Help with webcam for motion server

[AceCuba]

I got a webcam that i want to use with otion is a logitech QuickCam Communicate MP/S5500 .

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=046d ProdID=09a1 Rev=00.08
S: SerialNumber=A8455510
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=(none)

can anyone gelpme to find the driver for this os

[AceCuba]

otion server is working fine but unable to get video device /dev/video0

[fvdw]

the uvc driver is incorporated in the kernel.
The video node should be created automatic.

But if it is not present try these commands and then attache again your webcam

Code: Select all

mknod /dev/video0 c 81 0
chmod 666 /dev/video0

[AceCuba]

done that reboot the nas , same result . when i was using this webcam in openwrt the green led come up . but if i conect the webcam to the nas no led . so can be the driver not working in the nas :scratch :scratch

[AceCuba]

Driver=(none)

[AceCuba]

test this other webcam a microsoft lifecamvx-1000 webcam in this case , same result

Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=045e ProdID=00f7 Rev=01.01
S: Product=USB camera
C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=(none)

[fvdw]

For that webcam, it is a sonixj, you can find the needed driver here
https://plugout.net/viewtopic.php?f=26&t=3718&p=38351#p38350

[AceCuba]

nothing same result

[Jocko]

Hi

Amazing and then I do not think it is a driver issue.

What url do you use to watch the cam stream ? Maybe there is an issue with the link "http://nasname/.webcam/stream_motion.php". You can try to use directly the stream flux from the short url "http://nasname:8090"

Also it may have issue with some web browsers; For example, the link "http://nasname:8090" does not work with Internet Explorer according with its version. With Chrome or Firefox there is no issue

[AceCuba]

:scratch