plugout.net

by **pacco** » Tue May 19, 2015 8:10 am

Jocko wrote:
fvdw wrote:ps1 transporting large files via ftp in busybox may be a problem. Why don't you hook up an usb disk ? The usb mass storage driver is included in the kirkwood standalone kernel. You may need to mount the usb device and it should be formatted in ext3 or xfs.
Just because pacco doesn't have yet an unused USB disk (but later)

Inserted a 2TB usb disk, but the system does not recognize it. There are no partitions on this disk, completely wiped.

Please help!

Code: Select all: root@fvdw-sta-kirkwood:/ # ls -l /dev/* crw-rw---- 1 root root 189, 19 May 3 11:01 /dev/1-1.2 lrwxrwxrwx 1 root root 6 May 3 11:01 /dev/X0R -> ./null lrwxrwxrwx 1 root root 4 May 3 11:01 /dev/XOR -> null crw-rw---- 1 root root 10, 72 May 3 11:01 /dev/btns lrwxrwxrwx 1 root root 5 May 3 11:01 /dev/console -> ttyS0 lrwxrwxrwx 1 root root 11 May 3 11:01 /dev/core -> /proc/kcore crw-rw---- 1 root root 10, 61 May 3 11:01 /dev/cpu_dma_latency crw-rw---- 1 root root 10, 63 May 3 11:01 /dev/cuse crw-rw---- 1 root root 152, 3 May 3 11:01 /dev/discover crw-rw---- 1 root root 152, 2 May 3 11:01 /dev/err crw-rw---- 1 root root 13, 64 May 3 11:01 /dev/event0 crw-rw---- 1 root root 152, 6 May 3 11:01 /dev/flush crw-rw---- 1 root root 1, 7 May 3 11:01 /dev/full crw-rw---- 1 root root 10, 229 May 3 11:01 /dev/fuse crw-rw---- 1 root root 89, 0 May 3 11:01 /dev/i2c-0 brw-rw-r-- 1 root root 1, 250 May 3 11:01 /dev/initrd crw-rw---- 1 root root 10, 63 May 3 11:01 /dev/inotify crw-rw---- 1 root root 152, 4 May 3 11:01 /dev/interfaces crw-rw---- 1 root root 1, 2 May 3 11:01 /dev/kmem crw-rw---- 1 root root 1, 11 May 3 11:01 /dev/kmsg brw-rw---- 1 root root 7, 0 May 3 11:01 /dev/loop0 brw-rw---- 1 root root 7, 1 May 3 11:01 /dev/loop1 brw-rw---- 1 root root 7, 2 May 3 11:01 /dev/loop2 brw-rw---- 1 root root 7, 3 May 3 11:01 /dev/loop3 brw-rw---- 1 root root 7, 4 May 3 11:01 /dev/loop4 brw-rw---- 1 root root 7, 5 May 3 11:01 /dev/loop5 brw-rw---- 1 root root 7, 6 May 3 11:01 /dev/loop6 brw-rw---- 1 root root 7, 7 May 3 11:01 /dev/loop7 brw-r--r-- 1 root root 7, 8 May 3 11:01 /dev/loop8 brw-r--r-- 1 root root 7, 9 May 3 11:01 /dev/loop9 brw-r----- 1 root root 9, 0 May 3 11:01 /dev/md0 brw-r----- 1 root root 9, 1 May 3 11:01 /dev/md1 brw-r----- 1 root root 9, 10 May 3 11:01 /dev/md10 brw-r----- 1 root root 9, 11 May 3 11:01 /dev/md11 brw-r----- 1 root root 9, 12 May 3 11:01 /dev/md12 brw-r----- 1 root root 9, 13 May 3 11:01 /dev/md13 brw-r----- 1 root root 9, 14 May 3 11:01 /dev/md14 brw-r----- 1 root root 9, 15 May 3 11:01 /dev/md15 brw-r----- 1 root root 9, 16 May 3 11:01 /dev/md16 brw-r----- 1 root root 9, 17 May 3 11:01 /dev/md17 brw-r----- 1 root root 9, 2 May 3 11:01 /dev/md2 brw-r----- 1 root root 9, 3 May 3 11:01 /dev/md3 brw-r----- 1 root root 9, 4 May 3 11:01 /dev/md4 brw-r----- 1 root root 9, 5 May 3 11:01 /dev/md5 brw-r----- 1 root root 9, 6 May 3 11:01 /dev/md6 brw-r----- 1 root root 9, 7 May 3 11:01 /dev/md7 brw-r----- 1 root root 9, 8 May 3 11:01 /dev/md8 brw-r----- 1 root root 9, 9 May 3 11:01 /dev/md9 crw-rw---- 1 root root 1, 1 May 3 11:01 /dev/mem crw-rw---- 1 root root 13, 63 May 3 11:01 /dev/mice lrwxrwxrwx 1 root root 4 May 3 11:01 /dev/mtd -> mtd0 crw-rw---- 1 root root 90, 0 May 3 11:01 /dev/mtd0 crw-rw---- 1 root root 90, 1 May 3 11:01 /dev/mtd0ro crw-rw---- 1 root root 90, 2 May 3 11:01 /dev/mtd1 