lacie 5 big network v.1 please support for fvdw

[taetae]

Code: Select all

~ # mke2fs -j -m 1 /dev/sdd8
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
121888768 inodes, 487549440 blocks
4875494 blocks (1.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=0
14879 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
        102400000, 214990848

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 31 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.


Code: Select all

~ #  vol_id /dev/sdd8
ID_FS_USAGE=filesystem
ID_FS_TYPE=ext3
ID_FS_VERSION=1.0
ID_FS_UUID=ee7b282f-bde8-4e76-af3b-3a67c74c4c3c
ID_FS_LABEL=
ID_FS_LABEL_SAFE=
~ #

~ # mount /dev/sdd8 /share/1003
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdd8): using internal journal
EXT3-fs (sdd8): mounted filesystem with ordered data mode



Code: Select all

~ # mke2fs -j -m 1 /dev/sde8
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
121888768 inodes, 487549440 blocks
4875494 blocks (1.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=0
14879 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
        102400000, 214990848

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 24 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
~ #  vol_id /dev/sde8
ID_FS_USAGE=filesystem
ID_FS_TYPE=ext3
ID_FS_VERSION=1.0
ID_FS_UUID=936669c2-db7b-4f47-90e5-9333356afe28
ID_FS_LABEL=
ID_FS_LABEL_SAFE=
~ # mount /dev/sde8 /share/1004
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sde8): using internal journal
EXT3-fs (sde8): mounted filesystem with ordered data mode
~ #


[taetae]

Code: Select all

         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|  ** LOADER **
 ** MARVELL BOARD: RD-88F5281-LaCie LE

U-Boot 1.1.4 (Jun 26 2008 - 16:55:41) Marvell version: 2.4.9

U-Boot code: 00200000 -> 0026FFF0  BSS: -> 00283280

Soc: 88F5281 D0 (DDR2)
CPU running @ 500Mhz
SysClock = 166Mhz , TClock = 166Mhz

DRAM CS[0] base 0x00000000   size 128MB
DRAM Total size 128MB  32bit width
[4096kB@ffc00000] Flash:  4 MB
Addresses 4M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (4M - 3M): Done
*** Warning - bad CRC, using default environment


CPU : ARM926 (Rev 0)
Streaming disabled
VFP initialized to Run Fast Mode.

USB 0: host mode
PCI 0: PCI Express Root Complex Interface
PCI 1: PCI-X, speed = 66000000
CPU: Write allocate Disabled
Net:   egiga0 [PRIME]
POWER ON
Hit any key to stop autoboot:  0
Waiting for LUMP (5)
no lump receive; continuing

Reset IDE:
Marvell Serial ATA Adapter
Found adapter at bus 1, device 7 ... Scanning channels
  Device 0: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0218180
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 1: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0410979
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 2: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0424246
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 3: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0219436
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 4: OK
Model: WDC WD5000AADS-00S9B0                    Firm: 01.00A01 Ser#:      WD-WCAV90478832
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)


