well here it is
1.
Install fvdw-sl console (version 5.1) on your pc running windows
2.
Switch off 5big2 be sure it is connected to the LAN (ip range of dhcp server must be (192.168.1.xxx or 192.168.0.xxx)
system disk is sda (installed in first slot of 5big2) only one disk installed
3.
Start fvdw-sl console on your windows pc and chose load standalone kernel
choose kernel ...-164-standalone) via fvdw-sl console (help see fvdw-sl help menu)
4.
Start 5big2 when the fvdw-sl console is waiting for u-boot (see help fvdw-sl console)
It will interupt the boot of the 5big2 and start uploading the kernel automatically
wait until it has uploaded the kernel and telnet client starts
Log in with tel net client after standalone kernel has started
username: root
password: giveit2me
5.
When logged in with telnet partition the disk using gdisk
to start gdisks enter in telenet client at linux command prompt
- Code: Select all
gdisk /dev/sda
delete all partitions if they are present using d command of gdisk
check if no partition table is present by typing "p" command in gdisk
If it is empty and has no partition table create a new GPT partiton table
These are the commands needed in gdisk
- Code: Select all
Command (? for help): n
5
(accept the default first sector by pressing enter)
+256M
8200
n
6
(accept the default first sector by pressing enter)
+16M
(accept the default by pressing enter)
n
7
(accept the default first sector by pressing enter)
+16M
(press enter)
n
8
(accept the default first sector by pressing enter)
+884M
(press enter)
n
9
(accept the default first sector by pressing enter)
+884M
(press enter)
n
10
(accept the default first sector by pressing enter)
+16M
(press enter)
n
2
(accept the default first sector by pressing enter)
(accept the default last sector by pressing enter)
(press enter)
check if the new table is ok
- Code: Select all
Command (? for help): p
this gives as output
- Code: Select all
Disk /dev/sdb: 976773168 sectors, 465.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 976773134
Partitions will be aligned on 2048-sector boundaries
Total free space is 2014 sectors (1007.0 KiB)
Number Start (sector) End (sector) Size Code Name
2 4245504 976773134 463.7 GiB 8300 Linux filesystem
5 2048 526335 256.0 MiB 8200 Linux swap
6 526336 559103 16.0 MiB 8300 Linux filesystem
7 559104 591871 16.0 MiB 8300 Linux filesystem
8 591872 2402303 884.0 MiB 8300 Linux filesystem
9 2402304 4212735 884.0 MiB 8300 Linux filesystem
10 4212736 4245503 16.0 MiB 8300 Linux filesystem
Command (? for help):
when it looks likes this enter "w" to write the partition table to disk, answer Y on the question Do you want to proceed? (Y/N)
and then "q" to leave gdisk (without the quotes)
6.
Now we need to format a few partitions
on linux command line give commands to format partitions 7 , 8 and 9
- Code: Select all
mke2fs-64 -j -m 1 /dev/sda7
mke2fs-64 -j -m 1 /dev/sda8
mke2fs-64 -j -m 1 /dev/sda9
Format partition 2 in xfs you need program mks.xfs to do this, upload it via tftp
Give in tenlet client on linux command prompt the commands
- Code: Select all
tftp -l /sbin/mkfs.xfs -r mkfs.xfs -g pc-ip
(replace ip-pc by actual ip addres of your pc running the tftp server of the fvdw-sl console)
Make it executable:
- Code: Select all
chmode 755 /sbin/mkfs.xfs
format partiton 2;
- Code: Select all
mkfs.xfs /dev/sda2
7.
Next we write the lacie firmware and kernel to the partitions
Put the files in the tfpt subfolder of the folder where you installed the fvdw-sl console
upload files system for partition 7:
- Code: Select all
tftp -l sda7.tgz -r 5big2-sda7.tar.gz -g ip-pc
(replace ip-pc by actual ip addres of your pc running the tftp server of the fvdw-sl console)
write it to partition 7:
- Code: Select all
mkdir sda7
mount /dev/sda7 /sda7
tar -xzvf sda7.tgz -C /sda7
umount /sda7
rm sda7.tgz
similar for partition 8:
- Code: Select all
tftp -l sda8.tgz -r 5big2-sda8.tar.gz -g ip-pc
(replace ip-pc by actual ip addres of your pc running the tftp server of the fvdw-sl console)
- Code: Select all
mkdir sda8
mount /dev/sda8 /sda8
tar -xzvf sda8.tgz -C /sda8
umount /sda8
rm sda8.tgz
upload the kernel and write it to partition 6:
- Code: Select all
tftp -l sda6.img -r sda6-5big2.img -g ip-pc
(replace ip-pc by actual ip address of your pc running the tftp server of the fvdw-sl console)
- Code: Select all
dd if=sda6.img of=/dev/sda6
rm sda6.img
done
reboot your 5big2 by enetering in the telnet client
- Code: Select all
reboot -f
It should come up now with the (crap) lacie firmware
I will send you the necessary files by pm