Alternative firmware fvdw-sl SPD8020, Lacie network space vs1,vs2 and max, 5big version 1&2, 2big version 1&2, internet space vs1, edmini_v2, D2 network version 1&2, raspberry Pi b
I am busy right now with compilining some other stuff, but I will try to do it this evening, it merely only adating the init script in the kernel to bring up eth1 instead of eth0
Attached some files updated for using eth1 instead of eth0. These files must be used after installing firmware version 15.0 by using the fvdwsl console
You do not have the required permissions to view the files attached to this post.
attached a standalone kernel that should enable LAN port 2 (ETH1) to use it put it in the fvdw-sl tftp folder and choose this kernel when starting standalone kernel
ps this kernel is useless on other devices then 5big2 as al others have only one LAN port
You do not have the required permissions to view the files attached to this post.
Jocko wrote:These files must be used after installing firmware version 15.0 by using the fvdwsl console
a few more information
if you don't install it you can never get access to your NAS. At least the file laniffunc_configure.finc must be upload from the fvdw-sl console before rebooting the NAS.
Well guys, thank you very much for everything, I guess my lacie unit may be has serious issues, because still with the kernel that you provide, still no answer in the kernel not even shows the ip in router.