Loading from IDE device 0, partition 6: Name: hda6
  Type: U-Boot

** Bad Magic Number **

Loading from IDE device 1, partition 6: Name: hdb6
  Type: U-Boot

** Bad Magic Number **

Loading from IDE device 2, partition 6: Name: hdc6
  Type: U-Boot

** Bad Magic Number **

Loading from IDE device 3, partition 6: Name: hdd6
  Type: U-Boot

** Bad Magic Number **

Loading from IDE device 4, partition 6: Name: hde6
  Type: U-Boot
   Image Name:   Linux-2.6.39.4
   Created:      2013-09-23  18:39:53 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1871800 Bytes =  1.8 MB
   Load Address: 00008000
   Entry Point:  00008000
## Booting image at 00400000 ...
   Image Name:   Linux-2.6.39.4
   Created:      2013-09-23  18:39:53 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1871800 Bytes =  1.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.39.4 (root@fvdwsl-5big2.local) (gcc version 4.5.4 (GCC) ) #20 PREEMPT Mon Sep 23 19:39:28 GMT+1 2013
CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: LaCie 5Big1 Network
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro boardType=mv88F5281 productType=5Big reset=0
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 125992k/125992k available, 5080k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xc8800000 - 0xfd800000   ( 848 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0028000   ( 128 kB)
      .text : 0xc0028000 - 0xc03a6000   (3576 kB)
      .data : 0xc03a6000 - 0xc03c1a40   ( 111 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptable hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:64
sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Orion ID: MV88F5281-D0. TCLK=166666667.
Orion: Applying 5281 D0 WFI workaround.
net5big: powering up SATA drives
net5big: turning off power-off control GPIO
net5big: Flash writing is not yet supported.
PCI: bus0: Fast back to back transfers disabled
PCI: bus1: Fast back to back transfers enabled
pci 0000:01:07.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit]
pci 0000:01:07.0: BAR 0: set to [mem 0xe8000000-0xe80fffff 64bit] (PCI address [0xe8000000-0xe80fffff])
pci 0000:01:07.0: BAR 2: assigned [io  0x100000-0x1000ff]
pci 0000:01:07.0: BAR 2: set to [io  0x100000-0x1000ff] (PCI address [0x100000-0x1000ff])
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource orion_clocksource
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 246
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
sata_mv 0000:01:07.0: version 1.28
sata_mv 0000:01:07.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
scsi0 : sata_mv
scsi1 : sata_mv
scsi2 : sata_mv
scsi3 : sata_mv
scsi4 : sata_mv
scsi5 : sata_mv
scsi6 : sata_mv
scsi7 : sata_mv
ata1: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8022000 irq 52
ata2: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8024000 irq 52
ata3: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8026000 irq 52
ata4: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8028000 irq 52
ata5: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8032000 irq 52
ata6: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8034000 irq 52
ata7: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8036000 irq 52
ata8: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8038000 irq 52
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 5
scsi8 : sata_mv
scsi9 : sata_mv
scsi10 : sata_mv
scsi11 : sata_mv
scsi12 : sata_mv
ata9: SATA max UDMA/133 irq 29
ata10: SATA max UDMA/133 irq 29
ata11: SATA max UDMA/133 irq 29
ata12: SATA max UDMA/133 irq 29
ata13: SATA max UDMA/133 irq 29
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:4b:8b:60:2b
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
usbcore: registered new interface driver ipheth
console [netcon0] enabled
netconsole: network logging started
aoe: AoE v47 initialised.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: gpio-keys as /devices/platform/gpio-keys/input/input0
i2c /dev entries driver
rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6
rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor mv_xor.0: Self-test copy failed compare, disabling
mv_xor mv_xor.1: Self-test copy failed compare, disabling
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1968 buckets, 7872 max)
IPv4 over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 5
NET: Registered protocol family 37
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
rtc-rs5c372 0-0032: setting system clock to 2013-12-25 07:34:53 UTC (1387956893)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 0
fvdw2 disk indexfvdw 0
fvdw3 disk indexfvdw 4
fvdw4 disk diskname= sde
sd 0:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sde] 4096-byte physical blocks
sd 0:0:0:0: [sde] Write Protect is off
sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: sde4 < sde5 sde6 sde7 sde8 >
sd 0:0:0:0: [sde] Attached SCSI disk
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: failed to resume link (SControl 0)
ata9: SATA link down (SStatus 0 SControl 0)
ata2.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 1
fvdw2 disk indexfvdw 1
fvdw3 disk indexfvdw 3
fvdw4 disk diskname= sdd
sd 1:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdd] 4096-byte physical blocks
sd 1:0:0:0: [sdd] Write Protect is off
sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd4 < sdd5 sdd6 sdd7 sdd8 >
sd 1:0:0:0: [sdd] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 2
fvdw2 disk indexfvdw 2
fvdw3 disk indexfvdw 2
fvdw4 disk diskname= sdc
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc4 < sdc5 sdc6 sdc7 sdc8 >
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 3
fvdw2 disk indexfvdw 3
fvdw3 disk indexfvdw 1
fvdw4 disk diskname= sdb
sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sdb] 4096-byte physical blocks
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 >
sd 3:0:0:0: [sdb] Attached SCSI disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
fvdw1 disk index 4
fvdw2 disk indexfvdw 4
fvdw3 disk indexfvdw 0
fvdw4 disk diskname= sda
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata10: failed to resume link (SControl 0)
ata10: SATA link down (SStatus 0 SControl 0)
ata11: failed to resume link (SControl 0)
ata11: SATA link down (SStatus 0 SControl 0)
ata12: failed to resume link (SControl 0)
ata12: SATA link down (SStatus 0 SControl 0)
ata13: failed to resume link (SControl 0)
ata13: SATA link down (SStatus 0 SControl 0)
EXT3-fs: barriers not enabled
EXT3-fs (sda7): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:71.
kjournald starting.  Commit interval 5 seconds
Freeing init memory: 128K
start rcS
set global environment params
mount proc
remount root file system rw
EXT3-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda7): using internal journal
mount sysfs
start boot log
detect and set platform
unknown
update dev nodes
booting using  root file system...
make dev node for buttons...
mkdir: can't create directory '/dev/input': File exists
mknod: /dev/input/event0: File exists
make dev node for tun device...
mknod: /dev/net/tun: File exists
enable IP forwarding...
start buttons control daemon
/etc/init.d/rcS: line 522: /usr/sbin/buttonsd: Permission denied
create temporary passwd file
run udevstart to update dev nodes when necessary
mkdir: can't create directory 'rw_fs': File exists
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda5): using internal journal
EXT3-fs (sda5): recovery complete
EXT3-fs (sda5): mounted filesystem with ordered data mode
Setting up swapspace version 1, size = 526413824 bytes
UUID=c769eb69-518d-4835-b4b0-af21799c0cac
Adding 514076k swap on /dev/sda3.  Priority:-1 extents:1 across:514076k
inserting kernel modules:
NTFS driver 2.1.30 [Flags: R/W MODULE].
fuse init (API version 7.16)
usbcore: registered new interface driver usblp
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
iSCSI Enterprise Target Software - version trunk
iscsi_trgt: Registered io type fileio
iscsi_trgt: Registered io type blockio
iscsi_trgt: Registered io type nullio
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
Usage: mount -V                 : print version
       mount -h                 : print this help
       mount                    : list mounted filesystems
       mount -l                 : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
       mount -a [-t|-O] ...     : mount all stuff from /etc/fstab
       mount device             : mount device at the known place
       mount directory          : mount known device here
       mount -t type dev dir    : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
       mount --bind olddir newdir
or move a subtree:
       mount --move olddir newdir
One can change the type of mount containing the directory dir:
       mount --make-shared dir
       mount --make-slave dir
       mount --make-private dir
       mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
       mount --make-rshared dir
       mount --make-rslave dir
       mount --make-rprivate dir
       mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using  -L label  or by uuid, using  -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say  man 8 mount .
configure loopback network interface
setting reboot and standby
starting php based setup routines step 1
sudo: /usr/sbin/lsscsi: command not found
sudo: /usr/sbin/lsscsi: command not found
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda8): using internal journal
EXT3-fs (sda8): recovery complete
EXT3-fs (sda8): mounted filesystem with ordered data mode
API[2013/12/25 07:35:18] dm_mount_all.finc(59)[753]: Failed to mount /share/1001
API[2013/12/25 07:35:18] dm_mount_all.finc(59)[753]: Failed to mount /share/1002
API[2013/12/25 07:35:18] dm_mount_all.finc(59)[753]: Failed to mount /share/1003
API[2013/12/25 07:35:18] dm_mount_all.finc(59)[753]: Failed to mount /share/1004
udevd (822): /proc/822/oom_adj is deprecated, please use /proc/822/oom_score_adj instead.
mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled
passwd[850]: password for `carmine' changed by user `root'
passwd[855]: password for `adelina' changed by user `root'
passwd[859]: password for `lucio' changed by user `root'
passwd[863]: password for `veronica' changed by user `root'
start portmap service
starting php based setup routines step2
starting php based setup routines step3
starting php based setup routines step banner
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
------------------------
rcS finished
------------------------
 list boot.log file
start boot log
detect and set platform
unknown
unknown
unknown
update dev nodes
booting using  root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
device = unknown
source =
Wed Dec 25 08:35:02 GMT+1 2013
create temporary passwd file
run udevstart to update dev nodes when necessary
inserting kernel modules:
configure loopback netwerk interface
setting reboot and standby
unknown

