FVDW-SL on a Seagate Personal Cloud - additional steps

[Jocko]

Hi

Thank you with yours answer.

So disable inotify support fixes your issue. As inotify is a kernel feature maybe there is an problem with your platform type :scratch

Just an additional question :
if you enable notify option with a value 60, when you add a new media file or remove one, do you notice a change on the presentation page when you reload it after waiting the notify interval ?

As TonyP posted no feedback, we did not work more this project. :tapfoot
So a new job to do :whistle
In few weeks, I will post a package to make a full support for Seagate personal cloud

Very good news, if I can help, I'm willing.

I read the user's manual to detect the main features and if I understand you have only one USB port no other ports (esata,... )?

For building the patch, can you post this output:

Code: Select all

dmesg
lsscsi -t      (<----------------better if you have a usb drive or stick plugged)

ls -l /sys/class/leds
ls -l /sys/class/leds/*/

according with the last output maybe I will ask additional information.

[m1m1sm1t1c0]

if you enable notify option with a value 60, when you add a new media file or remove one, do you notice a change on the presentation page when you reload it after waiting the notify interval ?

I'll tell you tomorrow, try tonight at home.

I read the user's manual to detect the main features and if I understand you have only one USB port no other ports (esata,... )?

One USB port, by blue color connector is USB 3.0.
https://imgur.com/a/vNhn2wv
Other USB black connector next to the power and lan.
https://imgur.com/a/o3Fxv8M

For building the patch, can you post this output:

Code: Select all

dmesg
lsscsi -t      (<----------------better if you have a usb drive or stick plugged)