crw-rw---- 1 root root 90, 3 May 3 11:01 /dev/mtd1ro crw-r--r-- 1 root root 90, 4 May 3 11:01 /dev/mtd2 crw-r--r-- 1 root root 90, 5 May 3 11:01 /dev/mtd2ro brw-rw---- 1 root root 31, 0 May 3 11:01 /dev/mtdblock0 brw-rw---- 1 root root 31, 1 May 3 11:01 /dev/mtdblock1 brw-r--r-- 1 root root 31, 2 May 3 11:01 /dev/mtdblock2 crw-rw---- 1 root root 10, 60 May 3 11:01 /dev/network_latency crw-rw---- 1 root root 10, 59 May 3 11:01 /dev/network_throughput lrwxrwxrwx 1 root root 9 May 3 11:01 /dev/nfsd -> ./socksys crw-rw-rw- 1 root root 1, 3 May 3 11:01 /dev/null crw-rw---- 1 root root 1, 4 May 3 11:01 /dev/port crw-rw---- 1 root root 108, 0 May 3 11:01 /dev/ppp crw-rw---- 1 root root 5, 2 May 19 07:55 /dev/ptmx crw-rw---- 1 root root 2, 0 May 3 11:01 /dev/ptyp0 crw-rw---- 1 root root 2, 1 May 3 11:01 /dev/ptyp1 crw-rw---- 1 root root 2, 2 May 3 11:01 /dev/ptyp2 crw-rw---- 1 root root 2, 3 May 3 11:01 /dev/ptyp3 crw-rw---- 1 root root 2, 4 May 3 11:01 /dev/ptyp4 crw-rw---- 1 root root 2, 5 May 3 11:01 /dev/ptyp5 crw-rw---- 1 root root 2, 6 May 3 11:01 /dev/ptyp6 crw-rw---- 1 root root 2, 7 May 3 11:01 /dev/ptyp7 crw-rw---- 1 root root 2, 8 May 3 11:01 /dev/ptyp8 crw-rw---- 1 root root 2, 9 May 3 11:01 /dev/ptyp9 crw-rw---- 1 root root 2, 10 May 3 11:01 /dev/ptypa crw-rw---- 1 root root 2, 11 May 3 11:01 /dev/ptypb crw-rw---- 1 root root 2, 12 May 3 11:01 /dev/ptypc crw-rw---- 1 root root 2, 13 May 3 11:01 /dev/ptypd crw-rw---- 1 root root 2, 14 May 3 11:01 /dev/ptype crw-rw---- 1 root root 2, 15 May 3 11:01 /dev/ptypf lrwxrwxrwx 1 root root 6 May 3 11:01 /dev/ram -> ./ram1 brw-rw---- 1 root root 1, 0 May 3 11:01 /dev/ram0 brw-rw---- 1 root root 1, 1 May 3 11:01 /dev/ram1 brw-rw---- 1 root root 1, 2 May 3 11:01 /dev/ram2 brw-rw---- 1 root root 1, 3 May 3 11:01 /dev/ram3 brw-rw---- 1 root root 1, 4 May 3 11:01 /dev/ram4 brw-rw---- 1 root root 1, 5 May 3 11:01 /dev/ram5 brw-rw---- 1 root root 1, 6 May 3 11:01 /dev/ram6 brw-rw---- 1 root root 1, 7 May 3 11:01 /dev/ram7 brw-rw---- 1 root root 1, 8 May 3 11:01 /dev/ram8 brw-rw---- 1 root root 1, 9 May 3 11:01 /dev/ram9 lrwxrwxrwx 1 root root 6 May 3 11:01 /dev/ramdisk -> ./ram0 cr--r--r-- 1 root root 1, 8 May 3 11:01 /dev/random crw-rw---- 1 root root 152, 5 May 3 11:01 /dev/revalidate lrwxrwxrwx 1 root root 9 May 3 11:01 /dev/rtc -> /dev/rtc0 crw-rw---- 1 root root 10, 135 May 3 11:01 /dev/rtc-old crw-rw---- 1 root root 254, 0 May 3 11:01 /dev/rtc0 brw-rw---- 1 root root 8, 0 May 3 11:01 /dev/sda brw-rw---- 1 root root 8, 1 May 3 11:01 /dev/sda1 brw-rw-rw- 1 root root 8, 10 May 3 11:01 /dev/sda10 brw-rw---- 1 root root 8, 2 May 3 11:01 /dev/sda2 brw-rw---- 1 root root 8, 3 May 3 11:01 /dev/sda3 brw-rw---- 1 root root 8, 4 May 3 11:01 /dev/sda4 brw-rw---- 1 root root 8, 5 May 3 11:01 /dev/sda5 brw-rw---- 1 root root 8, 6 May 3 11:01 /dev/sda6 brw-rw---- 1 root root 8, 7 May 3 11:01 /dev/sda7 brw-rw---- 1 root root 8, 8 May 3 11:01 /dev/sda8 brw-rw-rw- 1 root root 8, 9 May 3 11:01 /dev/sda9 brw-rw-r-- 1 root root 8, 16 May 3 11:01 /dev/sdb brw-r--r-- 1 root root 8, 17 May 3 11:01 /dev/sdb1 brw-r--r-- 1 root root 8, 18 May 3 11:01 /dev/sdb2 brw-rw---- 1 root root 8, 19 May 3 11:01 /dev/sdb3 brw-rw---- 1 root root 8, 20 May 3 11:01 /dev/sdb4 brw-rw---- 1 root root 8, 21 May 3 11:01 /dev/sdb5 brw-rw---- 1 root root 8, 22 May 3 11:01 /dev/sdb6 brw-rw---- 1 root root 8, 23 May 3 11:01 /dev/sdb7 brw-rw---- 