unknown

starting php based setup routines step 1

 * Found XML database configuration file...      [ OK ]
 * Configuring Disks...                                  [ OK ]
 * Starting mount of volumes...
   - Mounting volume Disk-a:             [ OK ]
   - Mounting volume Disk-b:             [ Fail ]
   - Mounting volume Disk-c:             [ Fail ]
   - Mounting volume Disk-d:             [ Fail ]
   - Mounting volume Disk-e:             [ Fail ]
 * Finishing mount of volumes...                 [ Fail ]
 * Generating Hosts File...                      [ OK ]
 * Configuring System Hostname...                [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Configuring LAN interface...                  [ OK ]
 * Starting udevd...                                     [ OK ]
 * Starting web server...                                [ OK ]
 * Initializing Timezone...                      [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Configuring System Users...
        Root password: use default password
        Set users, linux and samba accounts      [ OK ]
 * Starting Fvdw-sl Discovery Daemon...  [ OK ]
start portmap service
starting php based setup routines step 2
 * Starting dropbear...                                  [ OK ]
 * Kill temporary dropbear...                    [ OK ]
starting php based setup routines step 3
 * Starting daemon update Hosts File...  [ OK ]
 * Starting Disk Temperature Guard...    [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
    This is fvdw-sl version: fvdw-sl 15.0
    built on: September 30 2013

    LAN IP address: 192.168.1.71 (static)

    Port configuration:

    LAN   -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
rcS finished
/bin/sh: can't access tty; job control turned off
~ # mount /dev/sdb8 /share/1001
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb8): using internal journal
EXT3-fs (sdb8): recovery complete
EXT3-fs (sdb8): mounted filesystem with ordered data mode
~ # mount /dev/sdc8 /share/1002
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdc8): using internal journal
EXT3-fs (sdc8): recovery complete
EXT3-fs (sdc8): mounted filesystem with ordered data mode
~ # mount /dev/sdd8 /share/1003
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdd8): using internal journal
EXT3-fs (sdd8): recovery complete
EXT3-fs (sdd8): mounted filesystem with ordered data mode
~ # mount /dev/sde8 /share/1004
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sde8): using internal journal
EXT3-fs (sde8): recovery complete
EXT3-fs (sde8): mounted filesystem with ordered data mode
~ #


[Jocko]

Ok still there is an issue.

But at least after mounting you should see the disks rightly in the web-interface ?