ls -l /sys/class/leds
ls -l /sys/class/leds/*/

Code: Select all

login as: root
root@10.113.1.4's password:
root@ftp:/ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #3 Mon Jun 4 22:11:11 CEST 2018
[    0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: Seagate Personal Cloud (Cumulus, SRN21C)
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0881a4c, node_mem_map dfb7a000
[    0.000000]   Normal zone: 1152 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129920
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 510036K/524288K available (6123K kernel code, 291K rwdata, 2040K rodata, 228K init, 416K bss, 14252K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0800fbc   (8164 kB)
[    0.000000]       .init : 0xc0801000 - 0xc083a000   ( 228 kB)
[    0.000000]       .data : 0xc083a000 - 0xc0882f60   ( 292 kB)
[    0.000000]        .bss : 0xc0882f60 - 0xc08eb108   ( 417 kB)
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L2C: DT/platform modifies aux control register: 0x12086302 -> 0x1a086302
[    0.000000] Aurora cache controller enabled, 4 ways, 256 kB
[    0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302
[    0.000000] Switching to timer-based delay loop, resolution 48ns
[    0.000007] sched_clock: 32 bits at 20MHz, resolution 48ns, wraps every 103356786663ns
[    0.000023] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 91987540234 ns
[    0.000293] Console: colour dummy device 80x30
[    0.000310] Calibrating delay loop (skipped), value calculated using timer frequency.. 41.55 BogoMIPS (lpj=207773)
[    0.000323] pid_max: default: 32768 minimum: 301
[    0.000452] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000461] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001050] CPU: Testing write buffer coherency: ok
[    0.001279] Setting up static identity map for 0x8200 - 0x8258
[    0.001578] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1
[    0.001708] mvebu-pmsu: Initializing Power Management Service Unit
[    0.005471] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
[    0.005703] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.005805] xor: measuring software checksum speed
[    0.100057]    arm4regs  :   919.600 MB/sec
[    0.200056]    8regs     :   772.400 MB/sec
[    0.300057]    32regs    :   880.400 MB/sec
[    0.300065] xor: using function: arm4regs (919.600 MB/sec)
[    0.300090] pinctrl core: initialized pinctrl subsystem
[    0.300786] NET: Registered protocol family 16
[    0.301278] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.301887] cpuidle: using governor ladder
[    0.306002] sram soc:sa-sram: found no memory resource
[    0.306022] sram: probe of soc:sa-sram failed with error -22
[    0.306554] No ATAGs?
[    0.306568] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.306690] mvebu-pmsu: CPU idle is currently broken: disabling
[    0.480347] raid6: int32x1  gen()   142 MB/s
[    0.650202] raid6: int32x1  xor()   136 MB/s
[    0.820114] raid6: int32x2  gen()   213 MB/s
[    0.990082] raid6: int32x2  xor()   155 MB/s
[    1.160084] raid6: int32x4  gen()   179 MB/s
[    1.330091] raid6: int32x4  xor()   140 MB/s
[    1.500282] raid6: int32x8  gen()   175 MB/s
[    1.670129] raid6: int32x8  xor()   116 MB/s
[    1.670137] raid6: using algorithm int32x2 gen() 213 MB/s
[    1.670142] raid6: .... xor() 155 MB/s, rmw enabled
[    1.670148] raid6: using intx1 recovery algorithm
[    1.670702] SCSI subsystem initialized
[    1.670872] libata version 3.00 loaded.
[    1.672408] clocksource: Switched to clocksource armada_370_xp_clocksource
[    1.672699] FS-Cache: Loaded
[    1.678459] NET: Registered protocol family 2
[    1.678963] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    1.679000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    1.679037] TCP: Hash tables configured (established 4096 bind 4096)
[    1.679104] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.679118] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.679232] NET: Registered protocol family 1
[    1.679504] RPC: Registered named UNIX socket transport module.
[    1.679512] RPC: Registered udp transport module.
[    1.679518] RPC: Registered tcp transport module.
[    1.679523] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.679541] PCI: CLS 0 bytes, default 64
[    1.679789] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    1.680693] futex hash table entries: 256 (order: -1, 3072 bytes)
[    1.681291] workingset: timestamp_bits=13 max_order=17 bucket_order=4
[    1.681643] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.681892] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.682258] ntfs: driver 2.1.32 [Flags: R/W].
[    1.682291] fuse init (API version 7.24)
[    1.682570] JFS: nTxBlock = 3984, nTxLock = 31877
[    1.687884] async_tx: api initialized (async)
[    1.687979] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.687996] io scheduler noop registered
[    1.688010] io scheduler deadline registered
[    1.688039] io scheduler cfq registered (default)
[    1.688686] armada-370-pinctrl f1018000.pin-ctrl: registered pinctrl driver
[    1.689457] irq: Cannot allocate irq_descs @ IRQ39, assuming pre-allocated
[    1.689841] irq: Cannot allocate irq_descs @ IRQ71, assuming pre-allocated
[    1.690115] irq: Cannot allocate irq_descs @ IRQ103, assuming pre-allocated
[    1.690778] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[    1.690794] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    1.690805] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff]
[    1.690815] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.690845] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400
[    1.691065] PCI: bus0: Fast back to back transfers disabled
[    1.691077] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.691220] pci 0000:01:00.0: [1b21:1142] type 00 class 0x0c0330
[    1.691252] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40007fff 64bit]
[    1.691360] pci 0000:01:00.0: PME# supported from D3hot
[    1.691567] PCI: bus1: Fast back to back transfers disabled
[    1.691580] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.691647] pci 0000:00:01.0: BAR 8: assigned [mem 0xf8000000-0xf80fffff]
[    1.691662] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf8007fff 64bit]
[    1.691680] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.691692] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xf80fffff]
[    1.691732] pci 0000:00:01.0: enabling device (0140 -> 0142)
[    1.691926] mv_xor f1060800.xor: Marvell shared XOR driver
[    1.733164] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.734190] mv_xor f1060900.xor: Marvell shared XOR driver
[    1.773137] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.774304] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.775520] console [ttyS0] disabled
[    1.795650] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 20, base_baud = 12500000) is a 16550A
[    2.477882] console [ttyS0] enabled
[    2.491747] brd: module loaded
[    2.499951] loop: module loaded
[    2.503619] sata_mv f10a0000.sata: version 1.28
[    2.503776] sata_mv f10a0000.sata: slots 32 ports 1
[    2.509646] scsi host0: sata_mv
[    2.513073] ata1: SATA max UDMA/133 irq 28
[    2.518683] m25p80 spi0.0: mx25l8005 (1024 Kbytes)
[    2.523541] 1 ofpart partitions found on MTD device spi0.0
[    2.529052] Creating 1 MTD partitions on "spi0.0":
[    2.533882] 0x000000000000-0x000000100000 : "u-boot"
[    2.540487] libphy: Fixed MDIO Bus: probed
[    2.544639] tun: Universal TUN/TAP device driver, 1.6
[    2.549712] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.556040] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    2.564136] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    2.573215] libphy: orion_mdio_bus: probed
[    2.579258] mvneta f1074000.ethernet eth0: Using hardware mac address 00:10:75:58:85:a8
[    2.587425] PPP generic driver version 2.4.2
[    2.591844] PPP Deflate Compression module registered
[    2.596951] PPP MPPE Compression module registered
[    2.601769] NET: Registered protocol family 24
[    2.606663] aoe: cannot create debugfs directory
[    2.611440] aoe: AoE v85 initialised.
[    2.615507] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
[    2.633461] md: linear personality registered for level -1
[    2.638981] md: raid0 personality registered for level 0
[    2.644336] md: raid1 personality registered for level 1
[    2.649677] md: raid10 personality registered for level 10
