Trying to install new 2To disks into 2Big NW v2
Posted: Wed Jan 25, 2017 2:55 pm
Dear all,
I'm desperatelly trying to boot a LaCie 2Big Network 2 I bought without ANY disks.
Because of my poor knowledge on this subject, here is what I tried/^performed
1) I installed 2 clean WD Green 2To => nothing happened, I can't see anything using the Lacie Network Assistant
2) I tried to use the Network Assistant with Recovering procedure => main led blinks blue then red and after nothing more
3) After hours spent on Internet, I tried the procedure to install firmware on fresh disks with Ubuntu => no more improvement
Here are my questions :
1) how do I connect the NAS to my computer to reload any fresh Kernel/boot/FW into the 2 new hard disk ?
2) Which files / archive I can use to upload to the NAS ?
3) Can I use a LaCie 2Big NAS to preapre the Hard disk for the 2Big Network 2
ANY HELP WILL BE SOOOOOOOO WELCOLME :-)
Cheers to all
Manelppa
I'm desperatelly trying to boot a LaCie 2Big Network 2 I bought without ANY disks.
Because of my poor knowledge on this subject, here is what I tried/^performed
1) I installed 2 clean WD Green 2To => nothing happened, I can't see anything using the Lacie Network Assistant
2) I tried to use the Network Assistant with Recovering procedure => main led blinks blue then red and after nothing more
3) After hours spent on Internet, I tried the procedure to install firmware on fresh disks with Ubuntu => no more improvement
Here are my questions :
1) how do I connect the NAS to my computer to reload any fresh Kernel/boot/FW into the 2 new hard disk ?
2) Which files / archive I can use to upload to the NAS ?
3) Can I use a LaCie 2Big NAS to preapre the Hard disk for the 2Big Network 2
ANY HELP WILL BE SOOOOOOOO WELCOLME :-)
Cheers to all
Manelppa