plugout.net

by **Aled72** » Sun Jun 24, 2018 5:36 am

Hello to all,
I think due to a power failure that has corrupted the disk database.

In fact, I initialize the usb disks but then at the end of the procedure the system keeps seeing them not formatted.

Is there a way to reset the database? I have no data loss problems as I have already copied everything.

Thank you so much for your help.

by **Jocko** » Sun Jun 24, 2018 8:15 am

Hi Aled72,

Do you install the last rollup patch (version 05) ?

by **Aled72** » Sun Jun 24, 2018 3:55 pm

Yes if is this fvdw-sl-17.0-patch_05-26feb18.zip

by **Jocko** » Sun Jun 24, 2018 4:47 pm

Ok,

You should have two files :<setupjob.log and reset.sh in /etc/.setup.fs
Please to post them

Post also these outputs

Code: Select all: mount cat /proc/partitions

by **Aled72** » Sun Jun 24, 2018 6:05 pm

Code: Select all: root@Storage:/etc/.setup.fs # cat setupjob.log Setup task reset.sh is now running Found disk: seh(00D04B920B07FFA3-0:0_LaCie_d2_quadra) Delete the partiton table on seh: OK Create a new partiton ms-dos table on seh: =>Creating ms-dos partition table succeeded Format partition seh1 with file system ext4: =>mke2fs 1.43.4 (31-Jan-2017) Creating filesystem with 488359935 4k blocks and 122093568 inodes Filesystem UUID: 8e7ad2f9-932e-4dd2-b50f-ab3c8da2c0b3 Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 Allocating group tables: done Writing inode tables: done Creating journal (262144 blocks): done Writing superblocks and filesystem accounting information: done =>Formatting seh1 succeeded Update partition type on seh1: OK Setup task reset.sh is ended NAS restarting on user's request Restore the regular boot mode... OK NAS is restarting...OK

Code: Select all: root@Storage:/etc/.setup.fs # cat reset.sh #!/bin/sh # Jocko : version 1.3 19/01/2017 . /etc/.setup.fs/setupjob.ini . /etc/.setup.fs/dic_setup.ini LOG=/etc/.setup.fs/setupjob.log stopjob(){ stop=$(date '+%s') [ -n "$1" ] && error=$@ || error= sed -rie "s/.*(stop=).*/\1$stop/g;s/.*(status=).*/\1$status/g;s/.*(error=).*/\1\"$error\"/g" /etc/.setup.fs/setupjob.ini [ $status -eq 3 ] && echo ''$@' '>> $LOG } check_mode(){ if ps x -o cmd|grep -v grep|grep -c noflushd > /dev/null then status=3 stopjob 'setup mode is not available !' exit 1 fi } unlink /rw_fs/tmp/setup 2>/dev/null check_mode status=0 stop= error= if [ -z "$start" ] || [ $start -eq 0 ] then start=$(date '+%s') sed -rie "s/.*(start=).*/\1$start/g;s/.*(stop=).*/\1$stop/g;s/.*(status=).*/\1$status/g" /etc/.setup.fs/setupjob.ini echo -e ''$task_start" "> $LOG else echo -e ' '$task_restart" ">> $LOG sed -rie "s/.*(stop=).*/\1$stop/g;s/.*(status=).*/\1$status/g" /etc/.setup.fs/setupjob.ini fi if [ -f /etc/.setup.fs/check_disk ] then . /etc/.setup.fs/check_disk 'seh,00D04B920B07FFA3-0:0_LaCie_d2_quadra,1 ' if [ -e '/etc/.setup.fs/delete_table.0' ] then src=$(readlink -f '/etc/.setup.fs/delete_table.0') . $src seh unlink "$src" fi sleep 5 if [ -e '/etc/.setup.fs/set_table.0' ] then src=$(readlink -f '/etc/.setup.fs/set_table.0') . $src seh1 ms-dos unlink "$src" fi sleep 5 if [ -e '/etc/.setup.fs/set_fs.0' ] then src=$(readlink -f '/etc/.setup.fs/set_fs.0') . $src seh1 ext4 unlink "$src" fi if [ -e '/etc/.setup.fs/set_partid.0' ] then src=$(readlink -f '/etc/.setup.fs/set_partid.0') . $src seh1 unlink "$src" fi status=1 stopjob echo ''$task_end' '>> $LOG # unlink "$0" /etc/leds_switch off sleep 5 /etc/leds_bootup else status=3 stopjob $err_missing_info fi

Code: Select all: root@Storage:/ # mount /dev/sda7 on / type ext3 (rw,relatime,data=ordered) none on /proc type proc (rw,relatime) none on /sys type sysfs (rw,relatime) none on /dev/pts type devpts (rw,relatime,mode=600) /dev/sda5 on /rw_fs type ext3 (rw,noatime,data=ordered) tmpfs on /rw_fs/tmp/usr/var type tmpfs (rw,relatime,size=5000k) nfsd on /proc/fs/nfsd type nfsd (rw,relatime) /dev/md0 on /share/1100 type ext4 (rw,noatime,nodelalloc,stripe=256,data=ordered)

Code: Select all: root@Storage:/ # cat /proc/partitions major minor #blocks name 1 0 4096 ram0 1 1 4096 ram1 1 2 4096 ram2 1 3 4096 ram3 1 4 4096 ram4 1 5 4096 ram5 1 6 4096 ram6 1 7 4096 ram7 1 8 4096 ram8 1 9 4096 ram9 1 10 4096 ram10 1 11 4096 ram11 1 12 4096 ram12 1 13 4096 ram13 1 14 4096 ram14 1 15 4096 ram15 31 0 500 mtdblock0 31 1 4 mtdblock1 8 0 1953514584 sda 8 1 524288 sda1 8 2 524288 sda2 8 3 524288 sda3 8 4 8192 sda4 8 5 786432 sda5 8 6 8192 sda6 8 7 524288 sda7 8 8 1950612551 sda8 8 16 1953514584 seg 8 17 1953439740 seg1 8 32 1953514584 seh 8 33 1953439740 seh1 8 48 1953514584 sei 8 49 1953439740 sei1 9 0 3904051712 md0

by **Jocko** » Mon Jun 25, 2018 4:41 pm

Ok I detect no error in the setup log.

So post

Code: Select all: fdisk -l file -bs /dev/se?1 /etc/api/nasapi.php "mrvlGetDisk high all" /etc/api/nasapi.php "mrvlGetVolume high all"

by **Aled72** » Mon Jun 25, 2018 4:56 pm

Thanks for help.

Code: Select all: root@Storage:/ # fdisk -l Disk /dev/sda: 2000.3 GB, 2000398934016 bytes 256 heads, 63 sectors/track, 242251 cylinders Units = cylinders of 16128 * 512 = 8257536 bytes Device Boot Start End Blocks Id System /dev/sda1 1 242252 1953514583+ ee EFI GPT Disk /dev/seg: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/seg1 9 243200 1953439740 fd Linux raid autodetect Disk /dev/seh: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/seh1 9 243200 1953439740 83 Linux Disk /dev/sei: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sei1 9 243200 1953439740 83 Linux fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/md0: 2199.0 GB, 2199023255040 bytes 2 heads, 4 sectors/track, 536870911 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md0 doesn't contain a valid partition table

Code: Select all: root@Storage:/ # file -bs /dev/se?1 data Linux rev 1.0 ext4 filesystem data, UUID=8e7ad2f9-932e-4dd2-b50f-ab3c8da2c0b3 (extents) (large files) (huge files) Linux rev 1.0 ext4 filesystem data, UUID=db2e06eb-6758-4b67-be29-f7471435ceed (extents) (large files) (huge files) writable, no read permission writable, no read permission