[    2.655436] md: raid6 personality registered for level 6
[    2.660774] md: raid5 personality registered for level 5
[    2.666125] md: raid4 personality registered for level 4
[    2.671606] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.680315] device-mapper: multipath: version 1.11.0 loaded
[    2.685938] device-mapper: multipath round-robin: version 1.1.0 loaded
[    2.692512] device-mapper: multipath queue-length: version 0.2.0 loaded
[    2.699163] device-mapper: multipath service-time: version 0.3.0 loaded
[    2.705870] device-mapper: dm-log-userspace: version 1.3.0 loaded
[    2.711998] device-mapper: raid: Loading target version 1.7.0
[    2.718209] ledtrig-cpu: registered to indicate activity on CPUs
[    2.724525] marvell-cesa: probe of f1090000.crypto failed with error -22
[    2.731384] hidraw: raw HID events driver (C) Jiri Kosina
[    2.737118] Netfilter messages via NETLINK v0.30.
[    2.741857] nfnl_acct: registering with nfnetlink.
[    2.746714] nf_conntrack version 0.5.0 (7969 buckets, 31876 max)
[    2.753383] ipip: IPv4 over IPv4 tunneling driver
[    2.758850] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.764398] NET: Registered protocol family 10
[    2.769781] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.775405] sit: IPv6 over IPv4 tunneling driver
[    2.780644] NET: Registered protocol family 17
[    2.785173] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.797872] Bridge firewalling registered
[    2.801908] NET: Registered protocol family 5
[    2.806422] Key type dns_resolver registered
[    2.811181] registered taskstats version 1
[    2.816284] console [netcon0] enabled
[    2.819965] netconsole: network logging started
[    2.825029] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    2.831959] rtc-mv f1010300.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.032431] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[    3.043230] ata1.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
[    3.049445] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    3.062944] ata1.00: configured for UDMA/133
[    3.067600] scsi 0:0:0:0: Direct-Access     ATA      ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
[    3.076706] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.084426] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.089881] sd 0:0:0:0: [sda] Write Protect is off
[    3.094712] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.094800] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.162871]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[    3.170051] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.174773] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[    3.218616] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
[    3.235668] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[    3.242593] EXT4-fs (sda7): write access will be enabled during recovery
[    4.012863] EXT4-fs (sda7): recovery complete
[    4.092470] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    4.100201] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
[    4.107190] Freeing unused kernel memory: 228K (c0801000 - c083a000)
[    4.113582] This architecture does not have kernel memory protection.
[    4.402489] EXT4-fs (sda7): re-mounted. Opts: (null)
[    5.142118] usbcore: registered new interface driver usbfs
[    5.147732] usbcore: registered new interface driver hub
[    5.153140] usbcore: registered new device driver usb
[    5.160134] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.167295] ehci-orion: EHCI orion driver
[    5.171488] orion-ehci f1050000.usb: EHCI Host Controller
[    5.176967] orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1
[    5.184691] orion-ehci f1050000.usb: irq 26, io mem 0xf1050000
[    5.202421] orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00
[    5.208503] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.215339] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.222604] usb usb1: Product: EHCI Host Controller
[    5.227506] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd
[    5.232849] usb usb1: SerialNumber: f1050000.usb
[    5.237983] hub 1-0:1.0: USB hub found
[    5.241778] hub 1-0:1.0: 1 port detected
[    5.259012] usbcore: registered new interface driver usb-storage
[    5.276104] usbcore: registered new interface driver usblp
[    5.306793] Loading iSCSI transport class v2.0-870.
[    5.316119] iscsi: registered transport (tcp)
[    5.646503] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[    5.872698] EXT4-fs (sda5): warning: checktime reached, running e2fsck is recommended
[    5.927797] EXT4-fs (sda5): 2 orphan inodes deleted
[    5.932944] EXT4-fs (sda5): recovery complete
[    6.132475] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.244201] random: mkswap urandom read with 83 bits of entropy available
[    6.320806] Adding 524284k swap on /dev/sda3.  Priority:-1 extents:1 across:524284k
[   12.152475] random: nonblocking pool is initialized
[   18.128727] udevd (316): /proc/316/oom_adj is deprecated, please use /proc/316/oom_score_adj instead.
[   18.138112] udev: starting version 130
[   18.807006] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   18.812288] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[   18.880206] xhci_hcd 0000:01:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
[   19.239985] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   19.246843] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.254109] usb usb2: Product: xHCI Host Controller
[   19.259011] usb usb2: Manufacturer: Linux 4.6.6 xhci-hcd
[   19.264356] usb usb2: SerialNumber: 0000:01:00.0
[   19.270161] hub 2-0:1.0: USB hub found
[   19.274483] hub 2-0:1.0: 2 ports detected
[   19.278977] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   19.284270] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
[   19.291841] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[   19.300077] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[   19.306911] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.314176] usb usb3: Product: xHCI Host Controller
[   19.319077] usb usb3: Manufacturer: Linux 4.6.6 xhci-hcd
[   19.324421] usb usb3: SerialNumber: 0000:01:00.0
[   19.330162] hub 3-0:1.0: USB hub found
[   19.334482] hub 3-0:1.0: 2 ports detected
[   26.698407] EXT4-fs (sda8): warning: checktime reached, running e2fsck is recommended
[   26.983605] EXT4-fs (sda8): recovery complete
[   27.022487] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl,nodelalloc
[   28.342632] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   36.222938] capability: warning: `proftpd' uses 32-bit capabilities (legacy support in use)
[   58.343181] mvneta f1074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   58.351079] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   97.595839] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[774178.915563] mvneta f1074000.ethernet eth0: Link is Down
[774180.912424] mvneta f1074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[774257.479538] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[774257.680049] usb 2-1: New USB device found, idVendor=0781, idProduct=5406
[774257.686877] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[774257.694148] usb 2-1: Product: U3 Cruzer Micro
[774257.698613] usb 2-1: Manufacturer: SanDisk
[774257.702825] usb 2-1: SerialNumber: 44567202EE9160BF
[774257.709764] usb-storage 2-1:1.0: USB Mass Storage device detected
[774257.729790] scsi host1: usb-storage 2-1:1.0
[774258.730043] scsi 1:0:0:0: Direct-Access     SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0 CCS
[774258.744625] sd 1:0:0:0: [sdb] Attached SCSI removable disk
root@ftp:/ # lsscsi -t
[0:0:0:0]    disk    sata:                           /dev/sda
[1:0:0:0]    disk    usb: 2-1:1.0                    /dev/sdb
root@ftp:/ # ls -l /sys/class/leds
total 0
lrwxrwxrwx  1 root root 0 1999-12-31 19:00 cumulus:red:sata0 -> ../../devices/platform/gpio-leds/leds/cumulus:red:sata0
root@ftp:/ # ls -l /sys/class/leds/*/
total 0
-rw-r--r--  1 root root 4096 2019-01-30 13:59 brightness
lrwxrwxrwx  1 root root    0 2019-01-30 13:59 device -> ../../../gpio-leds
-r--r--r--  1 root root 4096 2019-01-30 13:59 max_brightness
drwxr-xr-x  2 root root    0 2019-01-30 13:59 power
lrwxrwxrwx  1 root root    0 2019-01-30 13:59 subsystem -> ../../../../../class/leds
-rw-r--r--  1 root root 4096 2019-01-30 13:59 trigger
-rw-r--r--  1 root root 4096 2018-01-01 12:00 uevent
root@ftp:/ #


