cant connect anymore

cant connect anymore

Postby poilopil » Tue Mar 14, 2017 1:05 pm

SO i finally installed the software suc6full at our nas 5big vs1 and could connect with browser.
I logged in suc6full and than i shut the nas down. I installed the other 4 disks but now i cant connect anymore.....the nas cant be find and wont get an ip anymore.
what could be the problem? sorry for my other closed topic becuase my englisch isnt very good and i need 2 use google translate.
what could be the sollution?
poilopil
 
Posts: 25
Joined: Wed Feb 01, 2017 2:22 pm

Re: cant connect anymore

Postby Jocko » Tue Mar 14, 2017 2:30 pm

With a little personal effort, you got there. :roll:

For the other disks, next step is here: viewtopic.php?f=7&t=1271. So read and follow instructions
Jocko
Site Admin - expert
 
Posts: 11366
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: cant connect anymore

Postby poilopil » Tue Mar 14, 2017 3:10 pm

yes i got there :)
i am reading the extra disk thing but i must connect to the webconsole eventually right?
why cant i ping the disk anymore? it happend after i told the console to reboot.
What could the problem be ?
poilopil
 
Posts: 25
Joined: Wed Feb 01, 2017 2:22 pm

Re: cant connect anymore

Postby poilopil » Thu Mar 16, 2017 9:48 am

so im testing again....i downloaded angry ip scanner and the nas wont show up.
After upgrading the NAS with the software i looks like it wont get an ip anymore
anyone can help me? dont know what 2 do
i rebooted the nas several times
poilopil
 
Posts: 25
Joined: Wed Feb 01, 2017 2:22 pm

Re: cant connect anymore

Postby Jocko » Thu Mar 16, 2017 12:47 pm

Hi

You did not read this point from the help page:
Switch off your nas before adding the other disks in the free slots and then reboot.
Preferable to disk should have no partition table. In any case they should NOT contain a fvdw-sl system disk partition table nor a kernel nor our firmware.
This point is very important with a 2big1 or 5big1. These additional disks formatted by LACIE firmware contain a kernel partition.

So you need to delete partitions on the additional disks before plugging them in the 5big1. You can use your disk manager provided by the OS of your laptop (=> plug directly these disks on it)
Jocko
Site Admin - expert
 
Posts: 11366
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: cant connect anymore

Postby poilopil » Fri Mar 17, 2017 8:08 am

yes i can do this but isnt it strange that the NAS wont get an ip anymore?
even when i have the 1 disk connected or any disks at all.
It happend when i logged in on the webbase and try to reboot the nas(didnt work) so i did it by hand.
What can i do to get the ip working again ?
poilopil
 
Posts: 25
Joined: Wed Feb 01, 2017 2:22 pm

Re: cant connect anymore

Postby poilopil » Mon Mar 20, 2017 9:22 am

Can anyone help me with this?
poilopil
 
Posts: 25
Joined: Wed Feb 01, 2017 2:22 pm

Re: cant connect anymore

Postby fvdw » Mon Mar 20, 2017 5:12 pm

In which slot is the disk were you installed the firmware?
It should be in most lefthand side slot seen from the back

Please check your pm inbox
fvdw
Site Admin - expert
 
Posts: 13239
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands


Return to Lacie 5Big Network vs1

Who is online

Users browsing this forum: No registered users and 1 guest

cron