Code: Select all: root@Storage:/ # /etc/api/nasapi.php "mrvlGetDisk high all" Array ( [0] => Array ( [diskid] => JK1105B8GYG4VX [name] => Disk1 [blockdev] => /dev/sda [isusb] => 0 [isformated] => 1 [isinternal] => 1 [issystem] => 1 [totalsize] => 1860.24 [freesize] => 0 [table] => gpt [partitions] => Array ( [0] => Array ( [size] => 1860.24909163 [volid] => 1100 [color] => #9d773e [lvname] => /dev/sda8 ) ) ) [1] => Array ( [diskid] => 00D04BA71808948A [name] => eSATA-G [blockdev] => /dev/seg [isusb] => 1 [isformated] => 1 [isinternal] => 1 [issystem] => 0 [totalsize] => 1862.94 [freesize] => 0 [table] => dos [partitions] => Array ( [0] => Array ( [size] => 1862.94530869 [volid] => 1100 [color] => #1aea3e [lvname] => /dev/seg1 ) ) ) )

Code: Select all: root@Storage:/ # /etc/api/nasapi.php "mrvlGetVolume high all" Array ( [0] => Array ( [volid] => 1100 [totalsize] => 3723.19384766 [freesize] => 2691.76961899 [usedsize] => 1031.42422867 [name] => RD0-0 [md] => /dev/md0 [color] => #a8e865 [formatting] => 0 [status] => clean [busy] => 0 [raidtype] => raid0 [devices] => /dev/sda8 /dev/seg1 [redundant] => 0 ) )

by **Jocko** » Tue Jun 26, 2018 7:09 am

So if I understand your config :
- you have an e-sata disk (seg), which is rightly detected and included in your raid1 (built with the internal disk)
- you have two usb disks (seh and sei). Both are rightly initialized but they are not detected by the firmware :scratch

Previously, before resetting seh, how was it detected by the firmware ? : listed in the main disk table of the setup menu or only listed as 'other disks' on the initialize disk menu ?

So need to deepen the boot sequence:-activate the debug mode

Code: Select all: debugon

- reboot the nas
- disable the debug mode

Code: Select all: debugoff

Then post

Code: Select all: cat boot.log mount dmesg cat /var/log/messages grep 'usbmountmode' /etc/nas_conf_db.xml

