USB problem

[marcin]

Hello,
2big network vs2 I have for a long time, but recently I wanted to connect the usb hdd and unfortunately the device does not see the disk.
is it normal? if anything we can do?

This is the view information from the items:
USB-devices:

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.14
S: Manufacturer=Linux 3.14.2 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=orion-ehci.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

I'll put the disc with the original firmware everything works correctly
what is wrong?

[Jocko]

Hi marcin,

So only the hub device is listed.

You can try first to update the USB device database.

So on a shell windows do:

Code: Select all

/usr/sbin/update-usbids.sh -q 1

then unplug/plug your disk and see if it is detected

[marcin]

Unfortunately, after the command is executed the effect is still the same as before. The only difference is when you reboot you will see that at the moment the LED power in usb disk, but in a moment off.

this is dmesg:

Code: Select all

[   18.038624] pinctrl core: initialized pinctrl subsystem
[   18.038795] NET: Registered protocol family 16
[   18.039277] DMA: preallocated 256 KiB pool for atomic coherent allocations
[   18.042185] Kirkwood: MV88F6281-A0, TCLK=166666667.
[   18.042212] Feroceon L2: Enabling L2
[   18.042249] Feroceon L2: Cache support initialised.
[   18.043334] mv_usb_init 1
[   18.043353] mv_usb_init 2 devnum = 0
[   18.043365] init function mv_usb_init finished
[   18.043373] initial MPP regs: 01112222 00003311 00551100 00000000 00000000 00000000 00000000
[   18.043403]   final MPP regs: 01112222 00003311 00551100 00000000 00000000 00000000 00000000
[   18.043580]  orion-ehci registered
[   18.045237] orion_gpio_is_valid: invalid GPIO 7
[   18.073337] bio: create slab <bio-0> at 0
[   18.239769] raid6: int32x1     95 MB/s
[   18.408754] raid6: int32x2    123 MB/s
[   18.579052] raid6: int32x4    120 MB/s
[   18.748998] raid6: int32x8    129 MB/s
[   18.749008] raid6: using algorithm int32x8 (129 MB/s)
[   18.749016] raid6: using intx1 recovery algorithm
[   18.749871] SCSI subsystem initialized
[   18.750331] libata version 3.00 loaded.
[   18.751199] usbcore: registered new interface driver usbfs
[   18.751373] usbcore: registered new interface driver hub
[   18.751561] usbcore: registered new device driver usb
[   18.751973] Linux video capture interface: v2.00
[   18.754202] cfg80211: Calling CRDA to update world regulatory domain
[   18.754525] Switched to clocksource orion_clocksource
[   18.756785] NET: Registered protocol family 2
[   18.757288] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[   18.757326] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[   18.757359] TCP: Hash tables configured (established 2048 bind 2048)
[   18.757420] TCP: reno registered
[   18.757433] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   18.757457] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   18.757629] NET: Registered protocol family 1
[   18.757912] RPC: Registered named UNIX socket transport module.
[   18.757923] RPC: Registered udp transport module.
[   18.757930] RPC: Registered tcp transport module.
[   18.757937] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   18.757949] PCI: CLS 0 bytes, default 32
[   18.758139] NetWinder Floating Point Emulator V0.97 (double precision)
[   18.758296] gpio-usb-probe-4b err=0
[   18.758312] gpio-usb gpio-usb: USB GPIO's initialized
[   18.759817] futex hash table entries: 256 (order: -1, 3072 bytes)
[   18.873403] VFS: Disk quotas dquot_6.5.2
[   18.873459] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   18.873928] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   18.874189] NTFS driver 2.1.30 [Flags: R/W].
[   18.874221] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[   18.874378] fuse init (API version 7.22)
[   18.875003] JFS: nTxBlock = 1953, nTxLock = 15626
[   18.875757] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   18.876143] msgmni has been set to 488
[   18.877249] async_tx: api initialized (async)
[   18.877436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   18.877449] io scheduler noop registered
[   18.877457] io scheduler deadline registered
[   18.877486] io scheduler cfq registered (default)
[   18.877865] mv_xor mv_xor.0: Marvell shared XOR driver
[   18.908613] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[   18.948608] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[   18.948857] mv_xor mv_xor.1: Marvell shared XOR driver
[   18.988608] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[   19.028608] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[   19.034392] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   19.055506] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[   19.591815] console [ttyS0] enabled
[   19.604640] brd: module loaded
[   19.612356] loop: module loaded
[   19.616990] sata_mv sata_mv.0: version 1.28
[   19.617067] sata_mv sata_mv.0: cannot get optional clkdev
[   19.622618] sata_mv sata_mv.0: slots 32 ports 2
[   19.630542] scsi0 : sata_mv
[   19.633885] scsi1 : sata_mv
[   19.637065] ata1: SATA max UDMA/133 irq 21
[   19.641216] ata2: SATA max UDMA/133 irq 21