1 root root 8, 24 May 3 11:01 /dev/sdb8 brw-rw---- 1 root root 8, 32 May 3 11:01 /dev/sdc brw-rw---- 1 root root 8, 33 May 3 11:01 /dev/sdc1 brw-rw---- 1 root root 8, 34 May 3 11:01 /dev/sdc2 brw-rw---- 1 root root 8, 35 May 3 11:01 /dev/sdc3 brw-rw---- 1 root root 8, 36 May 3 11:01 /dev/sdc4 brw-rw---- 1 root root 8, 37 May 3 11:01 /dev/sdc5 brw-rw---- 1 root root 8, 38 May 3 11:01 /dev/sdc6 brw-rw---- 1 root root 8, 39 May 3 11:01 /dev/sdc7 brw-rw---- 1 root root 8, 40 May 3 11:01 /dev/sdc8 brw-rw---- 1 root root 8, 64 May 3 11:01 /dev/sde brw-rw---- 1 root root 8, 65 May 3 11:01 /dev/sde1 brw-rw---- 1 root root 8, 66 May 3 11:01 /dev/sde2 crw-rw---- 1 root root 21, 0 May 3 11:01 /dev/sg0 lrwxrwxrwx 1 root root 15 May 3 11:01 /dev/stderr -> /proc/self/fd/2 lrwxrwxrwx 1 root root 15 May 3 11:01 /dev/stdin -> /proc/self/fd/0 lrwxrwxrwx 1 root root 15 May 3 11:01 /dev/stdout -> /proc/self/fd/1 lrwxrwxrwx 1 root root 6 May 3 11:01 /dev/systty -> ./tty0 crw-rw---- 1 root root 10, 62 May 3 11:01 /dev/tgt crw-rw-rw- 1 root root 5, 0 May 3 11:01 /dev/tty crw-rw---- 1 root root 4, 0 May 3 11:01 /dev/tty0 crw-rw---- 1 root root 4, 1 May 3 11:01 /dev/tty1 crw-rw---- 1 root root 4, 2 May 3 11:01 /dev/tty2 crw-rw---- 1 root root 4, 3 May 3 11:01 /dev/tty3 crw-rw---- 1 root root 4, 4 May 3 11:01 /dev/tty4 crw-rw---- 1 root root 4, 5 May 3 11:01 /dev/tty5 crw-rw---- 1 root root 4, 6 May 3 11:01 /dev/tty6 crw-rw---- 1 root root 4, 7 May 3 11:01 /dev/tty7 crw-rw---- 1 root root 4, 8 May 3 11:01 /dev/tty8 crw-rw---- 1 root root 4, 9 May 3 11:01 /dev/tty9 crwxrwxrwx 1 root root 4, 64 May 19 07:50 /dev/ttyS0 crw-rw---- 1 root root 4, 65 May 3 11:01 /dev/ttyS1 crw-rw---- 1 root root 4, 66 May 3 11:01 /dev/ttyS2 crw-rw---- 1 root root 4, 67 May 3 11:01 /dev/ttyS3 crw--w--w- 1 root root 3, 0 May 3 11:01 /dev/ttyp0 crw--w--w- 1 root root 3, 1 May 3 11:01 /dev/ttyp1 crw-rw---- 1 root 1005 3, 2 May 3 11:01 /dev/ttyp2 crw-rw---- 1 root root 3, 3 May 3 11:01 /dev/ttyp3 crw-rw---- 1 root root 3, 4 May 3 11:01 /dev/ttyp4 crw-rw---- 1 root root 3, 5 May 3 11:01 /dev/ttyp5 crw-rw---- 1 root root 3, 6 May 3 11:01 /dev/ttyp6 crw-rw---- 1 root root 3, 7 May 3 11:01 /dev/ttyp7 crw-rw---- 1 root root 3, 8 May 3 11:01 /dev/ttyp8 crw-rw---- 1 root root 3, 9 May 3 11:01 /dev/ttyp9 crw-rw---- 1 root root 3, 10 May 3 11:01 /dev/ttypa crw-rw---- 1 root root 3, 11 May 3 11:01 /dev/ttypb crw-rw---- 1 root root 3, 12 May 3 11:01 /dev/ttypc crw-rw---- 1 root root 3, 13 May 3 11:01 /dev/ttypd crw-rw---- 1 root root 3, 14 May 3 11:01 /dev/ttype crw-rw---- 1 root root 3, 15 May 3 11:01 /dev/ttypf crw-rw---- 1 root root 10, 200 May 3 11:01 /dev/tun cr--r--r-- 1 root root 1, 9 May 3 11:01 /dev/urandom crw-rw---- 1 root root 189, 0 May 3 11:01 /dev/usbdev1.1 crw-rw---- 1 root root 189, 15 May 3 11:01 /dev/usbdev1.16 crw-rw---- 1 root root 189, 17 May 3 11:01 /dev/usbdev1.18 crw-rw---- 1 root root 189, 19 May 3 11:01 /dev/usbdev1.20 crw-rw---- 1 root root 189, 6 May 3 11:01 /dev/usbdev1.7 crw-rw---- 1 root root 189, 8 May 3 11:01 /dev/usbdev1.9 crw-rw---- 1 root root 7, 0 May 3 11:01 /dev/vcs crw-rw---- 1 root root 7, 128 May 3 11:01 /dev/vcsa crw-rw-rw- 1 root root 1, 5 May 3 11:01 /dev/zero /dev/input: total 0 crw-r--r-- 1 root root 13, 64 May 3 11:01 event0 /dev/net: total 0 crw-r--r-- 1 root root 10, 200 May 3 11:01 tun /dev/pts: total 0 crw------- 1 root root 136, 0 May 19 07:55 0