by **Aled72** » Tue Jun 26, 2018 6:47 pm

Code: Select all: root@Storage:/ # cat boot.log start boot log detect and set platform d2nw2 kirkwood UIMAGE-466-KIRKWOOD-26 Current kernel: 4.6.6 #26 PREEMPT Sat Feb 17 11:24:54 CET 2018 d2nw2 mount dev/pts update dev nodes booting using root file system... enable IP forwarding... run udevstart to update dev nodes when necessary inserting kernel modules: modprobe: module 'iscsi_trgt' not found start buttons control daemon device = d2nw2 source = buttons-nwsp2 buttons-nwsp2 daemon started Tue Jun 26 22:29:57 CEST 2018 create temporary passwd file create temporary group file configure loopback network interface setting reboot and standby d2nw2 rebootd-nwsp2 d2nw2 standbyd-nwsp2 starting php based setup routines step 1 mwexec()[2018/06/26 22:30:09]: killall syslogd * Starting syslogd... mwexec()[2018/06/26 22:30:09]: /sbin/syslogd -b 5 [ OK ] * Initialize the volatile db file...mwexec()[2018/06/26 22:30:09]: chown 99:99 '/tmp/etc/nas_conf_vltl.xml' mwexec()[2018/06/26 22:30:09]: chmod 666 '/tmp/etc/nas_conf_vltl.xml' [ OK ] * Starting udevd... mwexec()[2018/06/26 22:30:09]: /sbin/udevd --daemon mwexec()[2018/06/26 22:30:09]: /sbin/udevadm trigger --action=add mwexec()[2018/06/26 22:30:10]: /sbin/udevadm settle --timeout=5 [ OK ] mwexec()[2018/06/26 22:30:19]: sh -c '/usr/bin/grep -ic mailaddr /rw_fs/etc/mdadm.conf > /dev/null && /bin/sed -rie "s/.*mailaddr.*/#MAILADDR/gI" /rw_fs/etc/mdadm.conf || echo -e " #MAILADDR " >> /rw_fs/etc/mdadm.conf' * Starting RAID monitor: mwexec()[2018/06/26 22:30:19]: /sbin/mdadm --monitor --daemonise --scan --delay=600 --pid-file=/var/run/mdadm.pid [ OK ] * Starting restore RAID devices... - Assembling device /dev/md0: mwexec()[2018/06/26 22:30:19]: mdadm --assemble /dev/md0 --run [ OK ] Warning: file_get_contents(/sys/block/md0/md/sync_action): failed to open stream: No such file or directory in /etc/finc/dm_restore_md.finc on line 52 - Assembling device /dev/md2: mwexec()[2018/06/26 22:30:57]: mdadm --assemble /dev/md2 --run [ Fail ] Warning: file_get_contents(/sys/block/md2/md/sync_action): failed to open stream: No such file or directory in /etc/finc/dm_restore_md.finc on line 52 * Finishing restore RAID devices... [ Fail ] * Found database configuration file... [ OK ] mwexec()[2018/06/26 22:30:58]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml mwexec()[2018/06/26 22:30:58]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak mwexec()[2018/06/26 22:30:58]: chown 99:99 /rw_fs/etc/nas_conf_db.xml mwexec()[2018/06/26 22:30:58]: chmod 666 /rw_fs/etc/nas_conf_db.xml * Updating Disks database... mwexec()[2018/06/26 22:30:58]: unlink /direct-usb mwexec()[2018/06/26 22:30:58]: ln -s /share/1100 /direct-usb mwexec()[2018/06/26 22:30:58]: unlink /usr/local mwexec()[2018/06/26 22:30:58]: /usr/bin/ln -s /share/1100/fvdw/addons /usr/local mwexec()[2018/06/26 22:30:58]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml mwexec()[2018/06/26 22:30:58]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak [ OK ] * Starting mount of volumes... - Mounting volume RD0-0: mwexec()[2018/06/26 22:30:58]: /bin/mkdir -p /share/1100 mwexec()[2018/06/26 22:30:59]: /bin/mount -o user_xattr,acl,noatime,nodelalloc /dev/md0 /share/1100 mwexec()[2018/06/26 22:31:02]: /usr/bin/chmod 777 '/share/1100' [ OK ] - Mounting volume USB-I-1: [ USB : mounted later ] * Finishing mount of volumes... [ OK ] mwexec()[2018/06/26 22:31:03]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml mwexec()[2018/06/26 22:31:03]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak * Generating Hosts File... mwexec()[2018/06/26 22:31:03]: /usr/bin/unlink /etc/hosts [ OK ] * Configuring System Hostname... mwexec()[2018/06/26 22:31:03]: /usr/bin/hostname 'Storage.local' [ OK ] * Configuring LAN interface... mwexec()[2018/06/26 22:31:03]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml mwexec()[2018/06/26 22:31:03]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak mwexec()[2018/06/26 22:31:03]: /sbin/ifconfig -a 'eth0' 10.0.1.10 netmask 255.255.255.0 mwexec()[2018/06/26 22:31:04]: /sbin/route add default gw '10.0.1.1' dev 'eth0' mwexec()[2018/06/26 22:31:04]: /sbin/ifconfig 'eth0' up mwexec()[2018/06/26 22:31:04]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml mwexec()[2018/06/26 22:31:04]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak [ OK ] * Initializing Timezone... mwexec()[2018/06/26 22:31:04]: ln -sf /usr/share/zoneinfo/Europe/Rome /etc/localtime [ OK ] * Starting web server... mwexec()[2018/06/26 22:31:05]: rm /etc/webdav.conf mwexec()[2018/06/26 22:31:05]: chmod 644 /etc/webdav.conf mwexec()[2018/06/26 22:31:05]: unlink /etc/proxy.conf mwexec()[2018/06/26 22:31:05]: touch /etc/proxy.conf mwexec()[2018/06/26 22:31:05]: sh -c 'echo > "/etc/SSL_fvdwsl.conf"' mwexec()[2018/06/26 22:31:05]: /usr/bin/httpd -f httpd.conf -d /etc [ OK ] * Starting mount of internal USB ... * Finishing mount internal USB ... [ OK ] * Configuring Disks... mwexec()[2018/06/26 22:31:06]: /usr/sbin/noflushd -n 15 /dev/sda /dev/seg [ OK ] * Configuring Samba...mwexec()[2018/06/26 22:31:06]: /bin/sh -c 'ismounted=`/usr/bin/mount|/usr/bin/grep -c " on /share/1100 "`;[ $ismounted -eq 0 ] && exit 0 || exit 1' [ OK ] mwexec()[2018/06/26 22:31:06]: /usr/sbin/nmbd -D -l /var/log/samba mwexec()[2018/06/26 22:31:06]: /usr/sbin/smbd -D -l /var/log/samba * Configuring System Users... Root password: use default password Set users, set users password [ Fail ] * Starting Fvdw-sl Discovery Daemon...mwexec()[2018/06/26 22:31:12]: /usr/bin/killall discoverd mwexec_bg()[2018/06/26 22:31:12]: /bin/busybox setsid sh -c "sleep 30;/usr/bin/discoverd" [ OK ] start rpcbind service starting php based setup routines step 2 mwexec()[2018/06/26 22:31:12]: chmod 755 /rw_fs/etc/dropbear mwexec()[2018/06/26 22:31:12]: chmod 600 /rw_fs/etc/dropbear/dropbear_rsa_host_key mwexec()[2018/06/26 22:31:12]: touch /rw_fs/tmp/var/log/lastlog root@Storage:/ # cat boot.log start boot log detect and set platform d2nw2 kirkwood UIMAGE-466-KIRKWOOD-26 Current kernel: 4.6.6 #26 PREEMPT Sat Feb 17 11:24:54 CET 2018 d2nw2 mount dev/pts update dev nodes booting using root file system... enable IP forwarding... run udevstart to update dev nodes when necessary inserting kernel modules: modprobe: module 'iscsi_trgt' not found start buttons control daemon device = d2nw2 source = buttons-nwsp2 buttons-nwsp2 daemon started Tue Jun 26 22:29:57 CEST 2018 create temporary passwd file create temporary group file configure loopback network interface setting reboot and standby d2nw2 rebootd-nwsp2 d2nw2 standbyd-nwsp2 starting php based setup routines step 1 mwexec()[2018/06/26 22:30:09]: killall syslogd * Starting syslogd... mwexec()[2018/06/26 22:30:09]: /sbin/syslogd -b 5 [ OK ] * Initialize the volatile db file...mwexec()[2018/06/26 22:30:09]: chown 99:99 '/tmp/etc/nas_conf_vltl.xml' mwexec()[2018/06/26 22:30:09]: chmod 666 '/tmp/etc/nas_conf_vltl.xml' [ OK ] * Starting udevd... mwexec()[2018/06/26 22:30:09]: /sbin/udevd --daemon mwexec()[2018/06/26 22:30:09]: /sbin/udevadm trigger --action=add mwexec()[2018/06/26 22:30:10]: /sbin/udevadm settle --timeout=5 [ OK ] mwexec()[2018/06/26 22:30:19]: sh -c '/usr/bin/grep -ic mailaddr /rw_fs/etc/mdadm.conf > /dev/null && /bin/sed -rie "s/.*mailaddr.