[   19.647852] m25p80 spi0.0: mx25l4005a (512 Kbytes)
[   19.652948] Creating 2 MTD partitions on "spi_flash":
[   19.657983] 0x000000000000-0x00000007d000 : "u-boot"
[   19.664236] 0x00000007e000-0x00000007f000 : "u-boot-env"
[   19.672306] tun: Universal TUN/TAP device driver, 1.6
[   19.677331] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   19.683734] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   19.691993] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   19.708056] libphy: orion_mdio_bus: probed
[   19.712446] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   20.148582] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   20.188613] ata1.00: ATA-8: WDC WD2003FYYS-02W0B1, 01.01D02, max UDMA/133
[   20.195374] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   20.258618] ata1.00: configured for UDMA/133
[   20.278862] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2003FYYS-0 01.0 PQ: 0 ANSI: 5
[   20.298949] fvdw1 disk index before get_sd_name = 0
[   20.303800] device-name= sata_mv
[   20.307015] fvdw2 disk index after get_sd_name = 0
[   20.328574] fvdw3 prefix[0]=s  prefix[1]=d
[   20.332650] fvdw4 diskname = sda
[   20.336208] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   20.349265] sd 0:0:0:0: [sda] Write Protect is off
[   20.354040] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   20.365871] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.424777]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[   20.459410] sd 0:0:0:0: [sda] Attached SCSI disk
[   20.891143] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:8b:1f:ea
[   20.899980] PPP generic driver version 2.4.2
[   20.904544] PPP Deflate Compression module registered
[   20.909633] PPP MPPE Compression module registered
[   20.914399] NET: Registered protocol family 24
[   20.919055] usbcore: registered new interface driver rtl8187
[   20.924892] usbcore: registered new interface driver rtl8192cu
[   20.930942] usbcore: registered new interface driver rt2500usb
[   20.936942] usbcore: registered new interface driver rt73usb
[   20.942794] usbcore: registered new interface driver rt2800usb
[   20.948843] usbcore: registered new interface driver ath9k_htc
[   20.954653] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   20.962212] usbcore: registered new interface driver pegasus
[   20.968037] usbcore: registered new interface driver asix
[   20.973579] usbcore: registered new interface driver ax88179_178a
[   20.979855] usbcore: registered new interface driver cdc_ether
[   20.985833] usbcore: registered new interface driver net1080
[   20.991667] usbcore: registered new interface driver cdc_subset
[   20.997730] usbcore: registered new interface driver zaurus
[   21.003505] usbcore: registered new interface driver ipheth
[   21.009299] usbcore: registered new interface driver cdc_ncm
[   21.015896] aoe: cannot create debugfs directory
[   21.020667] aoe: AoE v85 initialised.
[   21.218583] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   21.225735] ata2.15: Port Multiplier 1.1, 0x197b:0x2352 r1, 2 ports, feat 0x0/0x8
[   21.240585] ata2.00: hard resetting link
[   21.629349] ata2.01: hard resetting link
[   22.028573] rtc-mv rtc-mv: internal RTC not ticking
[   22.033709] i2c /dev entries driver
[   22.038204] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[   22.048871] uvcvideo: Unable to create debugfs directory
[   22.054370] usbcore: registered new interface driver uvcvideo
[   22.060120] USB Video Class driver (1.1.1)
[   22.064201] gspca_main: v2.14.0 registered
[   22.068452] usbcore: registered new interface driver Philips webcam
[   22.085197] gpio-fan gpio-fan: GPIO fan initialized
[   22.091779] md: linear personality registered for level -1
[   22.097241] md: raid0 personality registered for level 0
[   22.102592] md: raid1 personality registered for level 1
[   22.107877] md: raid10 personality registered for level 10
[   22.113554] md: raid6 personality registered for level 6
[   22.118881] md: raid5 personality registered for level 5
[   22.124171] md: raid4 personality registered for level 4
[   22.129670] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[   22.138291] device-mapper: multipath: version 1.6.0 loaded
[   22.143781] device-mapper: multipath round-robin: version 1.0.0 loaded
[   22.150299] device-mapper: multipath queue-length: version 0.1.0 loaded
[   22.156883] device-mapper: multipath service-time: version 0.2.0 loaded
[   22.163552] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   22.169641] device-mapper: raid: Loading target version 1.5.2
[   22.178218] Netfilter messages via NETLINK v0.30.
[   22.183007] nf_conntrack version 0.5.0 (3906 buckets, 15624 max)
[   22.189415] ipip: IPv4 over IPv4 tunneling driver
[   22.195035] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.200513] TCP: cubic registered
[   22.203860] NET: Registered protocol family 10
[   22.209316] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   22.214831] sit: IPv6 over IPv4 tunneling driver
[   22.220601] NET: Registered protocol family 17
[   22.225101] Bridge firewalling registered
[   22.229359] NET: Registered protocol family 5
