[SOLVED] SATA cables were swapped - Back LED is now wrong
Posted: Mon Jun 12, 2023 9:11 amFinally I reverted back the SATA cables as they were initially and now I have primary disk (sda) on right side and secondary disk (sdb) on left side.
If setup with only 1 disk, it will be on right side.
The LED on back side are matching with the right disks.
----------------------------
Hello!
Fvdw was installed on left disk (right slot empty) and faced some problems installing a 2nd disk, in right slot.
After reading different posts, I inverted the 2 SATA cables and left disk is now recognized as sda, right disk now initialized as sdb.
I had to recreate the fileshares (they were visible in ssh, but no more on the web page).
All good.
However, now I see on back side that the blue LED is now ON on the empty slot (test with only 1 disk on left slot) on right side...and not on left slot, where the disk is installed.
Any idea on how to solve that minor issue?
Thanks,
Fabien
If setup with only 1 disk, it will be on right side.
The LED on back side are matching with the right disks.
----------------------------
Hello!
Fvdw was installed on left disk (right slot empty) and faced some problems installing a 2nd disk, in right slot.
After reading different posts, I inverted the 2 SATA cables and left disk is now recognized as sda, right disk now initialized as sdb.
I had to recreate the fileshares (they were visible in ssh, but no more on the web page).
All good.
However, now I see on back side that the blue LED is now ON on the empty slot (test with only 1 disk on left slot) on right side...and not on left slot, where the disk is installed.
Any idea on how to solve that minor issue?
Thanks,
Fabien