2BIG2 not detected after upgrading

Re: 2BIG2 not detected after upgrading

Postby alfa76 » Fri Aug 14, 2020 9:01 am

Hi, that is

the file boot.log isn't present.

Code: Select all
***************************************************************
Found invalid GPT and valid MBR; converting MBR to GPT format.
***************************************************************

Disk /dev/sda: 3907029168 sectors, 1.8 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 3907029134
Partitions will be aligned on 8-sector boundaries
Total free space is 663701 sectors (324.1 MiB)

Number  Start (sector)    End (sector)  Size       Code  Name
   1          128520         1156679   502.0 MiB   8300  Linux filesystem
   2         1156680         2184839   502.0 MiB   8300  Linux filesystem
   3         2184840         3212999   502.0 MiB   8200  Linux swap
   5         3341520         5012279   815.8 MiB   8300  Linux filesystem
   6         5140800         5269319   62.8 MiB    8300  Linux filesystem
   7         5397840         6425999   502.0 MiB   8300  Linux filesystem
   8         6554520      3907007999   1.8 TiB     8300  Linux filesystem
---------------------------------------------------------------------------------------
root@fvdw-sta-kirkwood:/ # ls -l /sda7
total 14
drwxrwxrwx    3 root     root          1024 May 16 22:29 etc
drwxr-xr-x    3 root     root          1024 May 16 22:29 lib
drwx------    2 root     root         12288 May 16 22:28 lost+found
---------------------------------------------------------------------------------------
root@fvdw-sta-kirkwood:/ # ls -l /sda5
total 44
drwxr-xr-x    2 root     root          4096 May 16 22:29 etc
-rw-r--r--    1 root     root         10413 May 16 22:29 installer.log
drwx------    2 root     root         16384 Jan  1  2000 lost+found
drwxr-xr-x    2 root     root          4096 Aug 12  2011 tmp
drwxr-xr-x    3 root     root          4096 May 16 22:29 usr
drwxr-xr-x    3 root     root          4096 May 16 22:29 var
---------------------------------------------------------------------------------------
root@fvdw-sta-kirkwood:/ # cat /sda7/boot.log
cat: can't open '/sda7/boot.log': No such file or directory
root@fvdw-sta-kirkwood:/ #
---------------------------------------------------------------------------------------
root@fvdw-sta-kirkwood:/ # cat /sda5/installer.log
fvdw-sl-installer log
tftpd ip address 192.168.104.58
getting required programs from tftp server 192.168.104.58
Dialog installed
xterm installed
mke2fs-ext3 present
gdisk present
Start fvdw-sl firmware installer version 4.0
cpuinfo= LaCie 2Big Network v2
selected nas type 2big2 platform kirkwood
selected disk /dev/sda
gpt support bootloader selected no
selected partion table type msdos
Deleting old gpt partiton table
deleting gpt partition succeeded

create new partiton table
create ms-dos partiton table
max cylinder 243201
ms-dos partiton scheme disk last cylinder 243200 (-1)
Device contains neither a valid DOS partition table, nor Sun, SGI, OSF or GPT disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that the previous content
won't be recoverable.


The number of cylinders for this disk is set to 243201.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (1-243201, default 1): Last cylinder or +size or +sizeM or +sizeK (9-243201, default 243201):
Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (1-243201, default 1): Last cylinder or +size or +sizeM or +sizeK (73-243201, default 243201):
Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (1-243201, default 1): Last cylinder or +size or +sizeM or +sizeK (137-243201, default 243201):
Command (m for help): Partition number (1-4): Hex code (type L to list codes): Changed system type of partition 3 to 82 (Linux swap)

Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Selected partition 4
First cylinder (1-243201, default 1): Last cylinder or +size or +sizeM or +sizeK (201-243201, default 243201):
Command (m for help): First cylinder (201-243200, default 201): Last cylinder or +size or +sizeM or +sizeK (209-243200, default 243200):
Command (m for help): First cylinder (201-243200, default 201): Last cylinder or +size or +sizeM or +sizeK (321-243200, default 243200):
Command (m for help): First cylinder (201-243200, default 201): Last cylinder or +size or +sizeM or +sizeK (337-243200, default 243200):
Command (m for help): First cylinder (201-243200, default 201): Last cylinder or +size or +sizeM or +sizeK (409-243200, default 243200):
Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table
creating ms-dos partiton table succeeded
format partition 5
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
52304 inodes, 208845 blocks
2088 blocks (1.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=213909504
7 block groups
32768 blocks per group, 32768 fragments per group
7472 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840