Could you post the content of the current nas database : copy here all tag disks and vols

To do that do

Code: Select all

cp /etc/nas_conf_db.xml /share/1000/fvdw
chmod og+w /share/1000/fvdw/etc/nas_conf_db.xml

(I assume that you have a share fvdw)

[taetae]

Code: Select all

~ # mount /dev/sdb8 /share/1001
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb8): using internal journal
EXT3-fs (sdb8): recovery complete
EXT3-fs (sdb8): mounted filesystem with ordered data mode
~ # mount /dev/sdc8 /share/1002
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdc8): using internal journal
EXT3-fs (sdc8): recovery complete
EXT3-fs (sdc8): mounted filesystem with ordered data mode
~ # mount /dev/sdd8 /share/1003
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdd8): using internal journal
EXT3-fs (sdd8): recovery complete
EXT3-fs (sdd8): mounted filesystem with ordered data mode
~ # mount /dev/sde8 /share/1004
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sde8): using internal journal
EXT3-fs (sde8): recovery complete
EXT3-fs (sde8): mounted filesystem with ordered data mode
~ # cp /etc/nas_conf_db.xml /share/1000/fvdw
~ # chmod og+w /share/1000/fvdw/etc/nas_conf_db.xml
chmod: /share/1000/fvdw/etc/nas_conf_db.xml: Not a directory


Code: Select all

~ # cd share
/share # ls
1000  1001  1002  1003  1004
/share # cd 1000
/share/1000 # ls
Terra                  fvdw                   motion-webcam
UIMAGE-26394-5BIG1-11  lost+found
/share/1000 # cd fvdw
/bin/sh: cd: can't cd to fvdw


copy in Terra

Code: Select all

/share/1000 # cp /etc/nas_conf_db.xml /share/1000/Terra/
/share/1000 # chmod og+w /share/1000/Terra/nas_conf_db.xml
/share/1000 #


Disk Setup no fre space (I think it's a function on the interface because I fvdw step a database manually written) :

[Jocko]

Hi taetae,

I found why the firmware failed to mount the data partitions of the last 4 disks.

We forgot to update the nas database with the new data partition: sd?8 instead of sd?1.

So see your pm, I sent you a new NAS database.

Unzip this file to the share fvdw and in Putty give these commands:

Code: Select all

cp /rw_fs/etc/nas_conf_db.xml  /rw_fs/etc/nas_conf_db.xml.bad
cp /share/1000/fvdw/nas_conf_db.xml.8 /rw_fs/etc/nas_conf_db.xml

[taetae]

Code: Select all

/share/1000/Terra # cp /rw_fs/etc/nas_conf_db.xml  /rw_fs/etc/nas_conf_db.xml.ba
d
/share/1000/Terra # cp nas_conf_db.xml.8 /rw_fs/etc/nas_conf_db.xml
/share/1000/Terra #



Reboot

Code: Select all

     __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|  ** LOADER **
 ** MARVELL BOARD: RD-88F5281-LaCie LE

U-Boot 1.1.4 (Jun 26 2008 - 16:55:41) Marvell version: 2.4.9

U-Boot code: 00200000 -> 0026FFF0  BSS: -> 00283280

Soc: 88F5281 D0 (DDR2)
CPU running @ 500Mhz
SysClock = 166Mhz , TClock = 166Mhz

DRAM CS[0] base 0x00000000   size 128MB
DRAM Total size 128MB  32bit width
[4096kB@ffc00000] Flash:  4 MB
Addresses 4M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (4M - 3M): Done
*** Warning - bad CRC, using default environment


CPU : ARM926 (Rev 0)
Streaming disabled
VFP initialized to Run Fast Mode.

USB 0: host mode
PCI 0: PCI Express Root Complex Interface
PCI 1: PCI-X, speed = 66000000
CPU: Write allocate Disabled
Net:   egiga0 [PRIME]
POWER ON
Hit any key to stop autoboot:  0
Marvell>> boot
Waiting for LUMP (5)
no lump receive; continuing

Reset IDE:
Marvell Serial ATA Adapter
Found adapter at bus 1, device 7 ... Scanning channels
  Device 0: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0218180
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 1: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0410979
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 2: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0424246
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 3: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0219436
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 4: OK
Model: WDC WD5000AADS-00S9B0                    Firm: 01.00A01 Ser#:      WD-WCAV90478832
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)


