This time, I think the issue is fixed.
I also understand why sda8 was unformatted even if mke2fs aborts. It is an error in my format script which destroys the fs before running the format command. Now I added a test to check if the partition is not yet mounted.
To install the new file, use the same workaround :
* go to the firmware upgrade menu, click on the small button '+' :
* upload the attached file (step1) but do not run step2
* open a shell terminal and do
- Code: Select all
cd /tmp
mv firmware.bin fvdw-sl-17-x-reset-disk-fix-24feb18.tar.gz
tar -xf fvdw-sl-17-x-reset-disk-fix-24feb18.tar.gz -C /
Then reboot the NAS.
Go to the disk setup menu, you should see again your Disk-A and a volume Vol-A. But this one is no longer formatted. So you need to run either a reset job on the disk or a format job on the volume Vol-A.
After running this job and rebooting the nas, post these outputs to check if all is now right
- Code: Select all
mount
file -bs /dev/sda8
/etc/api/nasapi.php "mrvlGetDisk high all"
/etc/api/nasapi.php "mrvlGetVolume high all"
cat /etc/.setup.fs/setupjob.log
And ensure to disable the debug mode (performance issue)
- Code: Select all
debugoff
You do not have the required permissions to view the files attached to this post.