by **Jocko** » Tue May 19, 2015 8:13 am

pacco wrote:Inserted a 2TB usb disk, but the system does not recognize it.

how do you see that?
the usb disk is not automatically mounted.

So post the content of /proc/partitions.

if it is missing maybe the driver is not loaded (and I think this). So post also the output of lsmod and the content of /lib/modules/3.14.2

Code: Select all: ls /lib/modules/3.14.2

by **Jocko** » Tue May 19, 2015 8:17 am

I think also that you need update your dev nodes (Currently your sde disk is sdd in /dev)

Indeed at each reboot you must do again all previous step as you use only RAM. (=> upload udevstart, mdam, start udevstart,...)

by **pacco** » Tue May 19, 2015 8:32 am

Jocko wrote:
pacco wrote:Inserted a 2TB usb disk, but the system does not recognize it.
how do you see that?
the usb disk is not automatically mounted.

So post the content of /proc/partitions.

if it is missing maybe the driver is not loaded (and I think this). So post also the output of lsmod

I rebooted, uploaded mdadm, started the array, connected the usb disk and started udevstart.
Previously I uploaded mdadm, udevstart while the usb disk was connected and the array couldn't start.

Outcome:

Code: Select all: root@fvdw-sta-kirkwood:/sbin # cat /proc/partitions major minor #blocks name 31 0 500 mtdblock0 31 1 4 mtdblock1 8 0 976762584 sdc 8 1 1 sdc1 8 2 974751907 sdc2 8 5 256977 sdc5 8 6 8001 sdc6 8 7 8001 sdc7 8 8 851413 sdc8 8 9 875511 sdc9 8 10 8001 sdc10 8 16 976762584 sdb 8 17 1 sdb1 8 18 974751907 sdb2 8 21 256977 sdb5 8 22 8001 sdb6 8 23 8001 sdb7 8 24 851413 sdb8 8 25 875511 sdb9 8 26 8001 sdb10 8 32 976762584 sda 8 33 1 sda1 8 34 974751907 sda2 8 37 256977 sda5 8 38 8001 sda6 8 39 8001 sda7 8 40 851413 sda8 8 41 875511 sda9 8 42 8001 sda10 8 48 976762584 sde 8 49 1 sde1 8 50 974751907 sde2 8 53 256977 sde5 8 54 8001 sde6 8 55 8001 sde7 8 56 851413 sde8 8 57 875511 sde9 8 58 8001 sde10 8 64 976762584 sdd 8 65 1 sdd1 8 66 974751907 sdd2 8 69 256977 sdd5 8 70 8001 sdd6 8 71 8001 sdd7 8 72 851413 sdd8 8 73 875511 sdd9 8 74 8001 sdd10 9 0 3899007232 md0 root@fvdw-sta-kirkwood:/sbin # lsmod root@fvdw-sta-kirkwood:/sbin #

by **Jocko** » Tue May 19, 2015 8:33 am

I need also the content of /lib/modules/3.14.2 (I edited my previous post)

by **pacco** » Tue May 19, 2015 8:36 am

Jocko wrote:I need also the content of /lib/modules/3.14.2 (I edited my previous post)

Code: Select all: root@fvdw-sta-kirkwood:/sbin # ls /lib/modules/3.14.2 ls: /lib/modules/3.14.2: No such file or directory root@fvdw-sta-kirkwood:/sbin # cd lib -sh: cd: can't cd to lib root@fvdw-sta-kirkwood:/sbin # cd /lib root@fvdw-sta-kirkwood:/lib # ls ld-2.17.so ld-linux.so.3 libc-2.17.so libc.so.6