Loading from IDE device 0, partition 6: Name: hda6
  Type: U-Boot

** Bad Magic Number **

Loading from IDE device 1, partition 6: Name: hdb6
  Type: U-Boot

** Bad Magic Number **

Loading from IDE device 2, partition 6: Name: hdc6
  Type: U-Boot

** Bad Magic Number **

Loading from IDE device 3, partition 6: Name: hdd6
  Type: U-Boot

** Bad Magic Number **

Loading from IDE device 4, partition 6: Name: hde6
  Type: U-Boot
   Image Name:   Linux-2.6.39.4
   Created:      2013-09-23  18:39:53 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1871800 Bytes =  1.8 MB
   Load Address: 00008000
   Entry Point:  00008000
## Booting image at 00400000 ...
   Image Name:   Linux-2.6.39.4
   Created:      2013-09-23  18:39:53 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1871800 Bytes =  1.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.39.4 (root@fvdwsl-5big2.local) (gcc version 4.5.4 (GCC) ) #20 PREEMPT Mon Sep 23 19:39:28 GMT+1 2013
CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: LaCie 5Big1 Network
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro boardType=mv88F5281 productType=5Big reset=0
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 125992k/125992k available, 5080k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xc8800000 - 0xfd800000   ( 848 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0028000   ( 128 kB)
      .text : 0xc0028000 - 0xc03a6000   (3576 kB)
      .data : 0xc03a6000 - 0xc03c1a40   ( 111 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptable hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:64
sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Orion ID: MV88F5281-D0. TCLK=166666667.
Orion: Applying 5281 D0 WFI workaround.
net5big: powering up SATA drives
net5big: turning off power-off control GPIO
net5big: Flash writing is not yet supported.
PCI: bus0: Fast back to back transfers disabled
PCI: bus1: Fast back to back transfers enabled
pci 0000:01:07.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit]
pci 0000:01:07.0: BAR 0: set to [mem 0xe8000000-0xe80fffff 64bit] (PCI address [0xe8000000-0xe80fffff])
pci 0000:01:07.0: BAR 2: assigned [io  0x100000-0x1000ff]
pci 0000:01:07.0: BAR 2: set to [io  0x100000-0x1000ff] (PCI address [0x100000-0x1000ff])
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource orion_clocksource
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 246
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
sata_mv 0000:01:07.0: version 1.28
sata_mv 0000:01:07.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
scsi0 : sata_mv
scsi1 : sata_mv
scsi2 : sata_mv
scsi3 : sata_mv
scsi4 : sata_mv
scsi5 : sata_mv
scsi6 : sata_mv
scsi7 : sata_mv
ata1: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8022000 irq 52
ata2: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8024000 irq 52
ata3: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8026000 irq 52
ata4: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8028000 irq 52
ata5: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8032000 irq 52
ata6: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8034000 irq 52
ata7: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8036000 irq 52
ata8: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8038000 irq 52
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 5
scsi8 : sata_mv
scsi9 : sata_mv
scsi10 : sata_mv
scsi11 : sata_mv
scsi12 : sata_mv
ata9: SATA max UDMA/133 irq 29
ata10: SATA max UDMA/133 irq 29
ata11: SATA max UDMA/133 irq 29
ata12: SATA max UDMA/133 irq 29
ata13: SATA max UDMA/133 irq 29
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:4b:8b:60:2b
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
usbcore: registered new interface driver ipheth
console [netcon0] enabled
netconsole: network logging started
aoe: AoE v47 initialised.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: gpio-keys as /devices/platform/gpio-keys/input/input0
i2c /dev entries driver
rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6
rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor mv_xor.0: Self-test copy failed compare, disabling
mv_xor mv_xor.1: Self-test copy failed compare, disabling
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1968 buckets, 7872 max)
IPv4 over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 5
NET: Registered protocol family 37
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
rtc-rs5c372 0-0032: setting system clock to 2013-12-26 04:58:53 UTC (1388033933)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 0
fvdw2 disk indexfvdw 0
fvdw3 disk indexfvdw 4
fvdw4 disk diskname= sde
sd 0:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sde] 4096-byte physical blocks
sd 0:0:0:0: [sde] Write Protect is off
sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: sde4 < sde5 sde6 sde7 sde8 >
sd 0:0:0:0: [sde] Attached SCSI disk
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: failed to resume link (SControl 0)
ata9: SATA link down (SStatus 0 SControl 0)
ata2.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 1
fvdw2 disk indexfvdw 1
fvdw3 disk indexfvdw 3
fvdw4 disk diskname= sdd
sd 1:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdd] 4096-byte physical blocks
sd 1:0:0:0: [sdd] Write Protect is off
sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd4 < sdd5 sdd6 sdd7 sdd8 >
sd 1:0:0:0: [sdd] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 2
fvdw2 disk indexfvdw 2
fvdw3 disk indexfvdw 2
fvdw4 disk diskname= sdc
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc4 < sdc5 sdc6 sdc7 sdc8 >
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 3
fvdw2 disk indexfvdw 3
fvdw3 disk indexfvdw 1
fvdw4 disk diskname= sdb
sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sdb] 4096-byte physical blocks
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 >
sd 3:0:0:0: [sdb] Attached SCSI disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
fvdw1 disk index 4
fvdw2 disk indexfvdw 4
fvdw3 disk indexfvdw 0
fvdw4 disk diskname= sda
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata10: failed to resume link (SControl 0)
ata10: SATA link down (SStatus 0 SControl 0)
ata11: failed to resume link (SControl 0)
ata11: SATA link down (SStatus 0 SControl 0)
ata12: failed to resume link (SControl 0)
ata12: SATA link down (SStatus 0 SControl 0)
ata13: failed to resume link (SControl 0)
ata13: SATA link down (SStatus 0 SControl 0)
EXT3-fs: barriers not enabled
EXT3-fs (sda7): mounted filesystem with ordered data mode
kjournald starting.  Commit interval 5 seconds
VFS: Mounted root (ext3 filesystem) readonly on device 8:71.
Freeing init memory: 128K
start rcS
set global environment params
mount proc
remount root file system rw
EXT3-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda7): using internal journal
mount sysfs
start boot log
detect and set platform
unknown
update dev nodes
booting using  root file system...
make dev node for buttons...
mkdir: can't create directory '/dev/input': File exists
mknod: /dev/input/event0: File exists
make dev node for tun device...
mknod: /dev/net/tun: File exists
enable IP forwarding...
start buttons control daemon
/etc/init.d/rcS: line 522: /usr/sbin/buttonsd: Permission denied
create temporary passwd file
run udevstart to update dev nodes when necessary
mkdir: can't create directory 'rw_fs': File exists
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda5): using internal journal
EXT3-fs (sda5): recovery complete
EXT3-fs (sda5): mounted filesystem with ordered data mode
Setting up swapspace version 1, size = 526413824 bytes
UUID=342d289d-066b-4ec6-ba5d-1d2cd174ac40
Adding 514076k swap on /dev/sda3.  Priority:-1 extents:1 across:514076k
inserting kernel modules:
NTFS driver 2.1.30 [Flags: R/W MODULE].
fuse init (API version 7.16)
usbcore: registered new interface driver usblp
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
iSCSI Enterprise Target Software - version trunk
iscsi_trgt: Registered io type fileio
iscsi_trgt: Registered io type blockio
iscsi_trgt: Registered io type nullio
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
Usage: mount -V                 : print version
       mount -h                 : print this help
       mount                    : list mounted filesystems
       mount -l                 : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
       mount -a [-t|-O] ...     : mount all stuff from /etc/fstab
       mount device             : mount device at the known place
       mount directory          : mount known device here
       mount -t type dev dir    : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
       mount --bind olddir newdir
or move a subtree:
       mount --move olddir newdir
One can change the type of mount containing the directory dir:
       mount --make-shared dir
       mount --make-slave dir
       mount --make-private dir
       mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
       mount --make-rshared dir
       mount --make-rslave dir
       mount --make-rprivate dir
       mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using  -L label  or by uuid, using  -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say  man 8 mount .
configure loopback network interface
setting reboot and standby
starting php based setup routines step 1
sudo: /usr/sbin/lsscsi: command not found
sudo: /usr/sbin/lsscsi: command not found
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda8): using internal journal
EXT3-fs (sda8): recovery complete
EXT3-fs (sda8): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb8): using internal journal
EXT3-fs (sdb8): recovery complete
EXT3-fs (sdb8): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdc8): using internal journal
EXT3-fs (sdc8): recovery complete
EXT3-fs (sdc8): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdd8): using internal journal
EXT3-fs (sdd8): recovery complete
EXT3-fs (sdd8): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sde8): using internal journal
EXT3-fs (sde8): recovery complete
EXT3-fs (sde8): mounted filesystem with ordered data mode
udevd (822): /proc/822/oom_adj is deprecated, please use /proc/822/oom_score_adj instead.
mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled
passwd[850]: password for `carmine' changed by user `root'
passwd[855]: password for `adelina' changed by user `root'
passwd[859]: password for `lucio' changed by user `root'
passwd[863]: password for `veronica' changed by user `root'
start portmap service
starting php based setup routines step2
starting php based setup routines step3
starting php based setup routines step banner
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
------------------------
rcS finished
------------------------
 list boot.log file
start boot log
detect and set platform
unknown
unknown
unknown
update dev nodes
booting using  root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
device = unknown
source =
Thu Dec 26 05:59:02 GMT+1 2013
create temporary passwd file
run udevstart to update dev nodes when necessary
inserting kernel modules:
configure loopback netwerk interface
setting reboot and standby
unknown