[   22.233832] NET: Registered protocol family 37
[   22.239591] console [netcon0] enabled
[   22.243238] netconsole: network logging started
[   22.248239] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   22.255288] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   22.398613] ata2.00: ATA-8: WDC WD2003FYYS-02W0B1, 01.01D02, max UDMA/133
[   22.405374] ata2.00: 3907029168 sectors, multi 0: LBA48
[   22.468618] ata2.00: configured for UDMA/133
[   22.473099] ata2: EH complete
[   22.488858] scsi 1:0:0:0: Direct-Access     ATA      WDC WD2003FYYS-0 01.0 PQ: 0 ANSI: 5
[   22.497415] fvdw1 disk index before get_sd_name = 1
[   22.502324] device-name= sata_mv
[   22.505533] fvdw2 disk index after get_sd_name = 1
[   22.510330] fvdw3 prefix[0]=s  prefix[1]=d
[   22.514406] fvdw4 diskname = sdb
[   22.518099] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   22.526440] sd 1:0:0:0: [sdb] Write Protect is off
[   22.531280] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   22.531394] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   22.582811]  sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 >
[   22.589428] sd 1:0:0:0: [sdb] Attached SCSI disk
[   22.594071] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[   22.612112] EXT3-fs (sda7): recovery required on readonly filesystem
[   22.618442] EXT3-fs (sda7): write access will be enabled during recovery
[   22.848782] kjournald starting.  Commit interval 5 seconds
[   22.868828] EXT3-fs (sda7): recovery complete
[   22.873167] EXT3-fs (sda7): mounted filesystem with ordered data mode
[   22.879625] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
[   22.886820] Freeing unused kernel memory: 188K (c08e3000 - c0912000)
[   23.128350] EXT3-fs (sda7): using internal journal
[   23.668738] EXT3-fs (sda5): warning: checktime reached, running e2fsck is recommended
[   23.676598] kjournald starting.  Commit interval 5 seconds
[   23.682135] EXT3-fs (sda5): using internal journal
[   23.698637] EXT3-fs (sda5): recovery complete
[   23.702978] EXT3-fs (sda5): mounted filesystem with ordered data mode
[   23.774352] random: mkswap urandom read with 80 bits of entropy available
[   23.817797] Adding 524284k swap on /dev/sda3.  Priority:-1 extents:1 across:524284k
[   24.098862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   24.106038] ehci-orion: EHCI orion driver
[   24.110217] orion-ehci orion-ehci.0: EHCI Host Controller
[   24.115613] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   24.123294] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[   24.148574] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[   24.154606] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   24.161381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   24.168581] usb usb1: Product: EHCI Host Controller
[   24.173436] usb usb1: Manufacturer: Linux 3.14.2 ehci_hcd
[   24.178818] usb usb1: SerialNumber: orion-ehci.0
[   24.183890] hub 1-0:1.0: USB hub found
[   24.187649] hub 1-0:1.0: 1 port detected
[   24.204000] usbcore: registered new interface driver usb-storage
[   24.220091] usbcore: registered new interface driver usblp
[   24.237999] iSCSI Enterprise Target Software - version trunk
[   24.243818] iscsi_trgt: Registered io type fileio
[   24.248497] iscsi_trgt: Registered io type blockio
[   24.253298] iscsi_trgt: Registered io type nullio
[   24.270501] Loading iSCSI transport class v2.0-870.
[   24.280248] iscsi: registered transport (tcp)
[   35.479140] random: nonblocking pool is initialized
[   35.530623] udevd (859): /proc/859/oom_adj is deprecated, please use /proc/859/oom_score_adj instead.
[   35.539936] udev: starting version 130
[   46.112881] EXT3-fs (sda8): warning: checktime reached, running e2fsck is recommended
[   46.120723] kjournald starting.  Commit interval 5 seconds
[   46.129325] EXT3-fs (sda8): using internal journal
[   46.168652] EXT3-fs (sda8): recovery complete
[   46.172991] EXT3-fs (sda8): mounted filesystem with ordered data mode
[   46.345824] kjournald starting.  Commit interval 5 seconds
[   46.351397] EXT3-fs (sdb8): using internal journal
[   46.388648] EXT3-fs (sdb8): recovery complete
[   46.392991] EXT3-fs (sdb8): mounted filesystem with ordered data mode
[   48.740533] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[   48.746653] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   50.467152] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
[   50.476904] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[Jocko]

Hi

At least you have another issue :

Code: Select all

[   22.028573] rtc-mv rtc-mv: internal RTC not ticking
...
[   22.255288] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)


What kernel version do you use ? it seems to be 3.14.2

But I don't think it is related to the USB issue.
Do you have the same issue if you plug another USB disk ?

Otherwise, unplug your usb drive, start the debug mode

Code: Select all

/etc/nas_status.sh --start-debug

, plug again the disk, wait around 10s and post the content of

Code: Select all

/var/log/messages

After you have to stop the debug mode

Code: Select all

/etc/nas_status.sh --stop-debug

Post also

Code: Select all

cat /proc/partitions