Nas Died

Re: Nas Died

Postby Jocko » Thu Mar 09, 2017 12:55 pm

You merge two command lines!

First do
Code: Select all
busybox tftp -r gdisk -l /sbin/gdisk -g 192.168.10.22
(-l is not -1 but -l as in letter) and later
Code: Select all
chmod 755 /sbin/gdisk
Jocko
Site Admin - expert
 
Posts: 11367
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: Nas Died

Postby poilopil » Thu Mar 09, 2017 1:46 pm

i tried but i dont get any output.

strange

i copied paste from your last post
poilopil
 
Posts: 25
Joined: Wed Feb 01, 2017 2:22 pm

Re: Nas Died

Postby poilopil » Thu Mar 09, 2017 1:52 pm

ok i tried it again at a new telnet window and with first command give me the error:
tftp:timeout
poilopil
 
Posts: 25
Joined: Wed Feb 01, 2017 2:22 pm

Re: Nas Died

Postby fvdw » Thu Mar 09, 2017 4:52 pm

Probably your killed the tftp server. Start it again in the fvdw-sl console
fvdw
Site Admin - expert
 
Posts: 13245
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands

Re: Nas Died

Postby poilopil » Fri Mar 10, 2017 7:58 am

so i started it again and also started it from the beginning.
i still get correcting firmware image failed failed.
Then i tried the command in the telnet window and get a time0out.
what am i doing wrong?
poilopil
 
Posts: 25
Joined: Wed Feb 01, 2017 2:22 pm

Re: Nas Died

Postby fvdw » Fri Mar 10, 2017 10:46 am

Ok do it again and be sure to select ms-dos as partition table to be used. When the script aborts and you are back on the command prompt of the telnet client give the command
Code: Select all
fdisk -l /dev/sda
and note that this -l concerns the letter l and not number 1 (one) !

Ps in which slot did you insert your disk, seen from the back of the nas? It should be in the first slot start counting from lefthand side when looking to back side of the nas.

Ps2. Is the tftp server running, meaning is the tftp32 window active on your desktop?

Ps3 do you use a wireless connection between you pc and lan. If yes change it to wired and disable your wireless adapter. Wireless connection are subject to disturbance and may corrupt data transfer
fvdw
Site Admin - expert
 
Posts: 13245
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands

Re: Nas Died

Postby poilopil » Mon Mar 13, 2017 8:43 am

After i put this command i get this:

Device Boot Start End Blocks Id System
/dev/sda1 1 125 1004031 5 Extended
/dev/sda2 126 121601 975755970 83 Linux
/dev/sda5 1 16 128457 82 Linux swap
/dev/sda6 17 17 8001 83 Linux
/dev/sda7 18 18 8001 83 Linux
/dev/sda8 19 40 176683+ 83 Linux
/dev/sda9 41 124 674698+ 83 Linux
/dev/sda10 125 125 8001 83 Linux

i disabled wifi
also all 5 raid disks are into the nas
poilopil
 
Posts: 25
Joined: Wed Feb 01, 2017 2:22 pm

Re: Nas Died

Postby fvdw » Mon Mar 13, 2017 7:04 pm

Dear poilopil

What you post indicates that you still have the lacie partition structure on this disk. Also you mention that you still have 5 disks installed. :tapfoot
Apparently you are not able to read, understand and follow very simple instructions. In this way it is impossible to help you. I will stop to spend my time am not as it has no use. Maybe the reason is that you don't understand english very well :dontknow . I regret it but I am going to close this topic, sorry.
fvdw
Site Admin - expert
 
Posts: 13245
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands

Previous

Return to Lacie 5Big Network vs1

Who is online

Users browsing this forum: No registered users and 2 guests