unknown

starting php based setup routines step 1

 * Found XML database configuration file...      [ OK ]
 * Configuring Disks...                                  [ OK ]
 * Starting mount of volumes...
   - Mounting volume Vol-a:              [ OK ]
   - Mounting volume Vol-b:              [ OK ]
   - Mounting volume Vol-c:              [ OK ]
   - Mounting volume Vol-d:              [ OK ]
   - Mounting volume Vol-e:              [ OK ]
 * Finishing mount of volumes...                 [ OK ]
 * Generating Hosts File...                      [ OK ]
 * Configuring System Hostname...                [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Configuring LAN interface...                  [ OK ]
 * Starting udevd...                                     [ OK ]
 * Starting web server...                                [ OK ]
 * Initializing Timezone...                      [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Configuring System Users...
        Root password: use default password
        Set users, linux and samba accounts      [ OK ]
 * Starting Fvdw-sl Discovery Daemon...  [ OK ]
start portmap service
starting php based setup routines step 2
 * Starting dropbear...                                  [ OK ]
 * Kill temporary dropbear...                    [ OK ]
starting php based setup routines step 3
 * Starting daemon update Hosts File...  [ OK ]
 * Starting Disk Temperature Guard...    [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
    This is fvdw-sl version: fvdw-sl 15.0
    built on: September 30 2013

    LAN IP address: 192.168.1.71 (static)

    Port configuration:

    LAN   -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
rcS finished
/bin/sh: can't access tty; job control turned off
~ #



Very god :-)......
Interface full ok file share and Disk Setup
What do you feel now?

[Jocko]

So one issue fixed :thumbup

Now, you can already use fully your NAS if you don't swap the disks in their slot. So I advice you to identify them. When the disk database bug will be fixed, you need no longer to identify them.

