Devices nwsp2 and 2big2
The webcam Logitech C210 (within the list of supported uvc devices) is recognized:
- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=046d ProdID=0819 Rev=00.10
S: SerialNumber=9CC5DF90
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I: If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
With "start server" I got the error message "Fail: start command failed"
The share "motion-webcam" folder was created without any access rights.
It contains 2 files:
motion.confe
motion.conf
The content of motion.conf:
- Code: Select all
daemon on
setup_mode off
logfile /share/1100/motion-webcam/motion.log
log_level 6
log_type all
videodevice /dev/video0
v4l2_palette 17
; tunerdevice /dev/tuner0
input -1
norm 0
frequency 0
rotate 0
width 320
height 240
framerate 2
minimum_frame_time 0
; netcam_url value
; netcam_userpass value
netcam_keepalive off
; netcam_proxy value
netcam_tolerant_check off
auto_brightness off
brightness 0
contrast 0
saturation 0
hue 0
roundrobin_frames 1
roundrobin_skip 1
switchfilter off
threshold 1500
threshold_tune off
noise_level 32
noise_tune on
despeckle_filter EedDl
; area_detect value
; mask_file value
smart_mask_speed 0
lightswitch 0
minimum_motion_frames 1
pre_capture 0
post_capture 0
event_gap 60
max_movie_time 1800
emulate_motion off
output_pictures on
output_debug_pictures off
quality 75
picture_type jpeg
ffmpeg_output_movies on
ffmpeg_output_debug_movies off
ffmpeg_timelapse 0
ffmpeg_timelapse_mode daily
ffmpeg_bps 500000
ffmpeg_variable_bitrate 0
ffmpeg_video_codec mpeg4
ffmpeg_deinterlace off
sdl_threadnr 0
use_extpipe off
;extpipe mencoder -demuxer rawvideo -rawvideo w=320:h=240:i420 -ovc x264 -x264encopts bframes=4:frameref=1:subq=1:scenecut=-1:nob_adapt:threads=1:keyint=1000:8x8dct:vbv_bufsize=4000:crf=24:partitions=i8x8,i4x4:vbv_maxrate=800:no-chroma-me -vf denoise3d=16:12:48:4,pp=lb -of avi -o %f.avi - -fps %fps
snapshot_interval 0
locate_motion_style box
text_right %Y-%m-%d\n%T-%q
; text_left CAMERA %t
text_changes off
text_event %Y%m%d%H%M%S
text_double off
;exif_text %i%J/%K%L
target_dir /share/1100/motion-webcam/cam1
snapshot_filename %v-%Y%m%d%H%M%S-snapshot
picture_filename %v-%Y%m%d%H%M%S-%q
movie_filename %v-%Y%m%d%H%M%S
timelapse_filename %Y%m%d-timelapse
ipv6_enabled off
stream_port 8090
stream_quality 100
stream_motion off
stream_maxrate 1
stream_localhost off
stream_limit 0
stream_auth_method 0
; stream_authentication username:password
webcontrol_port 8091
webcontrol_localhost off
webcontrol_html_output on
; webcontrol_authentication username:password
track_type 0
track_auto off
;track_port /dev/ttyS0
;track_motorx 0
;track_motorx_reverse 0
;track_motory 1
;track_motory_reverse 0
;track_maxx 200
;track_minx 50
;track_maxy 200
;track_miny 50
;track_homex 128
;track_homey 128
track_iomojo_id 0
track_step_angle_x 10
track_step_angle_y 10
track_move_wait 10
track_speed 255
track_stepsize 40
quiet on
; on_event_start value
; on_event_end value
; on_picture_save value
; on_motion_detected value
; on_area_detected value
; on_movie_start value
; on_movie_end value
; on_camera_lost value
; sql_log_picture on
; sql_log_snapshot on
; sql_log_movie off
; sql_log_timelapse off
; sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
; database_type value
; database_dbname value
; database_host value
; database_user value
; database_password value
; database_port value
; sqlite3_db value
; video_pipe value
; motion_video_pipe value
; thread /usr/local/etc/thread1.conf
; thread /usr/local/etc/thread2.conf
; thread /usr/local/etc/thread3.conf
; thread /usr/local/etc/thread4.conf
