help slot error ?? it only starts with two slots

[fvdw]

when using uboot console you should get this output

Code: Select all

provided by fvdw
waiting for u-boot..
starting u-boot net console click on window and press enter


Marvell>>

The fact that you get no lump received must be because fvdw-sl console cannot find the nas in your lan, this can happen if you have more then 1 network card active.

As requested earlier please post a screen shot of window 10 network connections (adapters) (see a few post above where to find them in windows 10) (windows 10 control panel >network and internet> network connections)

[fvdw]

I do a test, I only connect the router with the nas and the pc without internet and see how it behaves :hail

that is a useless test, internet connection has nothing to do with it. You must have multiple network cards active that cause this problem

[taetae]

https://ibb.co/N23qp78

i only have this network card

[fvdw]

oke. I see you use a fritz box as router. Other users with a fritzbox mention simular issues of not being able to connect the fvdw-sl console to the nas.
Apparently the fritzbox does not allow broadcasting on the lan which is required for using the fvdw-sl console.
You could check if fritz box has this option to be enable or disable broadcasting, if so enable it.
If the fritz box doesn't have that option then you will need another router or connect your nas to your pc and enable dhcp server on your pc

[fvdw]

ps what is the ip pool you have set on your fritz box for dhcp server ?

[taetae]

as I told you the problem was on the router now by disconnecting it and making a direct connection I can access the telnet .....
now I have console and only one hd inserted what command should I give to control the sata ports?

