Having Issues with my NAS. Shares missing, WebUI broken.

[Woodani]

Here is the output of those commands.

Code: Select all

root@fvdwsl-base:/ # cat /proc/sys/dev/raid/speed_limit_max
200000
root@fvdwsl-base:/ # cat /sys/class/block/md0/md/sync_speed_max
20000 (local)

My NAS is hosting the files for my Plex server but the server runs on another PC the NAS is only acting as file storage. I don't think it should matter but I can shut down my Plex server until this process is needed if it is slowing it down.

[Jocko]

Ok all is right.

I don't think it should matter but I can shut down my Plex server until this process is needed if it is slowing it down

Anyhow you can easily check that! So repeat first 2 or 3 times the command

Code: Select all

cat /proc/mdstat

. This will give you an average speed. Then stop plex (or maybe unmount the nas sharing) and wait around 1 or 2 minutes. Repeat the command

Code: Select all

cat /proc/mdstat

and check if the speed is faster

[Woodani]

Ok. I did as you said and It didn't seem to make much difference if my plex server was running or not. I got between 3300k/s and 3000k/s before and after shutting down my plex server.

[Woodani]

My resize process finally completed.

Code: Select all

root@fvdwsl-base:/ # cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md0 : active raid5 sda8[0] sde8[4] sdd8[3] sdc8[2] sdb8[1]
      15616464896 blocks super 1.0 level 5, 128k chunk, algorithm 2 [5/5] [UUUUU]

unused devices: <none>

Is there anything else I need to do now?

Thanks.