After capacitor replacement: ERR_CONNECTION_REFUSED

[Draftmancorp]

Hi, after that bad experience (http://plugout.net/viewtopic.php?f=26&t=3616), I decided to check my other 2 Lacie 5Big Network2 as they have at last 8 years old both. And what a surprise... all two main board have the same supercapacitor at the limit with a stain of acid around it on the board.
Now, i'd clean the board and just replaced the supercapacitor with a new one. Start the 2 Nas and. All two start up with all Leds random game. Then i check the web interface.
One work greatly.
The other says ERR_CONNECTION_REFUSED :scratch (this is my very first Lacie 5Big N2, we talk along about this one and it work greatly ever since today.)

so, my test, using a single lan cable between me and it:
- cmd ping its ok (ping 192.168.1.189) something respond greatly but...
- No fvdw console
- No manual check success
- No ssh or telnet connction accepted
- Web interface says ERR_CONNECTION_REFUSED

What could it be? That capacitor is the one that kept volatile data such as system clock, ram etc ... may it has lost some configuration?
I think that using u-boot with standalone kernel load, may, i can reach it... but what can i do then?
Thanks.

$matches[2]

$matches[2]

$matches[2]

Immagine 2022-02-27 203513.jpg

[Draftmancorp]

@jocko it look like the "Forbidden poblem here -> http://plugout.net/viewtopic.php?f=26&t=3600 i had a few weeks ago, if you remember.
But is not the same error. The message is different. Not a forbidden but ERROR_
And this, is not that Nas.
The "forbidden...pour Nas it the death one :sob

Instead, this is my very first Nas, it never had this problem... :scratch
but i think that cutting the supercapacitor made the reset of memory... maybe.

[Jocko]

Hi

Indeed if ping command is ok that would mean a software issue.

So do these commands http://plugout.net/viewtopic.php?f=26&t=3600&start=30#p36470

[Draftmancorp]

