RSYNC to FVDW firmware

[macdalor]

I am trying to setup a weekly backup from a QNAP TVS471 to a Lacie5BigN2 running the FVDW firmware and although I could setup the RSYNC server fine on the Lacie side and connect to it (success msg from QNAP side), Qnap doesn't see the subfolders created in my RAID partition.
When I setup the QNAP Client side, I get a "success" message and then a "processing" one lasting forever.

Screen Shot 2016-09-18 at 22.06.52.png

From the FVDW RSYNC log I get the following

Code: Select all

2016/09/18 20:00:44 [3331] connect from Q-NAS.local (192.168.1.40)
2016/09/18 20:00:44 [3331] unknown module 'Welcometothersyncfvdwsl-baseserver' tried from Q-NAS.local (192.168.1.40)

Why do I get an "Unkown Module" message? Shouldn't it be connecting to the selected module from the FVDW Module TAB?

ps: My RSYNC server is Started & Enabled from FVDW

Thx!

[Jocko]

Ok if you have enable the rsync server on fvdw-sl but do you have set a full access on some modules (=shares) for the user account "macdalor"

[macdalor]

yes, this user has full access to the share and I can access the share fine via the windows file browser. I have tried creating a subfolder just in case but no success...
I've also tried with the admin-nas login and still the same...

[Jocko]

My ask was what setting for this user account in the tab "modules" of the rsync server menu

[macdalor]

My ask was what setting for this user account in the tab "modules" of the rsync server menu

I do not have the server in front of me as I am at work but from what I remember there are 3 options: "Read Only", "none" and "full access".

The "Full access" is selected

[Jocko]

Please to read its help page! (chapI): http://plugout.net/fvdw-sl/.help/rsync_settings_m_hlp.htm

[macdalor]

Please to read its help page! (chapI): http://plugout.net/fvdw-sl/.help/rsync_settings_m_hlp.htm

I thought I did...I'll revise this evening when I go back home as I might have missed something...

[macdalor]

I don't see what I've missed...

port 873 has been opened
The user has been assigned full access to the share
RSYNC server has been enabled and started
I can connect from the client side

The only negative point is that the server shares aren't listed on client side...

:dontknow

Anything I need to do with SSH on server maybe?

[Jocko]

According with the help page: do you have enable the share as module ?

No you do not need to use ssh connexion as you work on your LAN!

[macdalor]

According with the help page: do you have enable the share as module ?

yes I have...

edit: for some reason I cannot attach the screen to show you...but it is enabled in modules...