fvdw wrote:1. First poweroff your lacie nas
2. On your pc start the fvdw-sl console, leave everything default
3 in the fvdw-sl console choose install firmware
4. Choose the correct standalone kernel when asked (you need the kirkwood standalone kernel)
5. When the command window with "waiting for uboot..." appears power on your lacie nas.
6. The console will detect boot and interuot it and upload the standalone kernel and after that start the telnet client.(it will wait 15 sec or so before doing that).
Please read help text in the fvdw-sl main window for next steps after telnet window appears
Also the help pages in help dropdown menu are helpfull...
Thank you, i have followed now your steps and installed image to the Lacie, BUT;
1. From the console install fimrware will not work and can't connect via terminal.
2. Tried to
write image to disk from the console and successfully formatted drive with MSDOS not the GPT. Reboted Lacie but i can't find it on my network, tried Assistant but nothing :(
(On the first chose from the console i have chose
UIMAGE-26394-2BIG1-47-1-1-4-standalone ) and via de terminal
Kirkwood big2At the first chose via the console
UIMAGE-3142-KIRKWOOD-171-standalone i can;t connect via the terminal..
What is wrong here?