according with the last output maybe I will ask additional information.

no problem...

[Jocko]

Ok Thank you

I can now patch some files. Next news in few days

[Jocko]

Hi

It seems the kernel does not yet support the white LED which is a bi-color LED (white and red). On your current kernel version, there is no available patch to do it, fvdw will check this point on the newest version if a patch exists.

But at least, you can check if with led settings available in sys, we can do something (I expect no).
So post

Code: Select all

grep '' /sys/class/leds/cumulus:red:sata0/*

(note '' is two single quotes and not a double quote)
Now please to report what happens (LED state) if you do

Code: Select all

echo 255 > /sys/class/leds/cumulus:red:sata0/brightness

(on ? red or white ?)
if yes,

Code: Select all

echo 50 > /sys/class/leds/cumulus:red:sata0/brightness

(brightness changes ?)
if yes,

Code: Select all

echo 0 > /sys/class/leds/cumulus:red:sata0/brightness

(led off? or white on ?)

Still if led is on

Code: Select all

echo hearbeat >/sys/class/leds/cumulus:red:sata0/trigger

do you get a hearbeat blinking ?

About usb3 port, is it ok ? In your dmesg output we found the line

Code: Select all

[   19.319077] usb usb3: Manufacturer: Linux 4.6.6 xhci-hcd

but maybe some others drivers should be also loaded.
Do you note a rw speed improvement if you use this port instead of USB2 port ?
Please to post the dmesg output after plugging an USB key or a drive in your USB3 port.

[Jocko]

Additional output,

Please to post

Code: Select all

usb-devices
lsscsi -t

when two external drives are plugged in USB2 and USB3 port. All is ok on this configuration ?