by **Jocko** » Tue May 19, 2015 8:38 am

so do dmesg

by **pacco** » Tue May 19, 2015 8:41 am

Jocko wrote:so do dmesg

Code: Select all: root@fvdw-sta-kirkwood:/lib # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #10 PREEMPT Sun May 3 18:53:31 CEST 2015 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie 5Big Network v2 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c093325c, node_mem_map dfbfb000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.10.6/,6666@192.168.10.10/ [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 510100K/524288K available (5750K kernel code, 222K rwdata, 1548K rodata, 1861K init, 232K bss, 14188K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0728cd8 (7300 kB) [ 0.000000] .init : 0xc0729000 - 0xc08fa4dc (1862 kB) [ 0.000000] .data : 0xc08fc000 - 0xc0933ac0 ( 223 kB) [ 0.000000] .bss : 0xc0933acc - 0xc096dba8 ( 233 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:114 [ 0.000011] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns [ 17.482514] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) [ 17.572487] pid_max: default: 32768 minimum: 301 [ 17.572625] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 17.572643] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 17.573185] CPU: Testing write buffer coherency: ok [ 17.573496] Setting up static identity map for 0x5770c0 - 0x577118 [ 17.576103] VFP support v0.3: not present [ 17.576634] xor: measuring software checksum speed [ 17.672518] arm4regs : 1088.800 MB/sec [ 17.772475] 8regs : 654.400 MB/sec [ 17.872471] 32regs : 905.600 MB/sec [ 17.872487] xor: using function: arm4regs (1088.800 MB/sec) [ 17.872504] pinctrl core: initialized pinctrl subsystem [ 17.872621] NET: Registered protocol family 16 [ 17.872977] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 17.875702] Kirkwood: MV88F6281-A0, TCLK=166666667. [ 17.875727] Feroceon L2: Enabling L2 [ 17.875765] Feroceon L2: Cache support initialised. [ 17.876855] mv_usb_init 1 [ 17.876874] mv_usb_init 2 devnum = 0 [ 17.876886] init function mv_usb_init finished [ 17.876895] initial MPP regs: 01112222 00003311 33331100 33003333 00000033 00000000 00000000 [ 17.876926] final MPP regs: 01112222 00003311 33331100 33003333 00000033 00000000 00000000 [ 17.877111] orion-ehci registered [ 17.878938] orion_gpio_is_valid: invalid GPIO 7 [ 17.903146] bio: create slab <bio-0> at 0 [ 18.073660] raid6: int32x1 95 MB/s [ 18.242644] raid6: int32x2 123 MB/s [ 18.412625] raid6: int32x4 120 MB/s [ 18.582578] raid6: int32x8 128 MB/s [ 18.582587] raid6: using algorithm int32x8 (128 MB/s) [ 18.582595] raid6: using intx1 recovery algorithm [ 18.583426] SCSI subsystem initialized [ 18.583887] libata version 3.00 loaded. [ 18.584750] usbcore: registered new interface driver usbfs [ 18.584932] usbcore: registered new interface driver hub [ 18.585126] usbcore: registered new device driver usb [ 18.587612] cfg80211: Calling CRDA to update world regulatory domain [ 18.587856] Switched to clocksource orion_clocksource [ 18.590146] NET: Registered protocol family 2 [ 18.590610] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 18.590669] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 18.590721] TCP: Hash tables configured (established 4096 bind 4096) [ 18.590775] TCP: reno registered [ 18.590788] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 18.590811] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 18.590970] NET: Registered protocol family 1 [ 18.591247] RPC: Registered named UNIX socket transport module. [ 18.591258] RPC: Registered udp transport module. [ 18.591265] RPC: Registered tcp transport module. [ 18.591272] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 18.591283] PCI: CLS 0 bytes, default 32 [ 18.730807] NetWinder Floating Point Emulator V0.97 (double precision) [ 18.730933] gpio-usb-probe-4b err=0 [ 18.730949] gpio-usb gpio-usb: USB GPIO's initialized [ 18.732411] futex hash table entries: 256 (order: -1, 3072 bytes) [ 18.830501] VFS: Disk quotas dquot_6.5.2 [ 18.830552] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 18.830993] NFS: Registering the id_resolver key type [ 18.831079] Key type id_resolver registered [ 