*/#MAILADDR/gI" /rw_fs/etc/mdadm.conf || echo -e " #MAILADDR " >> /rw_fs/etc/mdadm.conf' * Starting RAID monitor: mwexec()[2018/06/26 22:30:19]: /sbin/mdadm --monitor --daemonise --scan --delay=600 --pid-file=/var/run/mdadm.pid [ OK ] * Starting restore RAID devices... - Assembling device /dev/md0: mwexec()[2018/06/26 22:30:19]: mdadm --assemble /dev/md0 --run [ OK ] Warning: file_get_contents(/sys/block/md0/md/sync_action): failed to open stream: No such file or directory in /etc/finc/dm_restore_md.finc on line 52 - Assembling device /dev/md2: mwexec()[2018/06/26 22:30:57]: mdadm --assemble /dev/md2 --run [ Fail ] Warning: file_get_contents(/sys/block/md2/md/sync_action): failed to open stream: No such file or directory in /etc/finc/dm_restore_md.finc on line 52 * Finishing restore RAID devices... [ Fail ] * Found database configuration file... [ OK ] mwexec()[2018/06/26 22:30:58]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml mwexec()[2018/06/26 22:30:58]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak mwexec()[2018/06/26 22:30:58]: chown 99:99 /rw_fs/etc/nas_conf_db.xml mwexec()[2018/06/26 22:30:58]: chmod 666 /rw_fs/etc/nas_conf_db.xml * Updating Disks database... mwexec()[2018/06/26 22:30:58]: unlink /direct-usb mwexec()[2018/06/26 22:30:58]: ln -s /share/1100 /direct-usb mwexec()[2018/06/26 22:30:58]: unlink /usr/local mwexec()[2018/06/26 22:30:58]: /usr/bin/ln -s /share/1100/fvdw/addons /usr/local mwexec()[2018/06/26 22:30:58]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml mwexec()[2018/06/26 22:30:58]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak [ OK ] * Starting mount of volumes... - Mounting volume RD0-0: mwexec()[2018/06/26 22:30:58]: /bin/mkdir -p /share/1100 mwexec()[2018/06/26 22:30:59]: /bin/mount -o user_xattr,acl,noatime,nodelalloc /dev/md0 /share/1100 mwexec()[2018/06/26 22:31:02]: /usr/bin/chmod 777 '/share/1100' [ OK ] - Mounting volume USB-I-1: [ USB : mounted later ] * Finishing mount of volumes... [ OK ] mwexec()[2018/06/26 22:31:03]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml mwexec()[2018/06/26 22:31:03]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak * Generating Hosts File... mwexec()[2018/06/26 22:31:03]: /usr/bin/unlink /etc/hosts [ OK ] * Configuring System Hostname... mwexec()[2018/06/26 22:31:03]: /usr/bin/hostname 'Storage.local' [ OK ] * Configuring LAN interface... mwexec()[2018/06/26 22:31:03]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml mwexec()[2018/06/26 22:31:03]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak mwexec()[2018/06/26 22:31:03]: /sbin/ifconfig -a 'eth0' 10.0.1.10 netmask 255.255.255.0 mwexec()[2018/06/26 22:31:04]: /sbin/route add default gw '10.0.1.1' dev 'eth0' mwexec()[2018/06/26 22:31:04]: /sbin/ifconfig 'eth0' up mwexec()[2018/06/26 22:31:04]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml mwexec()[2018/06/26 22:31:04]: /usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak [ OK ] * Initializing Timezone... mwexec()[2018/06/26 22:31:04]: ln -sf /usr/share/zoneinfo/Europe/Rome /etc/localtime [ OK ] * Starting web server... mwexec()[2018/06/26 22:31:05]: rm /etc/webdav.conf mwexec()[2018/06/26 22:31:05]: chmod 644 /etc/webdav.conf mwexec()[2018/06/26 22:31:05]: unlink /etc/proxy.conf mwexec()[2018/06/26 22:31:05]: touch /etc/proxy.conf mwexec()[2018/06/26 22:31:05]: sh -c 'echo > "/etc/SSL_fvdwsl.conf"' mwexec()[2018/06/26 22:31:05]: /usr/bin/httpd -f httpd.conf -d /etc [ OK ] * Starting mount of internal USB ... * Finishing mount internal USB ... [ OK ] * Configuring Disks... mwexec()[2018/06/26 22:31:06]: /usr/sbin/noflushd -n 15 /dev/sda /dev/seg [ OK ] * Configuring Samba...mwexec()[2018/06/26 22:31:06]: /bin/sh -c 'ismounted=`/usr/bin/mount|/usr/bin/grep -c " on /share/1100 "`;[ $ismounted -eq 0 ] && exit 0 || exit 1' [ OK ] mwexec()[2018/06/26 22:31:06]: /usr/sbin/nmbd -D -l /var/log/samba mwexec()[2018/06/26 22:31:06]: /usr/sbin/smbd -D -l /var/log/samba * Configuring System Users... Root password: use default password Set users, set users password [ Fail ] * Starting Fvdw-sl Discovery Daemon...mwexec()[2018/06/26 22:31:12]: /usr/bin/killall discoverd mwexec_bg()[2018/06/26 22:31:12]: /bin/busybox setsid sh -c "sleep 30;/usr/bin/discoverd" [ OK ] start rpcbind service starting php based setup routines step 2 mwexec()[2018/06/26 22:31:12]: chmod 755 /rw_fs/etc/dropbear mwexec()[2018/06/26 22:31:12]: chmod 600 /rw_fs/etc/dropbear/dropbear_rsa_host_key mwexec()[2018/06/26 22:31:12]: touch /rw_fs/tmp/var/log/lastlog mwexec()[2018/06/26 22:31:12]: touch /rw_fs/tmp/var/run/utmp mwexec()[2018/06/26 22:31:12]: sudo chmod 777 '/rw_fs/.ssh' mwexec()[2018/06/26 22:31:12]: sudo chmod 700 '/rw_fs/.ssh' * Starting dropbear... mwexec()[2018/06/26 22:31:12]: dropbear -p 22 -r '/rw_fs/etc/dropbear/dropbear_rsa_host_key' [ OK ] mwexec()[2018/06/26 22:31:12]: unlink /etc/profile * Kill temporary dropbear...mwexec()[2018/06/26 22:31:13]: kill -9 798 [ OK ] starting php based setup routines step 3 * Starting daemon update Hosts File... mwexec()[2018/06/26 22:31:13]: /usr/sbin/hostd 7200 [ OK ] * Starting mount of remote shares... * Finishing mount shares... [ OK ] * Starting AFP Service... mwexec()[2018/06/26 22:31:13]: /usr/bin/rm -f /rw_fs/tmp/usr/var/netatalk mwexec()[2018/06/26 22:31:13]: /usr/bin/ln -s /share/1100/netatalk /rw_fs/tmp/usr/var/netatalk mwexec()[2018/06/26 22:31:13]: /usr/bin/mkdir -p /rw_fs/tmp/var/run/dbus mwexec()[2018/06/26 22:31:13]: /usr/bin/touch /usr/etc/afp.conf mwexec()[2018/06/26 22:31:13]: /usr/bin/chmod a+w /usr/etc/afp.conf mwexec()[2018/06/26 22:31:13]: /usr/bin/chmod 655 /usr/etc/afp.conf mwexec()[2018/06/26 22:31:14]: /usr/bin/dbus-daemon --config-file=/etc/dbus-1/system.conf mwexec()[2018/06/26 22:31:14]: /usr/sbin/avahi-daemon -D [ FAIL ] mwexec()[2018/06/26 22:31:34]: unlink /direct-usb mwexec()[2018/06/26 22:31:34]: ln -s /share/1100 /direct-usb mwexec()[2018/06/26 22:31:34]: /bin/chmod 777 /var/spool/mqueue mwexec()[2018/06/26 22:31:34]: /bin/chown 0:0 /var/spool/mqueue mwexec()[2018/06/26 22:31:34]: /bin/chmod 777 /var/spool/clientmqueue mwexec()[2018/06/26 22:31:34]: /bin/chown 0:0 /var/spool/clientmqueue * Starting Transmission Client... mwexec()[2018/06/26 22:31:34]: sh -c "export EVENT_NOEPOLL=1 && /usr/bin/nice -n 10 /usr/local/bin/transmission-daemon -g /share/1100/tr-daemon -w '/share/1100/tr-downloads'" [ OK ] * Starting MlDonkey Server... mwexec()[2018/06/26 22:31:34]: unlink /share/1100/mldonkey/*.tmp mwexec()[2018/06/26 22:31:34]: unlink /share/1100/mldonkey/mlnet_tmp/*.tmp mwexec()[2018/06/26 22:31:34]: unlink /share/1100/mldonkey/mlnet.pid mwexec()[2018/06/26 22:31:34]: unlink '/.mldonkey' mwexec()[2018/06/26 22:31:34]: ln -s '/share/1100/mldonkey' '/.mldonkey' mwexec_bg()[2018/06/26 22:31:34]: /bin/busybox setsid /usr/local/sbin/mlnet mwexec_bg()[2018/06/26 22:31:35]: /bin/busybox setsid sh /usr/bin/openport open MLdonkey [ OK ] starting php based setup routines step banner *** fvdw-sl NAS firmware This is fvdw-sl version: fvdw-sl 17.0 patched built on: May 28 2017 LAN IP address: 10.0.1.10 (static) Port configuration: LAN -> eth0 php based setup routines finished web permission on resolv.conf set device tuning for dms performance move smbd en nmbd db files away from ram disk to prevent hanging samba server LED settings else loop1 finished rcS finished root@Storage:/ #

