by Cricrou59 » Tue Jun 18, 2019 6:12 pm
Hi,
I've just wait a while to do something else and now i'v this report :
Marvell Serial ATA Adapter
Found adapter at bus 1, device 7 ... Scanning channels
[0 4]: failed to perform ATA Identify command
Failed initializing storage deivce connected to SATA channel 4
Marvell>> ide reset
ide reset
Reset IDE:
Marvell Serial ATA Adapter
Found adapter at bus 1, device 7 ... Scanning channels
Device 0: OK
Model: WDC WD20EFRX-68EUZN0 Firm: 82.00A82 Ser#: WD-WCC
4M3DFZATE
Type: Hard Disk
Supports 48-bit addressing
Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
Device 1: OK
Model: WDC WD20EFRX-68EUZN0 Firm: 80.00A80 Ser#: WD-WMC
4M1213158
Type: Hard Disk
Supports 48-bit addressing
Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
Device 2: OK
Model: WDC WD20EFRX-68AX9N0 Firm: 80.00A80 Ser#: WD-WMC
300463460
Type: Hard Disk
Supports 48-bit addressing
Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
Device 3: OK
Model: WDC WD20EFRX-68AX9N0 Firm: 80.00A80 Ser#: WD-WMC
300371936
Type: Hard Disk
Supports 48-bit addressing
Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
Device 4: OK
Model: WDC WD20EFRX-68EUZN0 Firm: 82.00A82 Ser#: WD-WCC
4M0YT1CLR
Type: Hard Disk
Supports 48-bit addressing
Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
Marvell>>