[fvdw]

Also please post output from this command

Code: Select all

lsmod

to see modules you have loaded and check wrt usb issue

[m1m1sm1t1c0]

Code: Select all

grep '' /sys/class/leds/cumulus:red:sata0/*

Code: Select all

login as: root
root@10.113.1.4's password:
root@ftp:/ # grep '' /sys/class/leds/cumulus:red:sata0/*
/sys/class/leds/cumulus:red:sata0/brightness:0
/sys/class/leds/cumulus:red:sata0/max_brightness:255
/sys/class/leds/cumulus:red:sata0/trigger:[none] kbd-scrollock kbd-numlock kbd-capslock kbd-kanalock kbd-shiftlock kbd-altgrlock kbd-ctrllock kbd-altlock kbd-shiftllock kbd-shiftrlock kbd-ctrlllock kbd-ctrlrlock nand-disk timer heartbeat cpu0 default-on
root@ftp:/ #


Was On and White

Code: Select all

echo 255 > /sys/class/leds/cumulus:red:sata0/brightness

on ? red or white ?

Go not total Red

Code: Select all

echo 50 > /sys/class/leds/cumulus:red:sata0/brightness

brightness changes ?

Nop

Code: Select all

echo 0 > /sys/class/leds/cumulus:red:sata0/brightness

led off? or white on ?

White On

Code: Select all

echo hearbeat >/sys/class/leds/cumulus:red:sata0/trigger

do you get a hearbeat blinking ?

Nop

About usb3 port, is it ok ?

Yes

Do you note a rw speed improvement if you use this port instead of USB2 port ?

Yes

Please to post the dmesg output after plugging an USB key or a drive in your USB3 port.