Code: Select all: root@Storage:/ # mount /dev/sda7 on / type ext3 (rw,relatime,data=ordered) none on /proc type proc (rw,relatime) none on /sys type sysfs (rw,relatime) none on /dev/pts type devpts (rw,relatime,mode=600) /dev/sda5 on /rw_fs type ext3 (rw,noatime,data=ordered) tmpfs on /rw_fs/tmp/usr/var type tmpfs (rw,relatime,size=5000k) nfsd on /proc/fs/nfsd type nfsd (rw,relatime) /dev/md0 on /share/1100 type ext4 (rw,noatime,nodelalloc,stripe=256,data=ordered) root@Storage:/ #

Code: Select all: root@Storage:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #26 PREEMPT Sat Feb 17 11:24:54 CET 2018 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie d2 Network v2 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c0970058, node_mem_map cfdfa000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro reset=0 productType=PRO_KW [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 249788K/262144K available (7142K kernel code, 333K rwdata, 1956K rodata, 204K init, 395K bss, 12356K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc08eaca4 (9100 kB) [ 0.000000] .init : 0xc08eb000 - 0xc091e000 ( 204 kB) [ 0.000000] .data : 0xc091e000 - 0xc0971560 ( 334 kB) [ 0.000000] .bss : 0xc0971560 - 0xc09d4324 ( 396 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:114 [ 0.000000] Switching to timer-based delay loop, resolution 6ns [ 0.000009] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 4.432795] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 4.433089] Console: colour dummy device 80x30 [ 4.433119] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 4.433141] pid_max: default: 32768 minimum: 301 [ 4.433285] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 4.433304] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 4.433917] CPU: Testing write buffer coherency: ok [ 4.434302] Setting up static identity map for 0x81e0 - 0x8238 [ 4.437576] VFP support v0.3: not present [ 4.438045] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 4.438181] xor: measuring software checksum speed [ 4.533073] arm4regs : 1088.800 MB/sec [ 4.632870] 8regs : 653.600 MB/sec [ 4.732871] 32regs : 904.800 MB/sec [ 4.732888] xor: using function: arm4regs (1088.800 MB/sec) [ 4.732928] pinctrl core: initialized pinctrl subsystem [ 4.733846] NET: Registered protocol family 16 [ 4.734390] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 4.737239] Kirkwood: MV88F6281-A0, TCLK=166666667. [ 4.737270] Feroceon L2: Enabling L2 [ 4.737310] Feroceon L2: Cache support initialised. [ 4.738923] kirkwood_init: create proc tsinfo proc [ 4.738948] tsinfo: create proc tsinfo vendor successfully [ 4.738956] mv_usb_init 1 [ 4.738968] mv_usb_init 2 devnum = 0 [ 4.738979] init function mv_usb_init finished [ 4.738988] initial MPP regs: 01112222 00003311 00551100 00000000 00000000 00000000 00000000 [ 4.739019] final MPP regs: 01112222 00003311 00551100 00000000 00000000 00000000 00000000 [ 4.739471] orion-ehci registered [ 4.740785] orion_gpio_is_valid: invalid GPIO 7 [ 4.741349] Kirkwood PCIe port 0: link down [ 4.741361] Kirkwood PCIe port 1: link up [ 4.741371] PCI: bus0 uses PCIe port 0 [ 4.741614] PCI host bridge to bus 0000:00 [ 4.741637] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] [ 4.741651] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 4.741663] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 4.741703] pci 0000:00:00.0: [11ab:6281] type 00 class 0x058000 [ 4.741735] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref] [ 4.741752] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0fffffff] [ 4.741818] pci 0000:00:00.0: supports D1 D2 [ 4.742075] PCI: bus0: Fast back to back transfers disabled [ 4.742093] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 4.742104] PCI: bus1 uses PCIe port 1 [ 4.742339] PCI host bridge to bus 0000:01 [ 4.742358] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff] [ 4.742371] pci_bus 0000:01: root bus resource [io 0x10000-0x1ffff] [ 4.742383] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff] [ 4.742414] PCI: bus1: Fast back to back transfers enabled [ 4.742428] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 4.963429] raid6: int32x1 gen() 101 MB/s [ 5.133117] raid6: int32x1 xor() 63 MB/s [ 5.303193] raid6: int32x2 gen() 133 MB/s [ 5.472904] raid6: int32x2 xor() 84 MB/s [ 5.642921] raid6: int32x4 gen() 133 MB/s [ 5.813049] raid6: int32x4 xor() 90 MB/s [ 5.982933] raid6: int32x8 gen() 121 MB/s [ 6.152983] raid6: int32x8 xor() 80 MB/s [ 6.152993] raid6: using algorithm int32x2 gen() 133 MB/s [ 6.153002] raid6: .... xor() 84 MB/s, rmw enabled [ 6.153009] raid6: using intx1 recovery algorithm [ 6.153338] vgaarb: loaded [ 6.153812] SCSI subsystem initialized [ 6.154107] libata version 3.00 loaded. [ 6.154671] usbcore: registered new interface driver usbfs [ 6.154811] usbcore: registered new interface driver hub [ 6.154927] usbcore: registered new device driver usb [ 6.155202] Linux video capture interface: v2.00 [ 6.158673] clocksource: Switched to clocksource orion_clocksource [ 6.158846] VFS: Disk quotas dquot_6.6.0 [ 6.158907] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 6.175296] NET: Registered protocol family 2 [ 6.176000] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 6.176041] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 6.176076] TCP: Hash tables configured (established 2048 bind 2048) [ 6.176151] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 6.176177] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 6.176375] NET: Registered protocol family 1 [ 6.177254] RPC: Registered named UNIX socket transport module. [ 6.177267] RPC: Registered udp transport module. [ 6.177275] RPC: Registered tcp transport module. [ 6.177283] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.177320] PCI: CLS 32 bytes, default 32 [ 6.177567] NetWinder Floating Point Emulator V0.97 (double precision) [ 6.178893] futex hash table entries: 256 (order: -1, 3072 bytes) [ 6.179455] workingset: timestamp_bits=29 max_order=16 bucket_order=0 [ 6.180340] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 6.180685] ntfs: driver 2.1.32 [Flags: R/W]. [ 6.180739] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 6.180925] fuse init (API version 7.24) [ 6.181279] JFS: nTxBlock = 1951, nTxLock = 15611 [ 6.182347] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 6.187218] async_tx: api initialized (async) [ 6.187322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 6.187341] io scheduler noop registered [ 6.187356] io scheduler deadline registered [ 6.187388] io scheduler cfq registered (default) [ 6.187626] mv_xor mv_xor.0: Marvell shared XOR driver [ 6.223572] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy ) [ 6.225437] mv_xor mv_xor.1: Marvell shared XOR driver [ 6.263503] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy ) [ 6.271762] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 6.273487] console [ttyS0] disabled [ 6.293615] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A [ 6.960652] console [ttyS0] enabled [ 6.980222] brd: module loaded [ 6.991251] loop: module loaded [ 6.995696] sata_mv sata_mv.0: version 1.28 [ 6.995771] sata_mv sata_mv.0: cannot get optional clkdev [ 7.001249] sata_mv sata_mv.0: slots 32 ports 2 [ 7.009875] scsi host0: sata_mv [ 7.013798] scsi host1: sata_mv [ 7.017346] ata1: SATA max UDMA/133 irq 21 [ 7.021425] ata2: SATA max UDMA/133 irq 21 [ 7.027371] m25p80 spi0.0: mx25l4005a (512 Kbytes) [ 7.033175] Creating 2 MTD partitions on "spi_flash": [ 7.038211] 0x000000000000-0x00000007d000 : "u-boot" [ 7.044491] 0x00000007e000-0x00000007f000 : "u-boot-env" [ 7.052486] tun: Universal TUN/TAP device driver, 1.6 [ 7.058396] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 7.064845] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 7.073338] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 7.089471] libphy: orion_mdio_bus: probed [ 7.093784] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 7.512854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 7.532945] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA3MA, max UDMA/133 [ 7.539879] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.592895] ata1.00: configured for UDMA/133 [ 7.623107] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 A3MA PQ: 0 ANSI: 5 [ 7.683294] fvdw1 disk index before get_sd_name = 0 [ 7.688146] device-name= sata_mv [ 7.691359] fvdw2 disk index after get_sd_name = 0 [ 7.712857] fvdw3 prefix[0]=s prefix[1]=d [ 7.716935] fvdw4 diskname = sda [ 7.722998] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 7.732679] sd 0:0:0:0: [sda] Write Protect is off [ 7.737559] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.737691] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.786116] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 7.804310] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.263088] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:8f:7d:a0 [ 8.272016] PPP generic driver version 2.4.2 [ 8.276582] PPP Deflate Compression module registered [ 8.281629] PPP MPPE Compression module registered [ 8.286546] NET: Registered protocol family 24 [ 8.291149] usbcore: registered new interface driver rt2500usb [ 8.297057] ata2: SATA link down (SStatus 0 SControl F300) [ 8.297069] ata2.00: link offline, clearing class 1 to NONE [ 8.302793] usbcore: registered new interface driver rt73usb [ 8.308695] usbcore: registered new interface driver rt2800usb [ 8.314725] usbcore: registered new interface driver rtl8187 [ 8.320595] usbcore: registered new interface driver rtl8192cu [ 8.326450] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 8.333965] usbcore: registered new interface driver pegasus [ 8.339821] usbcore: registered new interface driver asix [ 8.345381] usbcore: registered new interface driver ax88179_178a [ 8.351648] usbcore: registered new interface driver cdc_ether [ 8.357637] usbcore: registered new interface driver net1080 [ 8.363493] usbcore: registered new interface driver plusb [ 8.369153] usbcore: registered new interface driver cdc_subset [ 8.375199] usbcore: registered new interface driver zaurus [ 8.380987] usbcore: registered new interface driver ipheth [ 8.386710] usbcore: registered new interface driver cdc_ncm [ 8.393323] aoe: cannot create debugfs directory [ 8.398268] aoe: AoE v85 initialised. [ 8.402464] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 8.408662] i2c /dev entries driver [ 8.413409] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write [ 8.420461] uvcvideo: Unable to create debugfs directory [ 8.425980] usbcore: registered new interface driver uvcvideo [ 8.431695] USB Video Class driver (1.1.1) [ 8.435916] gspca_main: v2.14.0 registered [ 8.440131] usbcore: registered new