Code: Select all

root@fvdw-sta-kirkwood:/ # dmesg -c
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #171 PREEMPT Wed Jan 17 23:33:31 CET 2018
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: LaCie 5Big Network v2
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0982898, node_mem_map dfbfb000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.1.252/,6666@192.168.1.100/ cap=gpt,lba64
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 509780K/524288K available (5950K kernel code, 220K rwdata, 1596K rodata, 1933K init, 233K bss, 14508K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0766b44   (7547 kB)
[    0.000000]       .init : 0xc0767000 - 0xc094a4cc   (1934 kB)
[    0.000000]       .data : 0xc094c000 - 0xc0983100   ( 221 kB)
[    0.000000]        .bss : 0xc098310c - 0xc09bd56c   ( 234 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:114
[    0.000011] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[    7.976071] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[    8.066040] pid_max: default: 32768 minimum: 301
[    8.066176] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    8.066194] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    8.066734] CPU: Testing write buffer coherency: ok
[    8.067043] Setting up static identity map for 0x5a6ac0 - 0x5a6b18
[    8.069676] VFP support v0.3: not present
[    8.070210] xor: measuring software checksum speed
[    8.166075]    arm4regs  :  1089.200 MB/sec
[    8.266034]    8regs     :   654.400 MB/sec
[    8.366025]    32regs    :   905.600 MB/sec
[    8.366041] xor: using function: arm4regs (1089.200 MB/sec)
[    8.366056] pinctrl core: initialized pinctrl subsystem
[    8.366174] NET: Registered protocol family 16
[    8.366553] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    8.369285] Kirkwood: MV88F6281-A1, TCLK=166666667.
[    8.369310] Feroceon L2: Enabling L2
[    8.369347] Feroceon L2: Cache support initialised.
[    8.370438] mv_usb_init 1
[    8.370457] mv_usb_init 2 devnum = 0
[    8.370469] init function mv_usb_init finished
[    8.370477] initial MPP regs: 01112222 00003311 33331100 33003333 00000033 00000000 00000000
[    8.370509]   final MPP regs: 01112222 00003311 33331100 33003333 00000033 00000000 00000000
[    8.370694]  orion-ehci registered
[    8.372524] orion_gpio_is_valid: invalid GPIO 7
[    8.373026] Kirkwood PCIe port 0: link down
[    8.373036] Kirkwood PCIe port 1: link up
[    8.373045] PCI: bus0 uses PCIe port 0
[    8.373284] PCI host bridge to bus 0000:00
[    8.373305] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[    8.373319] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[    8.373332] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    8.373380] pci 0000:00:00.0: [11ab:6281] type 00 class 0x058000
[    8.373409] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
[    8.373427] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x1fffffff]
[    8.373477] pci 0000:00:00.0: supports D1 D2
[    8.373752] PCI: bus0: Fast back to back transfers disabled
[    8.373770] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    8.373782] PCI: bus1 uses PCIe port 1
[    8.374005] PCI host bridge to bus 0000:01
[    8.374023] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff]
[    8.374037] pci_bus 0000:01: root bus resource [io  0x10000-0x1ffff]
[    8.374049] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[    8.374086] PCI: bus1: Fast back to back transfers enabled
[    8.374100] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    8.398261] bio: create slab <bio-0> at 0
[    8.567195] raid6: int32x1     95 MB/s
[    8.736189] raid6: int32x2    123 MB/s
[    8.906254] raid6: int32x4    120 MB/s
[    9.076121] raid6: int32x8    128 MB/s
[    9.076132] raid6: using algorithm int32x8 (128 MB/s)
[    9.076139] raid6: using intx1 recovery algorithm
[    9.076971] SCSI subsystem initialized
[    9.077427] libata version 3.00 loaded.
[    9.078312] usbcore: registered new interface driver usbfs
[    9.078488] usbcore: registered new interface driver hub
[    9.078680] usbcore: registered new device driver usb
[    9.081157] cfg80211: Calling CRDA to update world regulatory domain
[    9.081424] Switched to clocksource orion_clocksource
[    9.083695] NET: Registered protocol family 2
[    9.084162] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    9.084221] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    9.084272] TCP: Hash tables configured (established 4096 bind 4096)
[    9.084325] TCP: reno registered
[    9.084338] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    9.084360] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    9.084551] NET: Registered protocol family 1