With USB 3.0 key in USB3 and USB 2.0 key in USB2

Code: Select all

login as: root
root@10.113.1.4's password:
root@ftp:/ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #3 Mon Jun 4 22:11:11 CEST 2018
[    0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: Seagate Personal Cloud (Cumulus, SRN21C)
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0881a4c, node_mem_map dfb7a000
[    0.000000]   Normal zone: 1152 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129920
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 510036K/524288K available (6123K kernel code, 291K rwdata, 2040K rodata, 228K init, 416K bss, 14252K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0800fbc   (8164 kB)
[    0.000000]       .init : 0xc0801000 - 0xc083a000   ( 228 kB)
[    0.000000]       .data : 0xc083a000 - 0xc0882f60   ( 292 kB)
[    0.000000]        .bss : 0xc0882f60 - 0xc08eb108   ( 417 kB)
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L2C: DT/platform modifies aux control register: 0x12086302 -> 0x1a086302
[    0.000000] Aurora cache controller enabled, 4 ways, 256 kB
[    0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302
[    0.000000] Switching to timer-based delay loop, resolution 48ns
[    0.000007] sched_clock: 32 bits at 20MHz, resolution 48ns, wraps every 103356786663ns
[    0.000023] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 91987540234 ns
[    0.000293] Console: colour dummy device 80x30
[    0.000310] Calibrating delay loop (skipped), value calculated using timer frequency.. 41.55 BogoMIPS (lpj=207773)
[    0.000323] pid_max: default: 32768 minimum: 301
[    0.000451] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000460] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001049] CPU: Testing write buffer coherency: ok
[    0.001277] Setting up static identity map for 0x8200 - 0x8258
[    0.001576] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1
[    0.001707] mvebu-pmsu: Initializing Power Management Service Unit
[    0.005460] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
[    0.005692] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.005794] xor: measuring software checksum speed
[    0.100057]    arm4regs  :   919.600 MB/sec
[    0.200056]    8regs     :   772.400 MB/sec
[    0.300056]    32regs    :   880.400 MB/sec
[    0.300063] xor: using function: arm4regs (919.600 MB/sec)
[    0.300089] pinctrl core: initialized pinctrl subsystem
[    0.300784] NET: Registered protocol family 16
[    0.301275] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.301876] cpuidle: using governor ladder
[    0.305996] sram soc:sa-sram: found no memory resource
[    0.306017] sram: probe of soc:sa-sram failed with error -22
[    0.306551] No ATAGs?
[    0.306565] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.306688] mvebu-pmsu: CPU idle is currently broken: disabling
[    0.480346] raid6: int32x1  gen()   142 MB/s
[    0.650198] raid6: int32x1  xor()   136 MB/s
[    0.820117] raid6: int32x2  gen()   213 MB/s
[    0.990081] raid6: int32x2  xor()   155 MB/s
[    1.160084] raid6: int32x4  gen()   179 MB/s
[    1.330090] raid6: int32x4  xor()   140 MB/s
[    1.500282] raid6: int32x8  gen()   175 MB/s
[    1.670130] raid6: int32x8  xor()   116 MB/s
[    1.670137] raid6: using algorithm int32x2 gen() 213 MB/s
[    1.670143] raid6: .... xor() 155 MB/s, rmw enabled
[    1.670148] raid6: using intx1 recovery algorithm
[    1.670703] SCSI subsystem initialized
[    1.670872] libata version 3.00 loaded.
[    1.672405] clocksource: Switched to clocksource armada_370_xp_clocksource
[    1.672695] FS-Cache: Loaded
[    1.678471] NET: Registered protocol family 2
[    1.678972] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    1.679009] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    1.679046] TCP: Hash tables configured (established 4096 bind 4096)
[    1.679115] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.679129] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.679243] NET: Registered protocol family 1
[    1.679515] RPC: Registered named UNIX socket transport module.
[    1.679524] RPC: Registered udp transport module.
[    1.679529] RPC: Registered tcp transport module.
[    1.679534] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.679552] PCI: CLS 0 bytes, default 64
[    1.679801] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    1.680709] futex hash table entries: 256 (order: -1, 3072 bytes)
[    1.681306] workingset: timestamp_bits=13 max_order=17 bucket_order=4
[    1.681654] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.681904] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.682273] ntfs: driver 2.1.32 [Flags: R/W].
[    1.682307] fuse init (API version 7.24)
[    1.682590] JFS: nTxBlock = 3984, nTxLock = 31877
[    1.687903] async_tx: api initialized (async)
[    1.687998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.688014] io scheduler noop registered
[    1.688028] io scheduler deadline registered
[    1.688057] io scheduler cfq registered (default)
[    1.688704] armada-370-pinctrl f1018000.pin-ctrl: registered pinctrl driver
[    1.689477] irq: Cannot allocate irq_descs @ IRQ39, assuming pre-allocated
[    1.689864] irq: Cannot allocate irq_descs @ IRQ71, assuming pre-allocated
[    1.690141] irq: Cannot allocate irq_descs @ IRQ103, assuming pre-allocated
[    1.690808] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[    1.690824] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    1.690835] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff]
[    1.690845] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.690875] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400
[    1.691097] PCI: bus0: Fast back to back transfers disabled
[    1.691108] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.691250] pci 0000:01:00.0: [1b21:1142] type 00 class 0x0c0330
[    1.691283] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40007fff 64bit]
[    1.691390] pci 0000:01:00.0: PME# supported from D3hot
[    1.691598] PCI: bus1: Fast back to back transfers disabled
[    1.691612] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.691678] pci 0000:00:01.0: BAR 8: assigned [mem 0xf8000000-0xf80fffff]
[    1.691693] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf8007fff 64bit]
[    1.691711] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.691723] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xf80fffff]
[    1.691764] pci 0000:00:01.0: enabling device (0140 -> 0142)
[    1.691959] mv_xor f1060800.xor: Marvell shared XOR driver
[    1.733157] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.734181] mv_xor f1060900.xor: Marvell shared XOR driver
[    1.773132] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.774304] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.775526] console [ttyS0] disabled
[    1.795655] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 20, base_baud = 12500000) is a 16550A
[    2.477897] console [ttyS0] enabled
[    2.491770] brd: module loaded
[    2.499975] loop: module loaded
[    2.503641] sata_mv f10a0000.sata: version 1.28
[    2.503799] sata_mv f10a0000.sata: slots 32 ports 1
[    2.509673] scsi host0: sata_mv
[    2.513096] ata1: SATA max UDMA/133 irq 28
[    2.518707] m25p80 spi0.0: mx25l8005 (1024 Kbytes)
[    2.523564] 1 ofpart partitions found on MTD device spi0.0
[    2.529074] Creating 1 MTD partitions on "spi0.0":
[    2.533904] 0x000000000000-0x000000100000 : "u-boot"
[    2.540503] libphy: Fixed MDIO Bus: probed
[    2.544655] tun: Universal TUN/TAP device driver, 1.6
[    2.549729] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.556056] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    2.564152] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    2.573232] libphy: orion_mdio_bus: probed
[    2.579274] mvneta f1074000.ethernet eth0: Using hardware mac address 00:10:75:58:85:a8
[    2.587440] PPP generic driver version 2.4.2
[    2.591859] PPP Deflate Compression module registered
[    2.596965] PPP MPPE Compression module registered
[    2.601784] NET: Registered protocol family 24
[    2.606675] aoe: cannot create debugfs directory
[    2.611452] aoe: AoE v85 initialised.
[    2.615522] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
[    2.633476] md: linear personality registered for level -1
[    2.638996] md: raid0 personality registered for level 0
[    2.644353] md: raid1 personality registered for level 1
[    2.649694] md: raid10 personality registered for level 10