Code: Select all

root@fvdw-sta-kirkwood:/ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #171 PREEMPT Wed Jan 17 23:33:31 CET 2018
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: LaCie 5Big Network Nand v2
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0982898, node_mem_map dfbfb000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.1.252/,6666@192.168.1.2/ cap=gpt,lba64
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 509780K/524288K available (5950K kernel code, 220K rwdata, 1596K rodata, 1933K init, 233K bss, 14508K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0766b44   (7547 kB)
[    0.000000]       .init : 0xc0767000 - 0xc094a4cc   (1934 kB)
[    0.000000]       .data : 0xc094c000 - 0xc0983100   ( 221 kB)
[    0.000000]        .bss : 0xc098310c - 0xc09bd56c   ( 234 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:114
[    0.000012] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[    0.707001] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[    0.796972] pid_max: default: 32768 minimum: 301
[    0.797107] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.797126] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.797671] CPU: Testing write buffer coherency: ok
[    0.797981] Setting up static identity map for 0x5a6ac0 - 0x5a6b18
[    0.800613] VFP support v0.3: not present
[    0.801147] xor: measuring software checksum speed
[    0.897000]    arm4regs  :  1089.200 MB/sec
[    0.996966]    8regs     :   654.400 MB/sec
[    1.096956]    32regs    :   905.600 MB/sec
[    1.096973] xor: using function: arm4regs (1089.200 MB/sec)
[    1.096990] pinctrl core: initialized pinctrl subsystem
[    1.097108] NET: Registered protocol family 16
[    1.097489] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    1.100211] Kirkwood: MV88F6281-A1, TCLK=166666667.
[    1.100236] Feroceon L2: Enabling L2
[    1.100273] Feroceon L2: Cache support initialised.
[    1.101364] mv_usb_init 1
[    1.101383] mv_usb_init 2 devnum = 0
[    1.101395] init function mv_usb_init finished
[    1.101403] initial MPP regs: 01111111 00003311 33331100 33003333 00000033 00000000 00000000
[    1.101434]   final MPP regs: 01111111 00003311 33331100 33003333 00000033 00000000 00000000
[    1.101619]  orion-ehci registered
[    1.103448] orion_gpio_is_valid: invalid GPIO 7
[    1.103949] Kirkwood PCIe port 0: link down
[    1.103959] Kirkwood PCIe port 1: link up
[    1.103968] PCI: bus0 uses PCIe port 0
[    1.104207] PCI host bridge to bus 0000:00
[    1.104228] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[    1.104242] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[    1.104255] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.104302] pci 0000:00:00.0: [11ab:6281] type 00 class 0x058000
[    1.104331] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
[    1.104349] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x1fffffff]
[    1.104399] pci 0000:00:00.0: supports D1 D2
[    1.104673] PCI: bus0: Fast back to back transfers disabled
[    1.104692] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.104704] PCI: bus1 uses PCIe port 1
[    1.104928] PCI host bridge to bus 0000:01
[    1.104947] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff]
[    1.104961] pci_bus 0000:01: root bus resource [io  0x10000-0x1ffff]
[    1.104973] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[    1.105011] PCI: bus1: Fast back to back transfers enabled
[    1.105025] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.129201] bio: create slab <bio-0> at 0
[    1.298123] raid6: int32x1     95 MB/s
[    1.467114] raid6: int32x2    123 MB/s
[    1.637188] raid6: int32x4    120 MB/s
[    1.807053] raid6: int32x8    128 MB/s
[    1.807063] raid6: using algorithm int32x8 (128 MB/s)
[    1.807071] raid6: using intx1 recovery algorithm
[    1.807903] SCSI subsystem initialized
[    1.808359] libata version 3.00 loaded.
[    1.809240] usbcore: registered new interface driver usbfs
[    1.809414] usbcore: registered new interface driver hub
[    1.809607] usbcore: registered new device driver usb
[    1.812089] cfg80211: Calling CRDA to update world regulatory domain
[    1.812356] Switched to clocksource orion_clocksource
[    1.814627] NET: Registered protocol family 2
[    1.815094] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    1.815153] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    1.815204] TCP: Hash tables configured (established 4096 bind 4096)
[    1.815258] TCP: reno registered
[    1.815271] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.815293] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.815484] NET: Registered protocol family 1
[    1.815755] RPC: Registered named UNIX socket transport module.
[    1.815766] RPC: Registered udp transport module.
[    1.815773] RPC: Registered tcp transport module.
[    1.815780] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.815801] PCI: CLS 32 bytes, default 32
[    1.962376] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.962501] gpio-usb-probe-4b err=0
[    1.962516] gpio-usb gpio-usb: USB GPIO's initialized
[    1.964110] futex hash table entries: 256 (order: -1, 3072 bytes)
[    2.065773] VFS: Disk quotas dquot_6.5.2
[    2.065822] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.066254] NFS: Registering the id_resolver key type
[    2.066317] Key type id_resolver registered
[    2.066326] Key type id_legacy registered
[    2.066345] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.066358] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.066459] NTFS driver 2.1.30 [Flags: R/W].
[    2.066490] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    2.066634] fuse init (API version 7.22)
[    2.067254] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    2.067668] msgmni has been set to 995
[    2.068785] async_tx: api initialized (async)
[    2.068970] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.068983] io scheduler noop registered
[    2.068991] io scheduler deadline registered
[    2.069011] io scheduler cfq registered (default)
[    2.069389] mv_xor mv_xor.0: Marvell shared XOR driver
[    2.106983] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[    2.146979] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[    2.147230] mv_xor mv_xor.1: Marvell shared XOR driver
[    2.186978] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[    2.226978] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[    2.232867] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    2.253983] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[    2.880028] console [ttyS0] enabled
[    2.892917] brd: module loaded
[    2.900622] loop: module loaded
[    2.904057] Uniform Multi-Platform E-IDE driver
[    2.908926] ide-gd driver 1.18
[    2.913475] sata_mv sata_mv.0: version 1.28
[    2.913539] sata_mv sata_mv.0: cannot get optional clkdev
[    2.919371] sata_mv sata_mv.0: slots 32 ports 2
[    2.926920] scsi0 : sata_mv
[    2.930432] scsi1 : sata_mv
[    2.933623] ata1: SATA max UDMA/133 irq 21
[    2.937822] ata2: SATA max UDMA/133 irq 21
