Top of the WebGUI shows Current System Status: Fail: can not upgrade the firmware(681)
Log of steps:
- Code: Select all
=> Firmware upgrade step 1 started:
Search firmware version information for 5big2 ...
The latest version available from http://plugout.net is: fvdw-sl 18.2
Check free space on system partition ... OK
Get the bound upgrade files list
Retrieve the firmware package
Try to download part 1 on 5...
Attempt 1: OK, got successful the firmware package part1 file
Try to download part 2 on 5...
Attempt 1: OK, got successful the firmware package part2 file
Try to download part 3 on 5...
Attempt 1: OK, got successful the firmware package part3 file
Try to download part 4 on 5...
Attempt 1: OK, got successful the firmware package part4 file
Try to download part 5 on 5...
Attempt 1: OK, got successful the firmware package part5 file
Extract firmware package...
OK, extract successful the firmware package
Retrieve kernel image file for kirkwood...
Attempt 1: OK, got successful the kernel image file
OK: Retrieve the latest firmware image file successful
=> Firmware upgrade step 2 started:
Firmware package uploaded via fvdw-sl server
package type: new configuration (version > 16.1)
firmware image type: extended file system (version > 17.0)
Check firmware files archive ... OK
Detect family type... OK
Check kernel version... OK
Check DATABASE file... OK
Check active partition... OK
Install new common firmware files on /dev/sda1, ... OK
Install new firmware files for 5big2, ... OK
Update DATABASE... Fail
could not save the cleaned database
After seeing that result, I've just left it as is as I don't want to do anything that could cause a problem. I also don't know if it can be safely rebooted (or if it wouldn't come back up if power was lost). The button for Step 2 is still shown but I haven't tried to make it repeat the step either and wanted to check here first.