[    2.655451] md: raid6 personality registered for level 6
[    2.660788] md: raid5 personality registered for level 5
[    2.666140] md: raid4 personality registered for level 4
[    2.671622] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.680331] device-mapper: multipath: version 1.11.0 loaded
[    2.685956] device-mapper: multipath round-robin: version 1.1.0 loaded
[    2.692529] device-mapper: multipath queue-length: version 0.2.0 loaded
[    2.699178] device-mapper: multipath service-time: version 0.3.0 loaded
[    2.705884] device-mapper: dm-log-userspace: version 1.3.0 loaded
[    2.712012] device-mapper: raid: Loading target version 1.7.0
[    2.718224] ledtrig-cpu: registered to indicate activity on CPUs
[    2.724537] marvell-cesa: probe of f1090000.crypto failed with error -22
[    2.731395] hidraw: raw HID events driver (C) Jiri Kosina
[    2.737128] Netfilter messages via NETLINK v0.30.
[    2.741867] nfnl_acct: registering with nfnetlink.
[    2.746724] nf_conntrack version 0.5.0 (7969 buckets, 31876 max)
[    2.753397] ipip: IPv4 over IPv4 tunneling driver
[    2.758867] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.764413] NET: Registered protocol family 10
[    2.769794] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.775421] sit: IPv6 over IPv4 tunneling driver
[    2.780660] NET: Registered protocol family 17
[    2.785189] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.797887] Bridge firewalling registered
[    2.801922] NET: Registered protocol family 5
[    2.806438] Key type dns_resolver registered
[    2.811197] registered taskstats version 1
[    2.816300] console [netcon0] enabled
[    2.819981] netconsole: network logging started
[    2.825044] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    2.831976] rtc-mv f1010300.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.032426] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[    3.043228] ata1.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
[    3.049442] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    3.062939] ata1.00: configured for UDMA/133
[    3.067595] scsi 0:0:0:0: Direct-Access     ATA      ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
[    3.076701] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.084421] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.089880] sd 0:0:0:0: [sda] Write Protect is off
[    3.094713] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.094801] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.145842]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[    3.153048] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.157745] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[    3.451972] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
[    3.469017] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[    3.475941] EXT4-fs (sda7): write access will be enabled during recovery
[    3.822863] EXT4-fs (sda7): recovery complete
[    3.902467] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    3.910199] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
[    3.917183] Freeing unused kernel memory: 228K (c0801000 - c083a000)
[    3.923574] This architecture does not have kernel memory protection.
[    4.272484] EXT4-fs (sda7): re-mounted. Opts: (null)
[    5.041951] usbcore: registered new interface driver usbfs
[    5.047576] usbcore: registered new interface driver hub
[    5.052978] usbcore: registered new device driver usb
[    5.060047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.067211] ehci-orion: EHCI orion driver
[    5.071404] orion-ehci f1050000.usb: EHCI Host Controller
[    5.076884] orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1
[    5.084608] orion-ehci f1050000.usb: irq 26, io mem 0xf1050000
[    5.102417] orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00
[    5.108498] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.115335] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.122600] usb usb1: Product: EHCI Host Controller
[    5.127501] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd
[    5.132846] usb usb1: SerialNumber: f1050000.usb
[    5.137978] hub 1-0:1.0: USB hub found
[    5.141773] hub 1-0:1.0: 1 port detected
[    5.158903] usbcore: registered new interface driver usb-storage
[    5.175941] usbcore: registered new interface driver usblp
[    5.206643] Loading iSCSI transport class v2.0-870.
[    5.215947] iscsi: registered transport (tcp)
[    5.504815] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[    5.812697] EXT4-fs (sda5): warning: checktime reached, running e2fsck is recommended
[    5.868302] EXT4-fs (sda5): 2 orphan inodes deleted
[    5.873433] EXT4-fs (sda5): recovery complete
[    6.072469] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.235856] random: mkswap urandom read with 91 bits of entropy available
[    6.304138] Adding 524284k swap on /dev/sda3.  Priority:-1 extents:1 across:524284k
[   12.062703] random: nonblocking pool is initialized
[   18.095332] udevd (316): /proc/316/oom_adj is deprecated, please use /proc/316/oom_score_adj instead.
[   18.104718] udev: starting version 130
[   18.805425] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   18.810706] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[   18.878634] xhci_hcd 0000:01:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
[   19.243370] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   19.250203] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.257485] usb usb2: Product: xHCI Host Controller
[   19.262387] usb usb2: Manufacturer: Linux 4.6.6 xhci-hcd
[   19.267733] usb usb2: SerialNumber: 0000:01:00.0
[   19.273555] hub 2-0:1.0: USB hub found
[   19.277839] hub 2-0:1.0: 2 ports detected
[   19.282340] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   19.287635] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
[   19.295214] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[   19.303451] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[   19.310274] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.317542] usb usb3: Product: xHCI Host Controller
[   19.322451] usb usb3: Manufacturer: Linux 4.6.6 xhci-hcd
[   19.327788] usb usb3: SerialNumber: 0000:01:00.0
[   19.333524] hub 3-0:1.0: USB hub found
[   19.337792] hub 3-0:1.0: 2 ports detected
[   29.899117] EXT4-fs (sda8): warning: checktime reached, running e2fsck is recommended
[   30.174803] EXT4-fs (sda8): recovery complete
[   30.214589] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl,nodelalloc
[   31.512632] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.513167] mvneta f1074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   35.521063] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   39.456729] capability: warning: `proftpd' uses 32-bit capabilities (legacy support in use)
[   65.036005] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[  536.874913] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
[  536.904202] usb 3-1: New USB device found, idVendor=125f, idProduct=312b
[  536.910953] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  536.918132] usb 3-1: Product: ADATA USB Flash Drive
[  536.923034] usb 3-1: Manufacturer: ADATA
[  536.926983] usb 3-1: SerialNumber: 1513118060230018
[  536.934755] usb-storage 3-1:1.0: USB Mass Storage device detected
[  536.954610] scsi host1: usb-storage 3-1:1.0
[  538.133413] scsi 1:0:0:0: Direct-Access     ADATA    USB Flash Drive  1100 PQ: 0 ANSI: 6
[  538.145885] sd 1:0:0:0: [sdb] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB)
[  538.164388] sd 1:0:0:0: [sdb] Write Protect is off
[  538.169219] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  538.174936] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  538.197416]  sdb: sdb1
[  538.203991] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[  538.962880] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  709.329257] usb 1-1: new high-speed USB device number 2 using orion-ehci
[  709.480200] usb 1-1: New USB device found, idVendor=0781, idProduct=5406
[  709.486944] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  709.494135] usb 1-1: Product: U3 Cruzer Micro
[  709.498515] usb 1-1: Manufacturer: SanDisk
[  709.502641] usb 1-1: SerialNumber: 44567202EE9160BF
[  709.509327] usb-storage 1-1:1.0: USB Mass Storage device detected
[  709.529493] scsi host2: usb-storage 1-1:1.0
[  710.530125] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0 CCS
[  710.545289] sd 2:0:0:0: [sdc] Attached SCSI removable disk
root@ftp:/ #