[    9.084819] RPC: Registered named UNIX socket transport module.
[    9.084830] RPC: Registered udp transport module.
[    9.084838] RPC: Registered tcp transport module.
[    9.084845] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    9.084865] PCI: CLS 32 bytes, default 32
[    9.231408] NetWinder Floating Point Emulator V0.97 (double precision)
[    9.231533] gpio-usb-probe-4b err=0
[    9.231548] gpio-usb gpio-usb: USB GPIO's initialized
[    9.233152] futex hash table entries: 256 (order: -1, 3072 bytes)
[    9.334816] VFS: Disk quotas dquot_6.5.2
[    9.334865] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    9.335294] NFS: Registering the id_resolver key type
[    9.335340] Key type id_resolver registered
[    9.335350] Key type id_legacy registered
[    9.335368] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    9.335381] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    9.335482] NTFS driver 2.1.30 [Flags: R/W].
[    9.335513] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    9.335659] fuse init (API version 7.22)
[    9.336278] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    9.336692] msgmni has been set to 995
[    9.337808] async_tx: api initialized (async)
[    9.337991] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    9.338003] io scheduler noop registered
[    9.338011] io scheduler deadline registered
[    9.338031] io scheduler cfq registered (default)
[    9.338411] mv_xor mv_xor.0: Marvell shared XOR driver
[    9.376052] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[    9.416051] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[    9.416299] mv_xor mv_xor.1: Marvell shared XOR driver
[    9.456047] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[    9.496048] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[    9.501932] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    9.523047] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[   10.148835] console [ttyS0] enabled
[   10.161714] brd: module loaded
[   10.169420] loop: module loaded
[   10.172859] Uniform Multi-Platform E-IDE driver
[   10.177730] ide-gd driver 1.18
[   10.182285] sata_mv sata_mv.0: version 1.28
[   10.182349] sata_mv sata_mv.0: cannot get optional clkdev
[   10.188178] sata_mv sata_mv.0: slots 32 ports 2
[   10.195723] scsi0 : sata_mv
[   10.199234] scsi1 : sata_mv
[   10.202427] ata1: SATA max UDMA/133 irq 21
[   10.206629] ata2: SATA max UDMA/133 irq 21
[   10.213247] m25p80 spi0.0: mx25l4005a (512 Kbytes)
[   10.218292] Creating 2 MTD partitions on "spi_flash":
[   10.223322] 0x000000000000-0x00000007d000 : "u-boot"
[   10.229560] 0x00000007e000-0x00000007f000 : "u-boot-env"
[   10.237666] tun: Universal TUN/TAP device driver, 1.6
[   10.242697] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   10.249116] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   10.257360] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   10.273721] libphy: orion_mdio_bus: probed
[   10.278103] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   10.716021] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   10.736017] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f
[   10.797663] ata1.00: hard resetting link
[   11.146777] ata1.01: hard resetting link
[   11.390323] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:91:8c:3d
[   11.666276] ata1.02: hard resetting link
[   12.186274] ata1.03: hard resetting link
[   12.488796] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:d0:4b:91:8c:3e
[   12.497635] PPP generic driver version 2.4.2
[   12.502202] PPP Deflate Compression module registered
[   12.507403] PPP MPPE Compression module registered
[   12.512174] NET: Registered protocol family 24
[   12.516823] usbcore: registered new interface driver rtl8187
[   12.522457] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   12.530167] usbcore: registered new interface driver pegasus
[   12.535992] usbcore: registered new interface driver asix
[   12.541542] usbcore: registered new interface driver ax88179_178a
[   12.548295] usbcore: registered new interface driver cdc_ether
[   12.554274] usbcore: registered new interface driver net1080
[   12.560113] usbcore: registered new interface driver cdc_subset
[   12.566227] usbcore: registered new interface driver zaurus
[   12.571983] usbcore: registered new interface driver ipheth
[   12.577728] usbcore: registered new interface driver cdc_ncm
[   12.584368] aoe: cannot create debugfs directory
[   12.589145] aoe: AoE v85 initialised.
[   12.746051] ata1.01: ATA-8: ST2000DL001-9VT156, CC41, max UDMA/133
[   12.752207] ata1.01: 3907029168 sectors, multi 0: LBA48
[   12.816054] ata1.01: configured for UDMA/133