Writing inode tables: done                           
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
formatting sda5 succeeded
writing kernel to partition 6
mounting sda 5 succeeded
getting kernel from tftp server
writing kernel to partition 6
9328+1 records in
9328+1 records out
4776328 bytes (4.6MB) copied, 0.402497 seconds, 11.3MB/s
writing kernel to partition 6 succeeded
Getting firmware image from tftp server
firmware disk image uploaded succesfully\n
format partition 7
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
128520 inodes, 514080 blocks
5140 blocks (1.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67633152
63 block groups
8192 blocks per group, 8192 fragments per group
2040 inodes per group
Superblock backups stored on blocks:
        8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409

Writing inode tables: done                           
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 31 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
formatting sda7 succeeded
mounting  partition succeeded
extracting firmware base files
tar: invalid magic
tar: short read
Adapting firmware image for 2big2\n
Transfer of firmware correction from tfp server succeeded, starting pacthing of firmware image
mkdir: can't create directory '/fvdw-sl': File exists
etc/
etc/init.d/
etc/init.d/insert-modules.5big2
etc/init.d/insert-modules.2big2
etc/init.d/insert-modules.cloudbox
etc/init.d/insert-modules.nwsp2
etc/init.d/insert-modules.isp2
etc/init.d/insert-modules.nwspmax
etc/init.d/insert-modules.d2nw2
etc/init.d/insert-modules.2bignas
etc/init.d/insert-modules.wsp2
etc/platform
lib/
lib/modules/
lib/modules/4.14.133/
lib/modules/4.14.133/snd-usbmidi-lib.ko
lib/modules/4.14.133/videobuf-core.ko
lib/modules/4.14.133/rtl8187.ko
lib/modules/4.14.133/isofs.ko
lib/modules/4.14.133/snd-timer.ko
lib/modules/4.14.133/target_core_pscsi.ko
lib/modules/4.14.133/hid-samsung.ko
lib/modules/4.14.133/usb_f_mass_storage.ko
lib/modules/4.14.133/snd-seq-midi.ko
lib/modules/4.14.133/nbd.ko
lib/modules/4.14.133/rt2x00usb.ko
lib/modules/4.14.133/target_core_mod.ko
lib/modules/4.14.133/usblp.ko
lib/modules/4.14.133/zstd_decompress.ko
lib/modules/4.14.133/g_ether.ko
lib/modules/4.14.133/ftdi-elan.ko
lib/modules/4.14.133/hid-sunplus.ko
lib/modules/4.14.133/hid-monterey.ko
lib/modules/4.14.133/xxhash.ko
lib/modules/4.14.133/modules.builtin
lib/modules/4.14.133/hid-petalynx.ko
lib/modules/4.14.133/iscsi_target_mod.ko
lib/modules/4.14.133/rt2x00lib.ko
lib/modules/4.14.133/iscsi_tcp.ko
lib/modules/4.14.133/snd-seq-device.ko
lib/modules/4.14.133/lzo_compress.ko
lib/modules/4.14.133/rtlwifi.ko
lib/modules/4.14.133/rt2800usb.ko
lib/modules/4.14.133/hid-gyration.ko
lib/modules/4.14.133/snd-seq-midi-event.ko
lib/modules/4.14.133/usb_f_rndis.ko
lib/modules/4.14.133/macvlan.ko
lib/modules/4.14.133/ftdi_sio.ko
lib/modules/4.14.133/mtdram.ko
lib/modules/4.14.133/snd-seq.ko
lib/modules/4.14.133/mac80211.ko
lib/modules/4.14.133/usb-storage.ko
lib/modules/4.14.133/soundcore.ko
lib/modules/4.14.133/sg.ko
lib/modules/4.14.133/veth.ko
lib/modules/4.14.133/pl2303.ko
lib/modules/4.14.133/hid-belkin.ko
lib/modules/4.14.133/hid-cherry.ko
lib/modules/4.14.133/rtc-pcf8563.ko
lib/modules/4.14.133/rtl8192c-common.ko
lib/modules/4.14.133/snd.ko
lib/modules/4.14.133/cdrom.ko
lib/modules/4.14.133/libiscsi.ko
lib/modules/4.14.133/snd-pcm.ko
lib/modules/4.14.133/libcomposite.ko
lib/modules/4.14.133/modules.order
lib/modules/4.14.133/ums-sddr55.ko
lib/modules/4.14.133/rt2800lib.ko
lib/modules/4.14.133/hid-ezkey.ko
lib/modules/4.14.133/ehci-orion.ko
lib/modules/4.14.133/snd-rawmidi.ko
lib/modules/4.14.133/configfs.ko
lib/modules/4.14.133/xhci-hcd.ko
lib/modules/4.14.133/scsi_transport_iscsi.ko
lib/modules/4.14.133/g_mass_storage.ko
lib/modules/4.14.133/ehci-hcd.ko
lib/modules/4.14.133/u_ether.ko
lib/modules/4.14.133/cramfs.ko
lib/modules/4.14.133/block2mtd.ko
lib/modules/4.14.133/snd-pcm-oss.ko
lib/modules/4.14.133/usbserial.ko
lib/modules/4.14.133/hid-a4tech.ko
lib/modules/4.14.133/snd-usb-audio.ko
lib/modules/4.14.133/ums-jumpshot.ko
lib/modules/4.14.133/zr364xx.ko
lib/modules/4.14.133/bonding.ko
lib/modules/4.14.133/videobuf-vmalloc.ko
lib/modules/4.14.133/squashfs.ko
lib/modules/4.14.133/hid-logitech.ko
lib/modules/4.14.133/ums-freecom.ko
lib/modules/4.14.133/hid-chicony.ko
lib/modules/4.14.133/libiscsi_tcp.ko
lib/modules/4.14.133/target_core_iblock.ko
lib/modules/4.14.133/btrfs.ko
lib/modules/4.14.133/hid-apple.ko
lib/modules/4.14.133/rtl8192cu.ko
lib/modules/4.14.133/target_core_file.ko
lib/modules/4.14.133/rtl_usb.ko
lib/modules/4.14.133/snd-hwdep.ko
lib/modules/4.14.133/usb_f_ecm_subset.ko
lib/modules/4.14.133/tcm_loop.ko
lib/modules/4.14.133/snd-mixer-oss.ko
lib/modules/4.14.133/r8712u.ko
lib/modules/4.14.133/hid-pl.ko
lib/modules/4.14.133/hid-cypress.ko
lib/modules/4.14.133/pktgen.ko
lib/modules/4.14.133/udf.ko
lib/modules/4.14.133/sisusbvga.ko
lib/modules/4.14.133/udc-core.ko
lib/modules/4.14.133/mv_udc.ko
lib/modules/4.14.133/usbhid.ko
lib/modules/4.14.133/nlmon.ko
lib/modules/4.14.133/hid-sony.ko
lib/modules/4.14.133/ums-sddr09.ko
lib/modules/4.14.133/cfg80211.ko
lib/modules/4.14.133/modules.dep
lib/modules/4.14.133/michael_mic.ko
lib/modules/4.14.133/lzo_decompress.ko
lib/modules/4.14.133/phy-gpio-vbus-usb.ko
lib/modules/4.14.133/ums-datafab.ko
lib/modules/4.14.133/rt73usb.ko
lib/modules/4.14.133/usb_f_ecm.ko
lib/modules/4.14.133/sr_mod.ko
lib/modules/4.14.133/ums-alauda.ko
lib/modules/4.14.133/rtc-m41t80.ko
lib/modules/4.14.133/rt2500usb.ko
lib/modules/4.14.133/hid-microsoft.ko
lib/modules/4.14.133/zstd_compress.ko
lib/modules/4.14.133/wire.ko
lib/modules/4.14.133/mdc800.ko
correcting firmware image for 2big2 succeeded\n
write default database to partition 5
uploading default database on partition 5 succeeded
extraction and installing of the default database on partition 5 succeeded
format partition 8 shared folder partition
formating partition 8 succeeded
create shared folder public on partition 8
Installation completed
root@fvdw-sta-kirkwood:/ #
alfa76
Donator VIP
Donator VIP
 