With the Christmas holidays, I can fix it only after next Saturday but remember what I wrote

Note : I think that we must fix one by one the issues.
So currently, I suggest that we resolve first your problem with the disk
and after :
2/ with fvdw fix the issue with power command (did you do all tests asked by fvdw ?)
3/ fix the boot script issue about the disk database.
about this point, we make some progress and indeed a new kernel version is required. Now we must validate how the esata will be handled.
I did some tests with esata and I had no issue with the shell console. So your esata cable should have a problem or you did not fully plug in it
4/ deepen later the led management for 5big1

So the step 1 is ended.
for the step 2, I suggest to help fvdw that you do again the check asked by him and you post with detail the NAS behaviour when you try first to shutdown from the web-interface and after when you try to restart the NAS.
Post also your kernel version currently loaded, so in putty

Code: Select all

name -a

[taetae]

So one issue fixed :thumbup

Now, you can already use fully your NAS if you don't swap the disks in their slot. So I advice you to identify them. When the disk database bug will be fixed, you need no longer to identify them.

With the Christmas holidays, I can fix it only after next Saturday but remember what I wrote

Note : I think that we must fix one by one the issues.
So currently, I suggest that we resolve first your problem with the disk
and after :
2/ with fvdw fix the issue with power command (did you do all tests asked by fvdw ?)
3/ fix the boot script issue about the disk database.
about this point, we make some progress and indeed a new kernel version is required. Now we must validate how the esata will be handled.
I did some tests with esata and I had no issue with the shell console. So your esata cable should have a problem or you did not fully plug in it
4/ deepen later the led management for 5big1

So the step 1 is ended.
for the step 2, I suggest to help fvdw that you do again the check asked by him and you post with detail the NAS behaviour when you try first to shutdown from the web-interface and after when you try to restart the NAS.
Post also your kernel version currently loaded, so in putty

Code: Select all

name -a

Code: Select all

/etc$ name -a
-sh: name: not found

Restart and shutdown interface not work

shutdown :I click shutdown the interface and I get the page about: blank, nothing happens and the serial from the web if I back to work full Nas
smart interface work

Restart: I click on restart, does the countdown but then nothing appears from the serial and the NAS works normally

Auto power

Code: Select all

MODE AUTO-POWER

Waiting for WOL Magic Packet
Using egiga0 device
Waking up...
Hit any key to stop autoboot:  0
Waiting for LUMP (5)
no lump receive; continuing

Reset IDE:
Marvell Serial ATA Adapter
Found adapter at bus 1, device 7 ... Scanning channels
  Device 0: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0218180
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 1: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0410979
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 2: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0424246
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 3: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0219436
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 4: OK
Model: WDC WD5000AADS-00S9B0                    Firm: 01.00A01 Ser#:      WD-WCAV90478832
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)