[    2.944073] nand: Could not find valid ONFI parameter page; aborting
[    2.950510] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
[    2.956836] nand: Hynix NAND 256MiB 3,3V 8-bit
[    2.961365] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    2.967046] Scanning device for bad blocks
[    2.997985] Bad eraseblock 337 at 0x000002a20000
[    3.138639] Creating 3 MTD partitions on "orion_nand":
[    3.143758] 0x000000000000-0x000000100000 : "u-boot"
[    3.149859] 0x000000100000-0x000001100000 : "uImage"
[    3.155878] 0x000001100000-0x000010000000 : "root"
[    3.163823] tun: Universal TUN/TAP device driver, 1.6
[    3.168924] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.175266] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    3.183656] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    3.200012] libphy: orion_mdio_bus: probed
[    3.204255] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    3.446952] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[    3.466947] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f
[    3.528590] ata1.00: hard resetting link
[    3.877707] ata1.01: hard resetting link
[    4.237701] ata1.02: hard resetting link
[    4.327210] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:92:5c:4b
[    4.597706] ata1.03: hard resetting link
[    4.957885] ata1: EH complete
[    5.418536] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:d0:4b:92:5c:4c
[    5.427374] PPP generic driver version 2.4.2
[    5.431956] PPP Deflate Compression module registered
[    5.437047] PPP MPPE Compression module registered
[    5.441811] NET: Registered protocol family 24
[    5.446421] usbcore: registered new interface driver rtl8187
[    5.452105] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    5.459687] usbcore: registered new interface driver pegasus
[    5.465520] usbcore: registered new interface driver asix
[    5.471076] usbcore: registered new interface driver ax88179_178a
[    5.477343] usbcore: registered new interface driver cdc_ether
[    5.483322] usbcore: registered new interface driver net1080
[    5.489004] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[    5.495532] usbcore: registered new interface driver cdc_subset
[    5.502098] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f
[    5.509979] usbcore: registered new interface driver zaurus
[    5.515968] usbcore: registered new interface driver ipheth
[    5.522660] usbcore: registered new interface driver cdc_ncm
[    5.531201] aoe: cannot create debugfs directory
[    5.536424] aoe: AoE v85 initialised.
[    5.541891] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[    5.548498] i2c /dev entries driver
[    5.554182] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[    5.562949] ata2.00: hard resetting link
[    5.579161] md: linear personality registered for level -1
[    5.584623] md: raid0 personality registered for level 0
[    5.590198] md: raid1 personality registered for level 1
[    5.595483] md: raid10 personality registered for level 10
[    5.601170] md: raid6 personality registered for level 6
[    5.606455] md: raid5 personality registered for level 5
[    5.611783] md: raid4 personality registered for level 4
[    5.617280] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    5.625903] device-mapper: multipath: version 1.6.0 loaded
[    5.631396] device-mapper: multipath round-robin: version 1.0.0 loaded
[    5.637924] device-mapper: multipath queue-length: version 0.1.0 loaded
[    5.644506] device-mapper: multipath service-time: version 0.2.0 loaded
[    5.651181] device-mapper: dm-log-userspace: version 1.3.0 loaded
[    5.657265] device-mapper: raid: Loading target version 1.5.2
[    5.667135] ipip: IPv4 over IPv4 tunneling driver
[    5.672594] TCP: cubic registered
[    5.675938] NET: Registered protocol family 10
[    5.681363] sit: IPv6 over IPv4 tunneling driver
[    5.686821] NET: Registered protocol family 17
[    5.691537] NET: Registered protocol family 5
[    5.695965] 8021q: 802.1Q VLAN Support v1.8
[    5.700383] NET: Registered protocol family 37
[    5.704832] Key type dns_resolver registered
[    5.710352] netpoll: netconsole: local port 6666
[    5.714950] netpoll: netconsole: local IPv4 address 192.168.1.252
[    5.721118] netpoll: netconsole: interface 'eth0'
[    5.725800] netpoll: netconsole: remote port 6666
[    5.730559] netpoll: netconsole: remote IPv4 address 192.168.1.2
[    5.736540] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[    5.743416] netpoll: netconsole: device eth0 not up yet, forcing it
[    5.917709] ata2.01: hard resetting link
[    6.277703] ata2.02: hard resetting link
[    6.637703] ata2.03: hard resetting link
[    6.844802] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.997890] ata2: EH complete
[    9.581867] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[    9.591688] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.600944] console [netcon0] enabled
[    9.604601] netconsole: network logging started
[    9.609669] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    9.616769] rtc-mv rtc-mv: setting system clock to 2020-12-05 23:00:42 UTC (1607209242)
[    9.630639] Freeing unused kernel memory: 1932K (c0767000 - c094a000)
[   10.726923] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   19.795403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   19.805622] ehci-orion: EHCI orion driver
[   19.809973] orion-ehci orion-ehci.0: EHCI Host Controller
[   19.815400] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   19.823129] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[   19.846962] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[   19.853015] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   19.859815] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.867039] usb usb1: Product: EHCI Host Controller
[   19.871911] usb usb1: Manufacturer: Linux 3.14.2 ehci_hcd
[   19.877319] usb usb1: SerialNumber: orion-ehci.0
[   19.882621] hub 1-0:1.0: USB hub found
[   19.886428] hub 1-0:1.0: 1 port detected
[   19.896882] usbcore: registered new interface driver usb-storage
[   20.206968] usb 1-1: new high-speed USB device number 2 using orion-ehci
[   20.357524] usb 1-1: New USB device found, idVendor=0424, idProduct=2512
[   20.364228] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   20.372172] hub 1-1:1.0: USB hub found
[   20.376013] hub 1-1:1.0: 2 ports detected
root@fvdw-sta-kirkwood:/ #


ps what is the ip pool you have set on your fritz box for dhcp server ?

192.168.1.2/192.168.1.254

[fvdw]

post the output of

Code: Select all

dmesg

and

Code: Select all

cat /proc/partitions

[fvdw]

I see no disk in dmesg output

what does

Code: Select all

fdisk -l

gives as output

[fvdw]

and in which slot is your harddisk?

[taetae]

Code: Select all

cat /proc/partitions

Code: Select all

root@fvdw-sta-kirkwood:/ # cat /proc/partitions
major minor  #blocks  name

  31        0       1024 mtdblock0
  31        1      16384 mtdblock1
  31        2     244736 mtdblock2


and in which slot is your harddisk?

https://ibb.co/v4rV8mk
just a blank disk in station one red color