 pm

Weirdly enough it seemed to work again and I could do the upgrade..

Thx anyways
User avatar
beertje23
donator VIP
donator VIP
 
Posts: 38
Joined: Fri Oct 28, 2011 5:44 pm
Location: Utereg m'n stoadsie, Hollanda


Return to Philips SPD8020

Who is online

Users browsing this forum: No registered users and 1 guest