plugout.net

by **fvdw** » Mon Apr 22, 2019 8:00 pm

yes it is busybox-org so you can proceed

by **Draftmancorp** » Mon Apr 22, 2019 8:05 pm

i edit the post, you can see the second part.

by **fvdw** » Mon Apr 22, 2019 8:06 pm

:thumbup seems good, reboot and keep your fingers crossed that firmware comes up

by **Draftmancorp** » Mon Apr 22, 2019 8:09 pm

fvdw wrote::thumbup seems good, reboot and keep your fingers crossed that firmware comes up

:woohoo
Assistant see the nas...
Putty open connection to port 22...
And i see the web page!

by **fvdw** » Mon Apr 22, 2019 8:13 pm

:punk finally

So you can go on with your nas, leave it at static ip for the moment, I will think over why we cannot use dynamic ip on your LAN. But I now go to do some other things first

ps please note that have to install a roll up patch for fvdw-sl-17-0 and also enter you plugout username and plugout password in system management setup webpage of the webinterface to be able to install addons

see you later

by **Draftmancorp** » Mon Apr 22, 2019 8:19 pm

fvdw wrote::punk finally

So you can go on with your nas, leave it at static ip for the moment, I will think over why we cannot use dynamic ip on your LAN. But I now go to do some other things first
ps please note that have to install a roll up patch for fvdw-sl-17-0 and also enter you plugout username and plugout password in system management setup webpage of the webinterface to be able to install addons
see you later

Ok, i'm going to see the patch.
Yes i'm already enter the credential in the forum page of Nas web page :thumbup
thank you very much @fvdw :hail

by **Draftmancorp** » Mon Apr 22, 2019 8:20 pm

fvdw wrote::punk finally

So you can go on with your nas, leave it at static ip for the moment, I will think over why we cannot use dynamic ip on your LAN. But I now go to do some other things first
ps please note that have to install a roll up patch for fvdw-sl-17-0 and also enter you plugout username and plugout password in system management setup webpage of the webinterface to be able to install addons
see you later

Ok, i'm going to see the patch.
Yes i'm already enter the credential in the forum page of Nas web page :thumbup
thank you very much for your time @fvdw :hail

by **Draftmancorp** » Mon Apr 22, 2019 10:02 pm

fvdw wrote::punk finally
So you can go on with your nas, leave it at static ip for the moment, I will think over why we cannot use dynamic ip on your LAN. But I now go to do some other things first
ps please note that have to install a roll up patch for fvdw-sl-17-0 and also enter you plugout username and plugout password in system management setup webpage of the webinterface to be able to install addons
see you later

Sorry fvdw, a little question.
I don't see raid6 function...and I think its becouse uou can't use the first disk in a raid volume...right?
Do you think that is not possible doing a raid 6 even in the next release?

by **fvdw** » Tue Apr 23, 2019 8:32 pm

Hi, currently the firmware doesn't support raid6.
But yiu can include all 5 disks in raid5. Of course all five shoukd have preferrable same size to get maximum raid size

by **Draftmancorp** » Wed Apr 24, 2019 5:08 am

:thumbup yes thanks.

plugout.net

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Who is online