[   12.856046] ata1.02: ATA-8: ST2000DL001-9VT156, CC41, max UDMA/133
[   12.862200] ata1.02: 3907029168 sectors, multi 0: LBA48
[   12.926053] ata1.02: configured for UDMA/133
[   12.966046] ata1.03: ATA-8: ST2000DL001-9VT156, CC41, max UDMA/133
[   12.972197] ata1.03: 3907029168 sectors, multi 0: LBA48
[   13.036053] ata1.03: configured for UDMA/133
[   13.040483] ata1: EH complete
[   13.056278] scsi 0:1:0:0: Direct-Access     ATA      ST2000DL001-9VT1 CC41 PQ: 0 ANSI: 5
[   13.064858] fvdw1 disk index before get_sd_name = 0
[   13.069762] device-name= sata_mv
[   13.072971] fvdw2 disk index after get_sd_name = 2
[   13.077870] fvdw3 prefix[0]=s  prefix[1]=d
[   13.081947] fvdw4 diskname = sdc
[   13.085650] sd 0:1:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   13.093734] sd 0:1:0:0: Attached scsi generic sg0 type 0
[   13.099112] sd 0:1:0:0: [sdc] 4096-byte physical blocks
[   13.104797] scsi 0:2:0:0: Direct-Access     ATA      ST2000DL001-9VT1 CC41 PQ: 0 ANSI: 5
[   13.113137] sd 0:1:0:0: [sdc] Write Protect is off
[   13.117941] sd 0:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[   13.118049] sd 0:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.127531] fvdw1 disk index before get_sd_name = 1
[   13.132388] device-name= sata_mv
[   13.135602] fvdw2 disk index after get_sd_name = 1
[   13.141339] fvdw3 prefix[0]=s  prefix[1]=d
[   13.145418] fvdw4 diskname = sdb
[   13.149148] sd 0:2:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   13.157244] sd 0:2:0:0: Attached scsi generic sg1 type 0
[   13.162709] sd 0:2:0:0: [sdb] 4096-byte physical blocks
[   13.168254] scsi 0:3:0:0: Direct-Access     ATA      ST2000DL001-9VT1 CC41 PQ: 0 ANSI: 5
[   13.176812] sd 0:2:0:0: [sdb] Write Protect is off
[   13.181686] sd 0:2:0:0: [sdb] Mode Sense: 00 3a 00 00
[   13.182096] sd 0:2:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.191661] fvdw1 disk index before get_sd_name = 2
[   13.196573] device-name= sata_mv
[   13.199789] fvdw2 disk index after get_sd_name = 0
[   13.204557] fvdw3 prefix[0]=s  prefix[1]=d
[   13.209661] fvdw4 diskname = sda
[   13.213590] sd 0:3:0:0: Attached scsi generic sg2 type 0
[   13.251514] sd 0:3:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   13.259380] sd 0:3:0:0: [sda] 4096-byte physical blocks
[   13.265819]  sdc: sdc8
[   13.268856] sd 0:3:0:0: [sda] Write Protect is off
[   13.273633] sd 0:3:0:0: [sda] Mode Sense: 00 3a 00 00
[   13.274631] sd 0:1:0:0: [sdc] Attached SCSI disk
[   13.279342] sd 0:3:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.358032]  sdb: sdb8
[   13.361612] sd 0:2:0:0: [sdb] Attached SCSI disk
[   13.367515]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[   13.375914] sd 0:3:0:0: [sda] Attached SCSI disk
[   13.596012] rtc-mv rtc-mv: internal RTC not ticking
[   13.601144] i2c /dev entries driver
[   13.605671] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[   13.625091] md: linear personality registered for level -1
[   13.630587] md: raid0 personality registered for level 0
[   13.635876] md: raid1 personality registered for level 1
[   13.641274] md: raid10 personality registered for level 10
[   13.646910] md: raid6 personality registered for level 6
[   13.652196] md: raid5 personality registered for level 5
[   13.657526] md: raid4 personality registered for level 4
[   13.663022] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[   13.671672] device-mapper: multipath: version 1.6.0 loaded
[   13.677170] device-mapper: multipath round-robin: version 1.0.0 loaded
[   13.683664] device-mapper: multipath queue-length: version 0.1.0 loaded
[   13.690273] device-mapper: multipath service-time: version 0.2.0 loaded
[   13.696935] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   13.703001] device-mapper: raid: Loading target version 1.5.2
[   13.712922] ipip: IPv4 over IPv4 tunneling driver
[   13.718431] TCP: cubic registered
[   13.721772] NET: Registered protocol family 10
[   13.726252] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   13.733203] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f
[   13.742011] sit: IPv6 over IPv4 tunneling driver
[   13.748023] NET: Registered protocol family 17
[   13.752955] NET: Registered protocol family 5
[   13.757947] 8021q: 802.1Q VLAN Support v1.8
[   13.762149] NET: Registered protocol family 37
[   13.767839] Key type dns_resolver registered
[   13.775150] netpoll: netconsole: local port 6666
[   13.780086] netpoll: netconsole: local IPv4 address 192.168.1.252
[   13.787152] netpoll: netconsole: interface 'eth0'
[   13.791837] netpoll: netconsole: remote port 6666
[   13.798142] netpoll: netconsole: remote IPv4 address 192.168.1.100
[   13.804296] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[   13.812039] ata2.00: hard resetting link