[m1m1sm1t1c0]

Code: Select all

usb-devices
lsscsi -t

when two external drives are plugged in USB2 and USB3 port. All is ok on this configuration ?

Yes

Code: Select all

root@ftp:/ # usb-devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=04.06
S:  Manufacturer=Linux 4.6.6 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=f1050000.usb
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0781 ProdID=5406 Rev=02.00
S:  Manufacturer=SanDisk
S:  Product=U3 Cruzer Micro
S:  SerialNumber=44567202EE9160BF
C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=04.06
S:  Manufacturer=Linux 4.6.6 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:01:00.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 2
D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev=04.06
S:  Manufacturer=Linux 4.6.6 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:01:00.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=125f ProdID=312b Rev=11.00
S:  Manufacturer=ADATA
S:  Product=ADATA USB Flash Drive
S:  SerialNumber=1513118060230018
C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=304mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
root@ftp:/ # lsscsi -t
[0:0:0:0]    disk    sata:                           /dev/sda
[1:0:0:0]    disk    usb: 3-1:1.0                    /dev/sdb
[2:0:0:0]    disk    usb: 1-1:1.0                    /dev/sdc
root@ftp:/ #


[m1m1sm1t1c0]

Also please post output from this command

Code: Select all

lsmod

to see modules you have loaded and check wrt usb issue

Code: Select all

login as: root
root@10.113.1.4's password:
root@ftp:/ # lsmod
xhci_pci 3504 0 - Live 0xbf0be000
xhci_hcd 90052 1 xhci_pci, Live 0xbf0a1000
iscsi_tcp 8140 0 - Live 0xbf09b000
libiscsi_tcp 11292 1 iscsi_tcp, Live 0xbf094000
libiscsi 32107 2 iscsi_tcp,libiscsi_tcp, Live 0xbf085000
scsi_transport_iscsi 56358 2 iscsi_tcp,libiscsi, Live 0xbf06a000
usblp 9262 0 - Live 0xbf063000
usb_storage 38422 1 - Live 0xbf04f000
ehci_orion 2794 0 - Live 0xbf04b000
ehci_hcd 36922 1 ehci_orion, Live 0xbf03c000
usbcore 145666 6 xhci_pci,xhci_hcd,usblp,usb_storage,ehci_orion,ehci_hcd, Live 0xbf004000
usb_common 2727 1 usbcore, Live 0xbf000000
root@ftp:/ #


[fvdw]

Thank you, there is one I miss.

xhci-plat-hcd

You can load it using modprobe or insmod