Loading from IDE device 0, partition 6: Name: hda6
  Type: U-Boot

** Bad Magic Number **

Loading from IDE device 1, partition 6: Name: hdb6
  Type: U-Boot

** Bad Magic Number **

Loading from IDE device 2, partition 6: Name: hdc6
  Type: U-Boot

** Bad Magic Number **

Loading from IDE device 3, partition 6: Name: hdd6
  Type: U-Boot

** Bad Magic Number **

Loading from IDE device 4, partition 6: Name: hde6
  Type: U-Boot
   Image Name:   Linux-2.6.39.4
   Created:      2013-09-23  18:39:53 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1871800 Bytes =  1.8 MB
   Load Address: 00008000
   Entry Point:  00008000
## Booting image at 00400000 ...
   Image Name:   Linux-2.6.39.4
   Created:      2013-09-23  18:39:53 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1871800 Bytes =  1.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.39.4 (root@fvdwsl-5big2.local) (gcc version 4.5.4 (GCC) ) #20 PREEMPT Mon Sep 23 19:39:28 GMT+1 2013
CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: LaCie 5Big1 Network
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro boardType=mv88F5281 productType=5Big
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 125992k/125992k available, 5080k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xc8800000 - 0xfd800000   ( 848 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0028000   ( 128 kB)
      .text : 0xc0028000 - 0xc03a6000   (3576 kB)
      .data : 0xc03a6000 - 0xc03c1a40   ( 111 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptable hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:64
sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Orion ID: MV88F5281-D0. TCLK=166666667.
Orion: Applying 5281 D0 WFI workaround.
net5big: powering up SATA drives
net5big: turning off power-off control GPIO
net5big: Flash writing is not yet supported.
PCI: bus0: Fast back to back transfers disabled
PCI: bus1: Fast back to back transfers enabled
pci 0000:01:07.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit]
pci 0000:01:07.0: BAR 0: set to [mem 0xe8000000-0xe80fffff 64bit] (PCI address [0xe8000000-0xe80fffff])
pci 0000:01:07.0: BAR 2: assigned [io  0x100000-0x1000ff]
pci 0000:01:07.0: BAR 2: set to [io  0x100000-0x1000ff] (PCI address [0x100000-0x1000ff])
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource orion_clocksource
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 246
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
sata_mv 0000:01:07.0: version 1.28
sata_mv 0000:01:07.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
scsi0 : sata_mv
scsi1 : sata_mv
scsi2 : sata_mv
scsi3 : sata_mv
scsi4 : sata_mv
scsi5 : sata_mv
scsi6 : sata_mv
scsi7 : sata_mv
ata1: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8022000 irq 52
ata2: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8024000 irq 52
ata3: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8026000 irq 52
ata4: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8028000 irq 52
ata5: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8032000 irq 52
ata6: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8034000 irq 52
ata7: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8036000 irq 52
ata8: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8038000 irq 52
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 5
scsi8 : sata_mv
scsi9 : sata_mv
scsi10 : sata_mv
scsi11 : sata_mv
scsi12 : sata_mv
ata9: SATA max UDMA/133 irq 29
ata10: SATA max UDMA/133 irq 29
ata11: SATA max UDMA/133 irq 29
ata12: SATA max UDMA/133 irq 29
ata13: SATA max UDMA/133 irq 29
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:4b:8b:60:2b
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
usbcore: registered new interface driver ipheth
console [netcon0] enabled
netconsole: network logging started
aoe: AoE v47 initialised.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: gpio-keys as /devices/platform/gpio-keys/input/input0
i2c /dev entries driver
rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6
rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor mv_xor.0: Self-test copy failed compare, disabling
mv_xor mv_xor.1: Self-test copy failed compare, disabling
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1968 buckets, 7872 max)
IPv4 over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 5
NET: Registered protocol family 37
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
rtc-rs5c372 0-0032: setting system clock to 2013-12-26 08:18:23 UTC (1388045903)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 0
fvdw2 disk indexfvdw 0
fvdw3 disk indexfvdw 4
fvdw4 disk diskname= sde
sd 0:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sde] 4096-byte physical blocks
sd 0:0:0:0: [sde] Write Protect is off
sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: sde4 < sde5 sde6 sde7 sde8 >
sd 0:0:0:0: [sde] Attached SCSI disk
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: failed to resume link (SControl 0)
ata9: SATA link down (SStatus 0 SControl 0)
ata2.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 1
fvdw2 disk indexfvdw 1
fvdw3 disk indexfvdw 3
fvdw4 disk diskname= sdd
sd 1:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdd] 4096-byte physical blocks
sd 1:0:0:0: [sdd] Write Protect is off
sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd4 < sdd5 sdd6 sdd7 sdd8 >
sd 1:0:0:0: [sdd] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 2
fvdw2 disk indexfvdw 2
fvdw3 disk indexfvdw 2
fvdw4 disk diskname= sdc
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc4 < sdc5 sdc6 sdc7 sdc8 >
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 3
fvdw2 disk indexfvdw 3
fvdw3 disk indexfvdw 1
fvdw4 disk diskname= sdb
sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sdb] 4096-byte physical blocks
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 >
sd 3:0:0:0: [sdb] Attached SCSI disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
fvdw1 disk index 4
fvdw2 disk indexfvdw 4
fvdw3 disk indexfvdw 0
fvdw4 disk diskname= sda
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata10: failed to resume link (SControl 0)
ata10: SATA link down (SStatus 0 SControl 0)
ata11: failed to resume link (SControl 0)
ata11: SATA link down (SStatus 0 SControl 0)
ata12: failed to resume link (SControl 0)
ata12: SATA link down (SStatus 0 SControl 0)
ata13: failed to resume link (SControl 0)
ata13: SATA link down (SStatus 0 SControl 0)
EXT3-fs: barriers not enabled
EXT3-fs (sda7): mounted filesystem with ordered data mode
kjournald starting.  Commit interval 5 seconds
VFS: Mounted root (ext3 filesystem) readonly on device 8:71.
Freeing init memory: 128K
start rcS
set global environment params
mount proc
remount root file system rw
EXT3-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda7): using internal journal
mount sysfs
start boot log
detect and set platform
unknown
update dev nodes
booting using  root file system...
make dev node for buttons...
mkdir: can't create directory '/dev/input': File exists
mknod: /dev/input/event0: File exists
make dev node for tun device...
mknod: /dev/net/tun: File exists
enable IP forwarding...
start buttons control daemon
/etc/init.d/rcS: line 522: /usr/sbin/buttonsd: Permission denied
waiting for WOL magic packet..
eth0 MAC address is: 00D04B8B602B
mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled

/dev/sda:
 issuing sleep command
/dev/sda ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6

ata5.00: waking up from sleep
ata5: hard resetting link
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: configured for UDMA/133
HDD status 1 0=aata5: EH complete
ctive 1=standby


[Jocko]

Thank taetae.

I did an error about the shell command, the rigth command was

Code: Select all

uname -a

. But with your output I saw that you use the version : "Linux version 2.6.39.4 (root@fvdwsl-5big2.local) (gcc version 4.5.4 (GCC) ) #20 PREEMPT Mon Sep 23 19:39:28 GMT+1 2013" so no need to do it.

For the stop and start behaviours, you need to wait fvdw for these points.

[taetae]

Ok if you want to carry out another tell me .....

Code: Select all

uname -a
Linux Terra.local 2.6.39.4 #20 PREEMPT Mon Sep 23 19:39:28 GMT+1 2013 armv5tel GNU/Linux