[   13.816637] netpoll: netconsole: device eth0 not up yet, forcing it
[   14.166777] ata2.01: hard resetting link
[   14.686276] ata2.02: hard resetting link
[   14.908137] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.206283] ata2.03: hard resetting link
[   15.596053] ata2.01: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133
[   15.602206] ata2.01: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   15.666061] ata2.01: configured for UDMA/133
[   15.706050] ata2.02: ATA-8: ST2000DL001-9VT156, CC41, max UDMA/133
[   15.712200] ata2.02: 3907029168 sectors, multi 0: LBA48
[   15.776055] ata2.02: configured for UDMA/133
[   15.780488] ata2: EH complete
[   15.796282] scsi 1:1:0:0: Direct-Access     ATA      ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5
[   15.804839] fvdw1 disk index before get_sd_name = 3
[   15.809748] device-name= sata_mv
[   15.812956] fvdw2 disk index after get_sd_name = 4
[   15.817754] fvdw3 prefix[0]=s  prefix[1]=d
[   15.821830] fvdw4 diskname = sde
[   15.825531] sd 1:1:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   15.833576] sd 1:1:0:0: Attached scsi generic sg3 type 0
[   15.838951] sd 1:1:0:0: [sde] 4096-byte physical blocks
[   15.844628] scsi 1:2:0:0: Direct-Access     ATA      ST2000DL001-9VT1 CC41 PQ: 0 ANSI: 5
[   15.852973] sd 1:1:0:0: [sde] Write Protect is off
[   15.857879] sd 1:1:0:0: [sde] Mode Sense: 00 3a 00 00
[   15.858261] sd 1:1:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   15.867402] fvdw1 disk index before get_sd_name = 4
[   15.872252] device-name= sata_mv
[   15.875457] fvdw2 disk index after get_sd_name = 3
[   15.881196] fvdw3 prefix[0]=s  prefix[1]=d
[   15.885274] fvdw4 diskname = sdd
[   15.889026] sd 1:2:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   15.897066] sd 1:2:0:0: Attached scsi generic sg4 type 0
[   15.902509] sd 1:2:0:0: [sdd] 4096-byte physical blocks
[   15.908777] sd 1:2:0:0: [sdd] Write Protect is off
[   15.913550] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[   15.913656] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   15.961172]  sde: sde8
[   15.964996] sd 1:1:0:0: [sde] Attached SCSI disk
[   16.003817]  sdd: sdd8
[   16.007445] sd 1:2:0:0: [sdd] Attached SCSI disk
[   17.705176] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[   17.715003] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.725403] console [netcon0] enabled
[   17.729123] netconsole: network logging started
[   17.734130] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   17.741237] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   17.753366] Freeing unused kernel memory: 1932K (c0767000 - c094a000)
[   18.845844] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   27.934547] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   27.944796] ehci-orion: EHCI orion driver
[   27.949011] orion-ehci orion-ehci.0: EHCI Host Controller
[   27.954434] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   27.962153] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[   27.986030] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[   27.992071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   27.998876] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   28.006100] usb usb1: Product: EHCI Host Controller
[   28.010972] usb usb1: Manufacturer: Linux 3.14.2 ehci_hcd
[   28.016379] usb usb1: SerialNumber: orion-ehci.0
[   28.021735] hub 1-0:1.0: USB hub found
[   28.025543] hub 1-0:1.0: 1 port detected
[   28.035958] usbcore: registered new interface driver usb-storage
[   28.346128] usb 1-1: new high-speed USB device number 2 using orion-ehci
[   28.496543] usb 1-1: New USB device found, idVendor=0424, idProduct=2512
[   28.503242] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   28.511183] hub 1-1:1.0: USB hub found
[   28.515037] hub 1-1:1.0: 2 ports detected
[   64.240661] random: nonblocking pool is initialized
root@fvdw-sta-kirkwood:/ #


Code: Select all

root@fvdw-sta-kirkwood:/ # e2fsck -y /dev/sda5
e2fsck 1.41.14 (22-Dec-2010)
/dev/sda5: recovering journal
Clearing orphaned inode 29937 (uid=0, gid=0, mode=0100666, size=0)
/dev/sda5: clean, 116/52304 files, 8268/208845 blocks
root@fvdw-sta-kirkwood:/ #


Code: Select all

root@fvdw-sta-kirkwood:/ # mkdir /sda5
root@fvdw-sta-kirkwood:/ # mount /dev/sda5 /sda5
root@fvdw-sta-kirkwood:/ # dmesg
[  201.929503] kjournald starting.  Commit interval 5 seconds
[  201.935033] EXT3-fs (sda5): using internal journal
[  201.939876] EXT3-fs (sda5): mounted filesystem with ordered data mode
root@fvdw-sta-kirkwood:/ #

[Draftmancorp]

I LOVE YOU JOCKO!!!
The nas is resurrected, i can enter in its we binterface :hail