interface driver Philips webcam [ 8.446846] md: linear personality registered for level -1 [ 8.452307] md: raid0 personality registered for level 0 [ 8.457809] md: raid1 personality registered for level 1 [ 8.463141] md: raid10 personality registered for level 10 [ 8.468841] md: raid6 personality registered for level 6 [ 8.474230] md: raid5 personality registered for level 5 [ 8.479518] md: raid4 personality registered for level 4 [ 8.485127] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 8.493862] device-mapper: multipath: version 1.11.0 loaded [ 8.499416] device-mapper: multipath round-robin: version 1.1.0 loaded [ 8.505967] device-mapper: multipath queue-length: version 0.2.0 loaded [ 8.512555] device-mapper: multipath service-time: version 0.3.0 loaded [ 8.519229] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 8.525339] device-mapper: raid: Loading target version 1.7.0 [ 8.531230] orion_gpio_is_valid: invalid GPIO 12 [ 8.532543] Netfilter messages via NETLINK v0.30. [ 8.537782] nfnl_acct: registering with nfnetlink. [ 8.542588] nf_conntrack version 0.5.0 (3902 buckets, 15608 max) [ 8.549289] ipip: IPv4 over IPv4 tunneling driver [ 8.555084] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.560602] NET: Registered protocol family 10 [ 8.566336] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 8.571961] sit: IPv6 over IPv4 tunneling driver [ 8.577503] NET: Registered protocol family 17 [ 8.581980] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 8.594727] Bridge firewalling registered [ 8.598859] NET: Registered protocol family 5 [ 8.604545] console [netcon0] enabled [ 8.608193] netconsole: network logging started [ 8.613486] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 8.620600] rtc-mv rtc-mv: setting system clock to 2018-06-26 20:29:55 UTC (1530044995) [ 8.629057] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 8.658858] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem [ 8.666637] EXT4-fs (sda7): INFO: recovery required on readonly filesystem [ 8.673529] EXT4-fs (sda7): write access will be enabled during recovery [ 8.733341] EXT4-fs (sda7): recovery complete [ 8.752915] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 8.760568] VFS: Mounted root (ext3 filesystem) readonly on device 8:7. [ 8.767826] Freeing unused kernel memory: 204K (c08eb000 - c091e000) [ 8.774164] This architecture does not have kernel memory protection. [ 9.105499] EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended [ 9.142933] EXT4-fs (sda7): re-mounted. Opts: (null) [ 9.553521] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen [ 9.560895] ata2: edma_err_cause=00000010 pp_flags=00000000, dev connect [ 9.567857] ata2: SError: { PHYRdyChg DevExch } [ 9.573346] ata2: hard resetting link [ 9.860670] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.868048] ehci-orion: EHCI orion driver [ 9.872141] orion-ehci orion-ehci.0: EHCI Host Controller [ 9.877621] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 9.885342] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 9.902853] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 9.908912] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.915702] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.922907] usb usb1: Product: EHCI Host Controller [ 9.927766] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd [ 9.933066] usb usb1: SerialNumber: orion-ehci.0 [ 9.938277] hub 1-0:1.0: USB hub found [ 9.942041] hub 1-0:1.0: 1 port detected [ 9.960653] usbcore: registered new interface driver usb-storage [ 9.978587] usbcore: registered new interface driver usblp [ 10.011182] Loading iSCSI transport class v2.0-870. [ 10.021317] iscsi: registered transport (tcp) [ 10.262886] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 10.313512] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [ 10.403155] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended [ 10.415601] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610 [ 10.422285] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.429694] EXT4-fs (sda5): recovery complete [ 10.434213] usb 1-1: Product: USB2.0 Hub [ 10.438123] usb 1-1: Manufacturer: GenesysLogic [ 10.443139] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 10.451007] hub 1-1:1.0: USB hub found [ 10.454804] hub 1-1:1.0: 4 ports detected [ 10.578610] random: mkswap urandom read with 75 bits of entropy available [ 10.638893] Adding 524284k swap on /dev/sda3. Priority:-1 extents:1 across:524284k [ 12.272921] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 12.303019] ata2.00: ATA-6: LaCie d2Next-Quadra, 1AQ10001, max UDMA/133 [ 12.309783] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 12.353029] ata2.00: configured for UDMA/133 [ 12.357308] ata2: EH complete [ 12.363224] scsi 1:0:0:0: Direct-Access ATA LaCie d2Next-Q 0001 PQ: 0 ANSI: 5 [ 12.433332] fvdw1 disk index before get_sd_name = 1 [ 12.438196] device-name= sata_mv [ 12.441407] external disk assign prefix letter e [ 12.446773] fvdw2 disk index after get_sd_name = 6 [ 12.452556] fvdw3 prefix[0]=s prefix[1]=e [ 12.458617] fvdw4 diskname = seg [ 12.473182] sd 1:0:0:0: [seg] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 12.481420] sd 1:0:0:0: [seg] Write Protect is off [ 12.492869] sd 1:0:0:0: [seg] Mode Sense: 00 3a 00 00 [ 12.493011] sd 1:0:0:0: [seg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.518256] seg: seg1 [ 12.523322] sd 1:0:0:0: [seg] Attached SCSI disk [ 15.553148] random: nonblocking pool is initialized [ 19.192851] usb 1-1.3: new high-speed USB device number 3 using orion-ehci [ 19.322873] usb 1-1.3: New USB device found, idVendor=059f, idProduct=1014 [ 19.329722] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 19.337023] usb 1-1.3: Product: d2 quadra (button) [ 19.341798] usb 1-1.3: Manufacturer: LaCie [ 19.345889] usb 1-1.3: SerialNumber: 00D04B920B07FFA3 [ 19.356051] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 19.362578] scsi host2: usb-storage 1-1.3:1.0 [ 21.052849] usb 1-1.4: new high-speed USB device number 4 using orion-ehci [ 21.182874] usb 1-1.4: New USB device found, idVendor=059f, idProduct=1014 [ 21.189723] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 21.197023] usb 1-1.4: Product: d2 quadra (button) [ 21.201791] usb 1-1.4: Manufacturer: LaCie [ 21.205882] usb 1-1.4: SerialNumber: 00D04B871E04B9D2 [ 21.216047] usb-storage 1-1.4:1.0: USB Mass Storage device detected [ 21.222500] scsi host3: usb-storage 1-1.4:1.0 [ 22.688191] udevd (937): /proc/937/oom_adj is deprecated, please use /proc/937/oom_score_adj instead. [ 22.697529] udev: starting version 130 [ 23.313384] input: LaCie d2 quadra (button) as /devices/platform/orion-ehci.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:059F:1014.0001/input/input1 [ 23.473268] hid-generic 0003:059F:1014.0001: input: USB HID v1.11 Device [LaCie d2 quadra (button)] on usb-orion-ehci.0-1.3/input1 [ 23.536486] input: LaCie d2 quadra (button) as /devices/platform/orion-ehci.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:059F:1014.0002/input/input2 [ 23.673248] hid-generic 0003:059F:1014.0002: input: USB HID v1.11 Device [LaCie d2 quadra (button)] on usb-orion-ehci.0-1.4/input1 [ 23.736516] usbcore: registered new interface driver usbhid [ 23.742071] usbhid: USB HID core driver [ 24.404855] scsi 2:0:0:0: Direct-Access LaCie d2 quadra PQ: 0 ANSI: 4 [ 24.421938] fvdw1 disk index before get_sd_name = 2 [ 24.482700] device-name= usb-storage [ 24.499518] external disk assign prefix letter e [ 24.514801] fvdw2 disk index after get_sd_name = 7 [ 24.519575] fvdw3 prefix[0]=s prefix[1]=e [ 24.525430] fvdw4 diskname = seh [ 24.533042] sd 2:0:0:0: [seh] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 24.562156] sd 2:0:0:0: [seh] Write Protect is off [ 24.583018] sd 2:0:0:0: [seh] Mode Sense: 10 00 00 00 [ 24.584022] sd 2:0:0:0: [seh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.235190] scsi 3:0:0:0: Direct-Access LaCie d2 quadra PQ: 0 ANSI: 4 [ 26.245777] fvdw1 disk index before get_sd_name = 3 [ 26.250635] device-name= usb-storage [ 26.270983] external disk assign prefix letter e [ 26.275662] fvdw2 disk index after get_sd_name = 8 [ 26.280432] fvdw3 prefix[0]=s prefix[1]=e [ 26.284557] fvdw4 diskname = sei [ 26.292309] sd 3:0:0:0: [sei] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 26.306768] sd 3:0:0:0: [sei] Write Protect is off [ 26.311555] sd 3:0:0:0: [sei] Mode Sense: 10 00 00 00 [ 26.314188] sd 3:0:0:0: [sei] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.350548] sei: sei1 [ 26.359879] sd 3:0:0:0: [sei] Attached SCSI disk [ 45.590757] sd 2:0:0:0: [seh] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 45.598934] sd 2:0:0:0: [seh] tag#0 Sense Key : 0x3 [current] [ 45.604761] sd 2:0:0:0: [seh] tag#0 ASC=0x4b ASCQ=0x0 [ 45.609884] sd 2:0:0:0: [seh] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00 [ 45.617441] blk_update_request: I/O error, dev seh, sector 0 [ 45.623085] Buffer I/O error on dev seh, logical block 0, async page read [ 70.356122] sd 2:0:0:0: [seh] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 70.364298] sd 2:0:0:0: [seh] tag#0 Sense Key : 0x3 [current] [ 70.370108] sd 2:0:0:0: [seh] tag#0 ASC=0x4b ASCQ=0x0 [ 70.375252] sd 2:0:0:0: [seh] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00 [ 70.382788] blk_update_request: I/O error, dev seh, sector 0 [ 70.388442] Buffer I/O error on dev seh, logical block 0, async page read [ 70.395244] seh: unable to read partition table [ 70.579461] md: md0 stopped. [ 70.587154] sd 2:0:0:0: [seh] Attached SCSI disk [ 70.616185] md: bind<seg1> [ 70.623484] md: bind<sda8> [ 70.664845] md/raid0:md0: md_size is 7808103424 sectors. [ 70.670137] md: RAID0 configuration for md0 - 2 zones [ 70.682898] md: zone0=[sda8/seg1] [ 70.686225] zone-offset= 0KB, device-offset= 0KB, size=3901224960KB [ 70.712890] md: zone1=[seg1] [ 70.715774] zone-offset=3901224960KB, device-offset=1950612480KB, size= 2826752KB [ 70.743387] md0: detected capacity change from 0 to 3997748953088 [ 74.481571] EXT4-fs (md0): warning: mounting fs with errors, running e2fsck is recommended [ 75.370860] EXT4-fs (md0): recovery complete [ 75.402942] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: user_xattr,acl,nodelalloc [ 77.934560] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 77.940646] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 80.254443] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 80.264291] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 376.182922] EXT4-fs (md0): error count since last fsck: 2 [ 376.188306] EXT4-fs (md0): initial error at time 1528631181: ext4_journal_check_start:56 [ 376.196382] EXT4-fs (md0): last error at time 1528631181: ext4_journal_check_start:56 root@Storage:/ #