Posts: 8
Joined: Sun Aug 09, 2020 2:17 pm

Re: 2BIG2 not detected after upgrading

Postby Jocko » Fri Aug 14, 2020 10:07 am

Thank you alfa76.

Installation is wrongly ok as on sda7 many files are missing. This because tar failed to install them
Code: Select all
tar: invalid magic
So that would mean either the install script has failed to upload rightly fvdw-sl-18-1-base-v2-29jul19.files.tar.gz or this file is corrupted on your laptop.

Then download again fvdw-sl console package and uncompress it on your laptop and try to install the firmware.
Jocko
Site Admin - expert
 
Posts: 11367
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: 2BIG2 not detected after upgrading

Postby alfa76 » Fri Aug 14, 2020 7:56 pm

Perfect, I downloaded again the firmware and now work perfectly, many thanks. The problem now is the second HD. I follow the previous istructions, but when I try to initialize the hd by web interface something go wrong, and the firmware go broken.

UPDATE
I resolved the problem, I had recreate the table using gdisk and recreate the MBR
Last edited by alfa76 on Sat Aug 15, 2020 9:10 am, edited 1 time in total.
alfa76
Donator VIP
Donator VIP
 
Posts: 8
Joined: Sun Aug 09, 2020 2:17 pm

Re: 2BIG2 not detected after upgrading

Postby alfa76 » Fri Aug 14, 2020 9:48 pm

It's possible to restore the original Firmware ?
alfa76
Donator VIP
Donator VIP
 
Posts: 8
Joined: Sun Aug 09, 2020 2:17 pm

Previous

Return to Lacie 2Big Network vs2

Who is online

Users browsing this forum: No registered users and 3 guests