18.831090] Key type id_legacy registered [ 18.831107] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 18.831142] NTFS driver 2.1.30 [Flags: R/W]. [ 18.831173] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 18.831321] fuse init (API version 7.22) [ 18.831883] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 18.832289] msgmni has been set to 996 [ 18.833458] async_tx: api initialized (async) [ 18.833648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 18.833661] io scheduler noop registered [ 18.833669] io scheduler deadline registered [ 18.833693] io scheduler cfq registered (default) [ 18.834081] mv_xor mv_xor.0: Marvell shared XOR driver [ 18.872497] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 18.912492] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 18.912740] mv_xor mv_xor.1: Marvell shared XOR driver [ 18.952491] mv_xor mv_xor.1: Marvell XOR: ( xor cpy ) [ 18.992491] mv_xor mv_xor.1: Marvell XOR: ( xor cpy ) [ 18.998346] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 19.019447] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A [ 19.560876] console [ttyS0] enabled [ 19.573710] brd: module loaded [ 19.581330] loop: module loaded [ 19.585984] sata_mv sata_mv.0: version 1.28 [ 19.586049] sata_mv sata_mv.0: cannot get optional clkdev [ 19.591520] sata_mv sata_mv.0: slots 32 ports 2 [ 19.599118] scsi0 : sata_mv [ 19.602862] scsi1 : sata_mv [ 19.606085] ata1: SATA max UDMA/133 irq 21 [ 19.610166] ata2: SATA max UDMA/133 irq 21 [ 19.616948] m25p80 spi0.0: mx25l4005a (512 Kbytes) [ 19.621900] Creating 2 MTD partitions on "spi_flash": [ 19.627012] 0x000000000000-0x00000007d000 : "u-boot" [ 19.633237] 0x00000007e000-0x00000007f000 : "u-boot-env" [ 19.639807] tun: Universal TUN/TAP device driver, 1.6 [ 19.644894] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 19.651219] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 19.659452] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 19.675825] libphy: orion_mdio_bus: probed [ 19.680070] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 19.764132] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:90:e4:ca [ 19.854159] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:d0:4b:90:e4:cb [ 19.862999] PPP generic driver version 2.4.2 [ 19.867561] PPP Deflate Compression module registered [ 19.872651] PPP MPPE Compression module registered [ 19.877417] NET: Registered protocol family 24 [ 19.882028] usbcore: registered new interface driver rtl8187 [ 19.887729] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 19.895304] usbcore: registered new interface driver pegasus [ 19.901128] usbcore: registered new interface driver asix [ 19.906688] usbcore: registered new interface driver ax88179_178a [ 19.912947] usbcore: registered new interface driver cdc_ether [ 19.918921] usbcore: registered new interface driver net1080 [ 19.924763] usbcore: registered new interface driver cdc_subset [ 19.930829] usbcore: registered new interface driver zaurus [ 19.936601] usbcore: registered new interface driver ipheth [ 19.942350] usbcore: registered new interface driver cdc_ncm [ 19.949001] aoe: cannot create debugfs directory [ 19.953795] aoe: AoE v85 initialised. [ 19.957500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 19.964134] ehci-pci: EHCI PCI platform driver [ 19.968908] usbcore: registered new interface driver usb-storage [ 19.975451] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 19.981433] i2c /dev entries driver [ 19.985933] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write [ 20.008518] md: linear personality registered for level -1 [ 20.014073] md: raid0 personality registered for level 0 [ 20.019363] md: raid1 personality registered for level 1 [ 20.024720] md: raid10 personality registered for level 10 [ 20.030323] md: raid6 personality registered for level 6 [ 20.035647] md: raid5 personality registered for level 5 [ 20.040937] md: raid4 personality registered for level 4 [ 20.046445] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 20.055094] device-mapper: multipath: version 1.6.0 loaded [ 20.060551] device-mapper: multipath round-robin: version 1.0.0 loaded [ 20.067087] device-mapper: