5Big Network 2 ErikT 2

[fvdw]

I am busy right now with compilining some other stuff, but I will try to do it this evening, it merely only adating the init script in the kernel to bring up eth1 instead of eth0

[Jocko]

Jocko has done some work there

@fvdw

Attached some files updated for using eth1 instead of eth0.
These files must be used after installing firmware version 15.0 by using the fvdwsl console

[fvdw]

thanks Jocko

attached a standalone kernel that should enable LAN port 2 (ETH1) to use it put it in the fvdw-sl tftp folder and choose this kernel when starting standalone kernel

ps this kernel is useless on other devices then 5big2 as al others have only one LAN port

[Jocko]

These files must be used after installing firmware version 15.0 by using the fvdwsl console

a few more information

if you don't install it you can never get access to your NAS. At least the file laniffunc_configure.finc must be upload from the fvdw-sl console before rebooting the NAS.

[ErickT]

Well guys, thank you very much for everything, I guess my lacie unit may be has serious issues, because still with the kernel that you provide, still no answer in the kernel not even shows the ip in router.

I guess we will have to say that it's ovewith it.

Thank you somucho guys.

[fvdw]

pity to hear that. It might be possible to bring it back to live by using an usb-lan dongle in case the two lan ports are gone.