Code: Select all: root@Storage:/ # cat /var/log/messages Jun 26 22:30:09 kirkwood-4 syslog.info syslogd started: BusyBox v1.21.0 Jun 26 22:30:11 kirkwood-4 local0.warn API[2018/06/26 22:30:11] nasapi.inc(36)[1042]: nasapi: lock time = 0 Jun 26 22:30:11 kirkwood-4 local0.warn API[2018/06/26 22:30:11] nasapi.inc(49)[1042]: calling 'mrvlUdevdeSatanoflushUP seg' Jun 26 22:30:11 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/is_esata seg Jun 26 22:30:11 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/lsscsi -t Jun 26 22:30:11 kirkwood-4 local0.warn API[2018/06/26 22:30:11] nasapi.inc(471)[1042]: mrvlUdevdeSatanoflushUP Return Code: 0 Jun 26 22:30:12 kirkwood-4 local0.warn API[2018/06/26 22:30:12] nasapi.inc(36)[1286]: nasapi: lock time = 0 Jun 26 22:30:12 kirkwood-4 local0.warn API[2018/06/26 22:30:12] nasapi.inc(49)[1286]: calling 'mrvlUdevdAttachedeSata seg1' Jun 26 22:30:12 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/cat /etc/platform Jun 26 22:30:12 kirkwood-4 local0.warn API[2018/06/26 22:30:12] udevfunc_attached.finc(35)[1286]: Request to attach seg1 for d2nw2 Jun 26 22:30:12 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/vol_id -t /dev/seg1 Jun 26 22:30:12 kirkwood-4 local0.warn API[2018/06/26 22:30:12] exthddfunc_mountEsataHdd.finc(22)[1286]: Request to mount for seg1 Jun 26 22:30:12 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ata_id -x /dev/seg Jun 26 22:30:12 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/vol_id -l /dev/seg1 Jun 26 22:30:12 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/mdadm --examine --brief /dev/seg1 Jun 26 22:30:13 kirkwood-4 local0.warn API[2018/06/26 22:30:13] nasapi.inc(471)[1286]: mrvlUdevdAttachedeSata Return Code: 0 Jun 26 22:30:13 kirkwood-4 local0.warn API[2018/06/26 22:30:13] nasapi.inc(36)[1317]: nasapi: lock time = 0 Jun 26 22:30:13 kirkwood-4 local0.warn API[2018/06/26 22:30:13] nasapi.inc(49)[1317]: calling 'mrvlUdevdeSatanoflushUP sei' Jun 26 22:30:13 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/is_esata sei Jun 26 22:30:13 kirkwood-4 local0.warn API[2018/06/26 22:30:13] nasapi.inc(471)[1317]: mrvlUdevdeSatanoflushUP Return Code: 0 Jun 26 22:30:13 kirkwood-4 local0.warn API[2018/06/26 22:30:13] nasapi.inc(36)[1334]: nasapi: lock time = 0 Jun 26 22:30:14 kirkwood-4 local0.warn API[2018/06/26 22:30:14] nasapi.inc(49)[1334]: calling 'mrvlUdevdAttached sei1' Jun 26 22:30:14 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/cat /etc/platform Jun 26 22:30:14 kirkwood-4 local0.warn API[2018/06/26 22:30:14] udevfunc_attached.finc(35)[1334]: Request to attach sei1 for d2nw2 Jun 26 22:30:14 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/vol_id -t /dev/sei1 Jun 26 22:30:14 kirkwood-4 local0.warn API[2018/06/26 22:30:14] exthddfunc_mountUsbRpiHdd.finc(22)[1334]: Request to mount for sei1 Jun 26 22:30:14 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/usb_id -x /block/sei Jun 26 22:30:14 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/vol_id -l /dev/sei1 Jun 26 22:30:14 kirkwood-4 local0.warn API[2018/06/26 22:30:14] nasapi.inc(471)[1334]: mrvlUdevdAttached Return Code: 0 Jun 26 22:30:57 kirkwood-4 local0.warn API[2018/06/26 22:30:57] nasapi.inc(36)[1384]: nasapi: lock time = 0 Jun 26 22:30:57 kirkwood-4 local0.warn API[2018/06/26 22:30:57] nasapi.inc(49)[1384]: calling 'mrvlUdevdeSatanoflushUP seh' Jun 26 22:30:57 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/is_esata seh Jun 26 22:30:57 kirkwood-4 local0.warn API[2018/06/26 22:30:57] nasapi.inc(471)[1384]: mrvlUdevdeSatanoflushUP Return Code: 0 Jun 26 22:30:57 kirkwood-4 local0.warn API[2018/06/26 22:30:57] dm_restore_md.finc(38)[918]: Failed during MD Assembly [/dev/md2] Jun 26 22:30:57 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/lsscsi -t Jun 26 22:30:58 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/ata_id -x /dev/sda Jun 26 22:30:58 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/cat /sys/block/sda/sda8/size Jun 26 22:30:58 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/mdadm --examine --brief /dev/sda8 Jun 26 22:30:58 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/mdadm --detail /dev/md0 Jun 26 22:30:58 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/mdadm --examine --brief /dev/seg1 Jun 26 22:30:58 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/mdadm --detail /dev/md0 Jun 26 22:30:58 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/mdadm --examine --brief /dev/sei1 Jun 26 22:30:58 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/vol_id -l /dev/sei1 Jun 26 22:30:58 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/mdadm --detail --scan Jun 26 22:30:58 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/sbin/blkid -o value -s TYPE /dev/md0 Jun 26 22:31:03 kirkwood-4 daemon.err ata_id[1485]: HDIO_GET_IDENTITY failed for '/dev/sei' Jun 26 22:31:03 kirkwood-4 local0.warn API[2018/06/26 22:31:03] exthddfunc_wait_allmountExtHdd.finc(65)[918]: Found an orphan disk sei Jun 26 22:31:05 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/usr/htdocs ; USER=root ; COMMAND=/sbin/is_esata seg Jun 26 22:31:06 kirkwood-4 user.info noflushd: noflushd 2.8 fvdw version 18 jun 2015 started Jun 26 22:31:12 kirkwood-4 auth.err passwd: can't create '/etc/passwd+': File exists Jun 26 22:31:12 kirkwood-4 auth.err passwd: can't update password file /etc/passwd Jun 26 22:31:12 kirkwood-4 local0.warn API[2018/06/26 22:31:12] userfunc_users_commit.finc(126)[918]: userfunc_commit_user: failed changing unix user password! Jun 26 22:31:12 kirkwood-4 local0.warn API[2018/06/26 22:31:12] nasapi.inc(36)[1562]: nasapi: lock time = 0 Jun 26 22:31:12 kirkwood-4 local0.warn API[2018/06/26 22:31:12] nasapi.inc(49)[1562]: calling 'mrvlDropbearStart' Jun 26 22:31:12 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 777 /rw_fs/.ssh Jun 26 22:31:12 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 700 /rw_fs/.ssh Jun 26 22:31:12 kirkwood-4 authpriv.warn dropbear[1576]: Failed loading /etc/dropbear/dropbear_dss_host_key Jun 26 22:31:12 kirkwood-4 authpriv.warn dropbear[1576]: Failed loading /etc/dropbear/dropbear_ecdsa_host_key Jun 26 22:31:12 kirkwood-4 authpriv.info dropbear[1577]: Running in background Jun 26 22:31:12 kirkwood-4 authpriv.info dropbear[1580]: Child connection from 10.0.1.235:49236 Jun 26 22:31:13 kirkwood-4 authpriv.notice sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/ps -ef Jun 26 22:31:13 kirkwood-4 local0.warn API[2018/06/26 22:31:13] nasapi.inc(471)[1562]: mrvlDropbearStart Return Code: 0 Jun 26 22:31:13 kirkwood-4 authpriv.notice dropbear[1580]: Password auth succeeded for 'root' from 10.0.1.235:49236 Jun 26 22:31:13 kirkwood-4 local0.warn API[2018/06/26 22:31:13] nasapi.inc(36)[1588]: nasapi: lock time = 0 Jun 26 22:31:13 kirkwood-4 local0.warn API[2018/06/26 22:31:13] nasapi.inc(49)[1588]: calling 'mrvlNfsRestart 0' Jun 26 22:31:13 kirkwood-4 local0.warn API[2018/06/26 22:31:13] nasapi.inc(471)[1588]: mrvlNfsRestart Return Code: Jun 26 22:31:13 kirkwood-4 user.info hostd: host daemon V2 started Jun 26 22:31:13 kirkwood-4 user.info hostd: updating hosts file, next update in 7200 seconds when disk remains active Jun 26 22:31:14 kirkwood-4 daemon.err avahi-daemon[1639]: Failed to find group 'avahi'. Jun 26 22:31:22 kirkwood-4 syslog.info syslogd exiting root@Storage:/ #