multipath queue-length: version 0.1.0 loaded [ 20.073690] device-mapper: multipath service-time: version 0.2.0 loaded [ 20.080334] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 20.086424] device-mapper: raid: Loading target version 1.5.2 [ 20.096292] ipip: IPv4 over IPv4 tunneling driver [ 20.101742] TCP: cubic registered [ 20.105167] NET: Registered protocol family 10 [ 20.110520] sit: IPv6 over IPv4 tunneling driver [ 20.116029] NET: Registered protocol family 17 [ 20.120468] NET: Registered protocol family 5 [ 20.124875] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 20.131977] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 20.139913] Key type dns_resolver registered [ 20.146810] netpoll: netconsole: local port 6666 [ 20.151410] netpoll: netconsole: local IPv4 address 192.168.10.6 [ 20.158585] netpoll: netconsole: interface 'eth0' [ 20.164003] netpoll: netconsole: remote port 6666 [ 20.168689] netpoll: netconsole: remote IPv4 address 192.168.10.10 [ 20.176475] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff [ 20.184382] netpoll: netconsole: device eth0 not up yet, forcing it [ 20.192896] ata1.00: hard resetting link [ 20.273248] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.543223] ata1.01: hard resetting link [ 21.052714] ata1.02: hard resetting link [ 21.562711] ata1.03: hard resetting link [ 22.092675] ata1.01: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 22.098660] ata1.01: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 22.122671] ata1.01: configured for UDMA/133 [ 22.126935] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled [ 22.136667] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.145845] console [netcon0] enabled [ 22.149496] netconsole: network logging started [ 22.154156] ata1.02: ATA-8: MB1000GCEEK, HPG1, max UDMA/133 [ 22.159718] ata1.02: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 22.167257] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 22.174395] rtc-mv rtc-mv: setting system clock to 2015-05-19 08:28:48 UTC (1432024128) [ 22.182741] ata1.02: configured for UDMA/133 [ 22.202711] ata1.03: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 22.208718] ata1.03: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 22.232681] ata1.03: configured for UDMA/133 [ 22.237136] ata1: EH complete [ 22.252726] scsi 0:1:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 22.261306] fvdw1 disk index before get_sd_name = 0 [ 22.266274] device-name= sata_mv [ 22.269508] fvdw2 disk index after get_sd_name = 2 [ 22.274329] fvdw3 prefix[0]=s prefix[1]=d [ 22.278423] fvdw4 diskname = sdc [ 22.282137] sd 0:1:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 22.290369] scsi 0:2:0:0: Direct-Access ATA MB1000GCEEK HPG1 PQ: 0 ANSI: 5 [ 22.298764] sd 0:1:0:0: [sdc] Write Protect is off [ 22.303991] sd 0:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 22.304112] sd 0:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.313274] fvdw1 disk index before get_sd_name = 1 [ 22.318152] device-name= sata_mv [ 22.321379] fvdw2 disk index after get_sd_name = 1 [ 22.327150] fvdw3 prefix[0]=s prefix[1]=d [ 22.331253] fvdw4 diskname = sdb [ 22.335023] sd 0:2:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 22.343531] scsi 0:3:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 22.351992] sd 0:2:0:0: [sdb] Write Protect is off [ 22.357247] sd 0:2:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 22.357375] sd 0:2:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 22.366605] fvdw1 disk index before get_sd_name = 2 [ 22.371610] device-name= sata_mv [ 22.374899] fvdw2 disk index after get_sd_name = 0 [ 22.379678] fvdw3 prefix[0]=s prefix[1]=d [ 22.384789] fvdw4 diskname = sda [ 22.388507] sd 0:3:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 22.397017] sd 0:3:0:0: [sda] Write Protect is off [ 22.401850] sdc: sdc1 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 > sdc2 [ 22.407722] sd 0:3:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.407836] sd 0:3:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.420880] sd 0:1:0:0: [sdc] Attached SCSI disk [ 22.453000] sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 > sdb2 [ 22.458863] sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 > sda2 [ 22.469238] sd 0:2:0:0: [sdb] Attached SCSI disk [ 22.474842] sd 0:3:0:0: [sda] Attached SCSI disk [ 22.902467] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 22.909416] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 22.924983] ata2.00: hard resetting link [ 23.273193] ata2.01: hard resetting link [ 23.782712] ata2.02: hard resetting link [ 24.292709] ata2.03: hard resetting link [ 24.662672] ata2.01: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 24.668680] ata2.01: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 24.692672] ata2.01: configured for UDMA/133 [ 24.712657] ata2.02: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 24.718652] ata2.02: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 24.742669] ata2.02: configured for UDMA/133 [ 24.747123] ata2: EH complete [ 24.762755] scsi 1:1:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 24.771426] fvdw1 disk index before get_sd_name = 3 [ 24.776355] device-name= sata_mv [ 24.779589] fvdw2 disk index after get_sd_name = 4 [ 24.784411] fvdw3 prefix[0]=s prefix[1]=d [ 24.788508] fvdw4 diskname = sde [ 24.792226] sd 1:1:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 24.800463] scsi 1:2:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 24.808852] sd 1:1:0:0: [sde] Write Protect is off [ 24.814085] sd 1:1:0:0: [sde] Mode Sense: 00 3a 00 00 [ 24.814208] sd 1:1:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.823362] fvdw1 disk index before get_sd_name = 4 [ 24.828237] device-name= sata_mv [ 24.831464] fvdw2 disk index after get_sd_name = 3 [ 24.837236] fvdw3 prefix[0]=s prefix[1]=d [ 24.841338] fvdw4 diskname = sdd [ 24.845106] sd 1:2:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 24.853623] sd 1:2:0:0: [sdd] Write Protect is off [ 24.858514] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 24.858627] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.901040] sde: sde1 < sde5 sde6 sde7 sde8 sde9 sde10 > sde2 [ 24.909699] sd 1:1:0:0: [sde] Attached SCSI disk [ 24.929953] sdd: sdd1 < sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 > sdd2 [ 24.938492] sd 1:2:0:0: [sdd] Attached SCSI disk [ 24.948452] Freeing unused kernel memory: 1860K (c0729000 - c08fa000) [ 86.912599] random: nonblocking pool is initialized [ 103.027795] md: md0 stopped. [ 103.034156] md: bind<sdb2> [ 103.037365] md: bind<sdc2> [ 103.040531] md: bind<sdd2> [ 103.043736] md: bind<sda2> [ 103.047584] md/raid:md0: device sda2 operational as raid disk 0 [ 103.053597] md/raid:md0: device sdd2 operational as raid disk 3 [ 103.059516] md/raid:md0: device sdc2 operational as raid disk 2 [ 103.065469] md/raid:md0: device sdb2 operational as raid disk 1 [ 103.072899] md/raid:md0: allocated 0kB [ 103.076718] md/raid:md0: raid level 5 active with 4 out of 5 devices, algorithm 2 [ 103.084217] RAID conf printout: [ 103.084228] --- level:5 rd:5 wd:4 [ 103.084237] disk 0, o:1, dev:sda2 [ 103.084245] disk 1, o:1, dev:sdb2 [ 103.084253] disk 2, o:1, dev:sdc2 [ 103.084261] disk 3, o:1, dev:sdd2 [ 103.084433] md0: detected capacity change from 0 to 3992583405568 [ 116.956910] md0: unknown partition table [ 116.963364] XFS (md0): Mounting Filesystem [ 117.256479] XFS (md0): Starting recovery (logdev: internal) [ 117.274357] XFS (md0): resetting quota flags [ 117.866910] XFS (md0): Ending recovery (logdev: internal)

by **Jocko** » Tue May 19, 2015 8:49 am

So usb-storage seems to be here.

Your dmesg output is it after plugging your disk ?

by **pacco** » Tue May 19, 2015 8:51 am

Jocko wrote:So usb-storage seems to be here.

Your dmesg output is it after plugging your disk ?

Yes, disk is connected to usb. Disk led is blinking.

Should I reboot and change order of action?

plugout.net

Cannot access 5big network 2

Re: Cannot access 5big network 2

Re: Cannot access 5big network 2

Re: Cannot access 5big network 2

Re: Cannot access 5big network 2

Re: Cannot access 5big network 2

Re: Cannot access 5big network 2

Re: Cannot access 5big network 2

Re: Cannot access 5big network 2

Re: Cannot access 5big network 2

Re: Cannot access 5big network 2

Who is online