new install fvdv trouble

[araldo60]

So this time no warning from gnutar command ? in this case it was really this inode block issue.

So now you can make a new fw upgrade attempt

yes now its ok its performing a reboot

all ok

but you understand what happen ?

if i understand there is no problem on disk like bad block or everything else.

thank you for assistance

last question is can you suggest a link for plex server

[Jocko]

:thumbup yes your issue is fixed and not related with a bad sector...

You just have now to reboot the nas and later install the last roll-up patch for version 18-2

For plex you just have to read this topic : https://plugout.net/viewtopic.php?f=15&t=1999 and just run the command

Code: Select all

plexmediaserver

on terminal session (as you did it here)

Note: With version 18-2 and its roll-up patch no need to install the attached patches (they are required only for version 15.3 and 16.1)

[araldo60]

:thumbup yes your issue is fixed and not related with a bad sector...

You just have now to reboot the nas and later install the last roll-up patch for version 18-2

For plex you just have to read this topic : https://plugout.net/viewtopic.php?f=15&t=1999 and just run the command

Code: Select all

plexmediaserver

on terminal session (as you did it here)

Note: With version 18-2 and its roll-up patch no need to install the attached patches (they are required only for version 15.3 and 16.1)

first thank you for alla support that receive from you
the system is now operating and i read the post for plex that you send me
but is not very clear how can install the add on
1) download the add on seeing from the topic
1) go on firmware update
2) go under update patch
3) go under terminal
but how can i download and upload on the system ?

other question how can i configure the driver for my mac
when i try to connect ? Better where i configure user or permission to do that
or i must configure web interface ?????

Many Thanks

[Jocko]

Hi

I do not understand where you have issues with plex. I already wrote

Note: With version 18-2 and its roll-up patch no need to install the attached patches (they are required only for version 15.3 and 16.1)

and you just have to run the command 'plexmediaserver' from a terminal session which will explain the command options :scratch and then use the option 'install'

Now, after selecting the option 'install'

• you must have in the addons folder :
  
  1. a new subfolder plexmediaserver
  2. if you did not yet install it, python add-on (auto-install)
• a new private share plex-prog
• a shell script 'plexmediaserver' in /usr/bin to control plex feature
• a plex linux user account

To get access on pms web interface, use this URL : http://yournasme:32400/web

About share/user do you notice there is an help menu at each menu ? For example when you create a share like this https://plugout.net/fvdw-sl/.help/share_folders_a_hlp.htm?v=17.0a
There, I think you will find the expected information

[araldo60]

Hi

I do not understand where you have issues with plex. I already wrote
Note: With version 18-2 and its roll-up patch no need to install the attached patches (they are required only for version 15.3 and 16.1) and you just have to run the command 'plexmediaserver' from a terminal session which will explain the command options :scratch and then use the option 'install'

Now, after selecting the option 'install'

• you must have in the addons folder :
  
  1. a new subfolder plexmediaserver
  2. if you did not yet install it, python add-on (auto-install)
• a new private share plex-prog
• a shell script 'plexmediaserver' in /usr/bin to control plex feature
• a plex linux user account

To get access on pms web interface, use this URL : http://yournasme:32400/web

About share/user do you notice there is an help menu at each menu ? For example when you create a share like this https://plugout.net/fvdw-sl/.help/share_folders_a_hlp.htm?v=17.0a
There, I think you will find the expected information

I try to install

using command plexmediaserver install

but if i understand something is wrong

Code: Select all

root@fvdwsl-base:/ # plexmediaserver install
Install python addons

2021-02-08 09:54:45 URL:http://plugout.net/firm_version/python.txt  -> "-"
2021-02-08 09:54:49 URL:http://plugout.net/files/55_10a034b4c1d71c9b546273ac34674c15 -> "/tmp/python.zip"
Archive:  /tmp/python.zip
  inflating: /tmp/python.tar         
  inflating: /tmp/14-0-python-patch.tar 
/usr/bin/plexmediaserver: line 113: /opt/bin/gnutar: not found
   Installing Plex...

Downloading plex package from plugout...
Retrieved the file PlexMediaServer-0.9.16.3.1840-cece46d-arm.spk
Install...
/usr/bin/plexmediaserver: line 583: /opt/bin/gnutar: not found
Cannot extract /mnt/HD_a2/programs/plex/tmp/.tmp/plexfile.gz
Failed!

[Jocko]

You have to install the last roll-up patch for version 18-2 which fixes quietly the gnutar bug

[araldo60]

You have to install the last roll-up patch for version 18-2 which fixes quietly the gnutar bug

Thanks

if i understand last roll up patch is inside the 18-2 version ?

thats installed on my lacie server

if i dont understand let me know where i can download the patch.

[Jocko]

all details are available in this topic: https://plugout.net/viewtopic.php?f=7&t=3149

[araldo60]

[quote="Jocko"]all details are available in this topic: [url]https://plugout.net/viewtopic.php?f=7&t=3149[/url][/quote]


i take this error after applied the patch that you suggest

root@fvdwsl-base:/ # plexmediaserver install
Install python addons

2021-02-08 21:34:31 URL:http://plugout.net/firm_version/python.txt [60/60] -> "-" [1]
2021-02-08 21:34:35 URL:http://plugout.net/files/55_10a034b4c1d71c9b546273ac34674c15 [30160876/30160876] -> "/tmp/python.zip" [1]
Archive: /tmp/python.zip
inflating: /tmp/python.tar
inflating: /tmp/14-0-python-patch.tar
Installing Plex...

Downloading plex package from plugout...
Retrieved the file PlexMediaServer-0.9.16.3.1840-cece46d-arm.spk
Install...
Synology package detected
extracting....
gzip: crc error
/opt/bin/gnutar: Child returned status 1
/opt/bin/gnutar: Error is not recoverable: exiting now
Cannot extract /mnt/HD_a2/programs/plex/tmp/.tmp/package.tgz
Failed!

[Jocko]

Code: Select all

Synology package detected
extracting....
gzip: crc error

a crc error would mean the downloaded file was corrupted.

So you should repeat to install plex