Code: Select all: root@Storage:/ # grep 'usbmountmode' /etc/nas_conf_db.xml <usbmountmode>internal</usbmountmode>

by **Jocko** » Tue Jun 26, 2018 7:18 pm

Hummm
There are several errors and not only with your USB disk

1/ The firmware failed to restore the linux user accounts

Code: Select all: * Configuring System Users... Root password: use default password Set users, set users password [ Fail ]

and with this error afp server fails to start rightly

Code: Select all: * Starting AFP Service... mwexec()[2018/06/26 22:31:13]: /usr/bin/rm -f /rw_fs/tmp/usr/var/netatalk mwexec()[2018/06/26 22:31:13]: /usr/bin/ln -s /share/1100/netatalk /rw_fs/tmp/usr/var/netatalk mwexec()[2018/06/26 22:31:13]: /usr/bin/mkdir -p /rw_fs/tmp/var/run/dbus mwexec()[2018/06/26 22:31:13]: /usr/bin/touch /usr/etc/afp.conf mwexec()[2018/06/26 22:31:13]: /usr/bin/chmod a+w /usr/etc/afp.conf mwexec()[2018/06/26 22:31:13]: /usr/bin/chmod 655 /usr/etc/afp.conf mwexec()[2018/06/26 22:31:14]: /usr/bin/dbus-daemon --config-file=/etc/dbus-1/system.conf mwexec()[2018/06/26 22:31:14]: /usr/sbin/avahi-daemon -D [ FAIL ]

This because some user accounts are missing

Code: Select all: Jun 26 22:31:14 kirkwood-4 daemon.err avahi-daemon[1639]: Failed to find group 'avahi'.

all these issues seems to happen because there is an orphan file

Code: Select all: Jun 26 22:31:12 kirkwood-4 auth.err passwd: can't create '/etc/passwd+': File exists Jun 26 22:31:12 kirkwood-4 auth.err passwd: can't update password file /etc/passwd

2/ You have an hardware issue with your disk seh

Code: Select all: [ 45.590757] sd 2:0:0:0: [seh] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 45.598934] sd 2:0:0:0: [seh] tag#0 Sense Key : 0x3 [current] [ 45.604761] sd 2:0:0:0: [seh] tag#0 ASC=0x4b ASCQ=0x0 [ 45.609884] sd 2:0:0:0: [seh] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00 [ 45.617441] blk_update_request: I/O error, dev seh, sector 0 [ 45.623085] Buffer I/O error on dev seh, logical block 0, async page read [ 70.356122] sd 2:0:0:0: [seh] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 70.364298] sd 2:0:0:0: [seh] tag#0 Sense Key : 0x3 [current] [ 70.370108] sd 2:0:0:0: [seh] tag#0 ASC=0x4b ASCQ=0x0 [ 70.375252] sd 2:0:0:0: [seh] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00 [ 70.382788] blk_update_request: I/O error, dev seh, sector 0 [ 70.388442] Buffer I/O error on dev seh, logical block 0, async page read [ 70.395244] seh: unable to read partition table

So an error on the sector 0 :? . it is why seh1 is not detected

3/ seems also sei1 is also no longer detected

Code: Select all: Jun 26 22:31:03 kirkwood-4 local0.warn API[2018/06/26 22:31:03] exthddfunc_wait_allmountExtHdd.finc(65)[918]: Found an orphan disk sei

with this message, the firmware removes disk settings for sei in the nas database whereas it was detected at the first boot steps :scratch

So first step, is to fix the user accounts issues:
Do

Code: Select all: df /dev/sda7 chmod 777 /etc rm -f /etc/passwd+

(pleae to post the outputs)
and reboot the nas (I assume you still have the debug mode) but without the disk seh
then post

Code: Select all: dmesg mount cat /boot.log cat /var/log/messages

plugout.net

Again. USB disks can not be initialized

Again. USB disks can not be initialized

Re: Again. USB disks can not be initialized

Re: Again. USB disks can not be initialized

Re: Again. USB disks can not be initialized

Re: Again. USB disks can not be initialized

Re: Again. USB disks can not be initialized

Re: Again. USB disks can not be initialized

Re: Again. USB disks can not be initialized

Re: Again. USB disks can not be initialized

Re: Again. USB disks can not be initialized

Who is online